Thickness of main plate given thickness of cover plate for butt joint with double cover plate Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickness of Plate = Thickness of Cover Plate/0.625
tplate = hc/0.625
This formula uses 2 Variables
Variables Used
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Thickness of Cover Plate - (Measured in Meter) - The Thickness of Cover Plate is defined as thickness of cover plates for butt joints.
STEP 1: Convert Input(s) to Base Unit
Thickness of Cover Plate: 7.5 Millimeter --> 0.0075 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tplate = hc/0.625 --> 0.0075/0.625
Evaluating ... ...
tplate = 0.012
STEP 3: Convert Result to Output's Unit
0.012 Meter -->12 Millimeter (Check conversion ​here)
FINAL ANSWER
12 Millimeter <-- Thickness of Plate
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Design of Riveted Joint Calculators

Diameter of rivet(for dimension in cm)
​ Go Rivet Diameter = 1.6*sqrt(Thickness of Plate)
Diameter of rivet
​ Go Rivet Diameter = 6*sqrt(Thickness of Plate)
Thickness of main plate(for dimension in cm)
​ Go Thickness of Plate = (Rivet Diameter/1.6)^2
Thickness of main plate(for dimension in mm)
​ Go Thickness of Plate = (Rivet Diameter/6)^2

Thickness of main plate given thickness of cover plate for butt joint with double cover plate Formula

​Go
Thickness of Plate = Thickness of Cover Plate/0.625
tplate = hc/0.625

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Thickness of main plate given thickness of cover plate for butt joint with double cover plate?

Thickness of main plate given thickness of cover plate for butt joint with double cover plate calculator uses Thickness of Plate = Thickness of Cover Plate/0.625 to calculate the Thickness of Plate, The Thickness of main plate given thickness of cover plate for butt joint with double cover plate formula is defined as the distance through the plate, as distinct from width or height. Thickness of Plate is denoted by tplate symbol.

How to calculate Thickness of main plate given thickness of cover plate for butt joint with double cover plate using this online calculator? To use this online calculator for Thickness of main plate given thickness of cover plate for butt joint with double cover plate, enter Thickness of Cover Plate (hc) and hit the calculate button. Here is how the Thickness of main plate given thickness of cover plate for butt joint with double cover plate calculation can be explained with given input values -> 22400 = 0.0075/0.625.

FAQ

What is Thickness of main plate given thickness of cover plate for butt joint with double cover plate?
The Thickness of main plate given thickness of cover plate for butt joint with double cover plate formula is defined as the distance through the plate, as distinct from width or height and is represented as tplate = hc/0.625 or Thickness of Plate = Thickness of Cover Plate/0.625. The Thickness of Cover Plate is defined as thickness of cover plates for butt joints.
How to calculate Thickness of main plate given thickness of cover plate for butt joint with double cover plate?
The Thickness of main plate given thickness of cover plate for butt joint with double cover plate formula is defined as the distance through the plate, as distinct from width or height is calculated using Thickness of Plate = Thickness of Cover Plate/0.625. To calculate Thickness of main plate given thickness of cover plate for butt joint with double cover plate, you need Thickness of Cover Plate (hc). With our tool, you need to enter the respective value for Thickness of Cover Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickness of Plate?
In this formula, Thickness of Plate uses Thickness of Cover Plate. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Thickness of Plate = (Rivet Diameter/1.6)^2
  • Thickness of Plate = (Rivet Diameter/6)^2
  • Thickness of Plate = Thickness of Cover Plate/1.125
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!