Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Tensile Stress in Eye of Knuckle Joint is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension.ⓘ Tensile Stress in Eye of Knuckle Joint [σ_te]			+10% -10%
✖Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.ⓘ Outer Diameter of Eye of Knuckle Joint [d_o]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye [b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
b = L/(σ_te*(d_o-d))
This formula uses 5 Variables

Variables Used

Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Tensile Stress in Eye of Knuckle Joint - (Measured in Pascal) - Tensile Stress in Eye of Knuckle Joint is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Tensile Stress in Eye of Knuckle Joint: 45 Newton per Square Millimeter --> 45000000 Pascal (Check conversion here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

b = L/(σ_te*(d_o-d)) --> 45000/(45000000*(0.08-0.037))

Evaluating ... ...

b = 0.0232558139534884

STEP 3: Convert Result to Output's Unit

0.0232558139534884 Meter -->23.2558139534884 Millimeter (Check conversion here)

FINAL ANSWER

23.2558139534884 ≈ 23.25581 Millimeter <-- Thickess of Eye of Knuckle Joint

(Calculation completed in 00.008 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Eye » Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Eye Calculators

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

LaTeX Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

LaTeX Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye Formula

LaTeX Go

Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
b = L/(σ_te*(d_o-d))

Parts of the knuckle joint

A knuckle joint always has a fork end, an eye end, and a pin. Typically, these are all specially made parts although standard rod ends are sometimes used for the eye end. This has the advantage that a rod end allows some additional rotational movement perpendicular to the pin axis, providing further protection against bending stress.
Various types of pins can also be used. The most common is a special pin with a shoulder at one end and a cross hole at the other to accept a collar and split pint. For large structures, such as bridges, cold rivets were historically used. The pivot may also be bolted.

How to Calculate Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye?

Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye calculator uses Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Thickess of Eye of Knuckle Joint, The Thickness of eye end of knuckle joint given tensile stress in eye is the thickness of the eye of the non-forked part of a knuckle joint and is measured along the eye hole axis. Thickess of Eye of Knuckle Joint is denoted by b symbol.

How to calculate Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye using this online calculator? To use this online calculator for Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye, enter Load on Knuckle Joint (L), Tensile Stress in Eye of Knuckle Joint (σ_te), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye calculation can be explained with given input values -> 25839.79 = 45000/(45000000*(0.08-0.037)).

FAQ

What is Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye?

The Thickness of eye end of knuckle joint given tensile stress in eye is the thickness of the eye of the non-forked part of a knuckle joint and is measured along the eye hole axis and is represented as b = L/(σ_te*(d_o-d)) or Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Tensile Stress in Eye of Knuckle Joint is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye?

The Thickness of eye end of knuckle joint given tensile stress in eye is the thickness of the eye of the non-forked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). To calculate Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye, you need Load on Knuckle Joint (L), Tensile Stress in Eye of Knuckle Joint (σ_te), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Tensile Stress in Eye of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickess of Eye of Knuckle Joint?

In this formula, Thickess of Eye of Knuckle Joint uses Load on Knuckle Joint, Tensile Stress in Eye of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Home

FREE PDFs

🔍 Search