Thickness of Plate given Area of Double Fillet Lap Joint Weld Calculator

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%
✖The Length of Weld is the linear distance of each weld segment.ⓘ Length of Weld [l]			+10% -10%

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate given Area of Double Fillet Lap Joint Weld [t_plate]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Thickness of Plate given Area of Double Fillet Lap Joint Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
t_plate = A_{weld bed}/(1.414*l)
This formula uses 3 Variables

Variables Used

Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.

STEP 1: Convert Input(s) to Base Unit

Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Length of Weld: 8 Millimeter --> 0.008 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_plate = A_{weld bed}/(1.414*l) --> 0.0009/(1.414*0.008)

Evaluating ... ...

t_plate = 0.0795615275813296

STEP 3: Convert Result to Output's Unit

0.0795615275813296 Meter -->79.5615275813296 Millimeter (Check conversion here)

FINAL ANSWER

79.5615275813296 ≈ 79.56153 Millimeter <-- Thickness of Plate

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Mechanical » Thickness of Plate » Thickness of Plate given Area of Double Fillet Lap Joint Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Thickness of Plate Calculators

Thickness of Plate given Area of Double Fillet Lap Joint Weld

LaTeX Go Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)

Thickness of Plate given Area of Single Fillet Lap Joint Weld

LaTeX Go Thickness of Plate = Weld Bed Area/(0.707*Length of Weld)

Thickness of Plate given Area of Parallel Fillet Weld

LaTeX Go Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)

Thickness of Plate given Throat Thickness for Fillet Weld

LaTeX Go Thickness of Plate = Throat Thickness/0.707

Thickness of Plate given Area of Double Fillet Lap Joint Weld Formula

LaTeX Go

Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
t_plate = A_{weld bed}/(1.414*l)

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Thickness of Plate given Area of Double Fillet Lap Joint Weld?

Thickness of Plate given Area of Double Fillet Lap Joint Weld calculator uses Thickness of Plate = Weld Bed Area/(1.414*Length of Weld) to calculate the Thickness of Plate, Thickness of plate given area of double fillet lap joint weld is the distance through the plate, as distinct from width or height. Thickness of Plate is denoted by t_plate symbol.

How to calculate Thickness of Plate given Area of Double Fillet Lap Joint Weld using this online calculator? To use this online calculator for Thickness of Plate given Area of Double Fillet Lap Joint Weld, enter Weld Bed Area (A_{weld bed}) & Length of Weld (l) and hit the calculate button. Here is how the Thickness of Plate given Area of Double Fillet Lap Joint Weld calculation can be explained with given input values -> 79561.53 = 0.0009/(1.414*0.008).

FAQ

What is Thickness of Plate given Area of Double Fillet Lap Joint Weld?

Thickness of plate given area of double fillet lap joint weld is the distance through the plate, as distinct from width or height and is represented as t_plate = A_{weld bed}/(1.414*l) or Thickness of Plate = Weld Bed Area/(1.414*Length of Weld). Weld Bed Area is that area which is prepared by joining two metals for welding & The Length of Weld is the linear distance of each weld segment.

How to calculate Thickness of Plate given Area of Double Fillet Lap Joint Weld?

Thickness of plate given area of double fillet lap joint weld is the distance through the plate, as distinct from width or height is calculated using Thickness of Plate = Weld Bed Area/(1.414*Length of Weld). To calculate Thickness of Plate given Area of Double Fillet Lap Joint Weld, you need Weld Bed Area (A_{weld bed}) & Length of Weld (l). With our tool, you need to enter the respective value for Weld Bed Area & Length of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Plate?

In this formula, Thickness of Plate uses Weld Bed Area & Length of Weld. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
Thickness of Plate = Weld Bed Area/(0.707*Length of Weld)
Thickness of Plate = Throat Thickness/0.707

Home

FREE PDFs

🔍 Search