Thickness of Eye End of Knuckle Joint given Shear Stress in Eye Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.ⓘ Shear Stress in Eye of Knuckle Joint [τ_e]			+10% -10%
✖Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.ⓘ Outer Diameter of Eye of Knuckle Joint [d_o]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickness of Eye End of Knuckle Joint given Shear Stress in Eye [b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Thickness of Eye End of Knuckle Joint given Shear Stress in Eye Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
b = L/(τ_e*(d_o-d))
This formula uses 5 Variables

Variables Used

Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Shear Stress in Eye of Knuckle Joint - (Measured in Pascal) - Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Shear Stress in Eye of Knuckle Joint: 24 Newton per Square Millimeter --> 24000000 Pascal (Check conversion here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

b = L/(τ_e*(d_o-d)) --> 45000/(24000000*(0.08-0.037))

Evaluating ... ...

b = 0.0436046511627907

STEP 3: Convert Result to Output's Unit

0.0436046511627907 Meter -->43.6046511627907 Millimeter (Check conversion here)

FINAL ANSWER

43.6046511627907 ≈ 43.60465 Millimeter <-- Thickess of Eye of Knuckle Joint

(Calculation completed in 00.535 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Eye » Thickness of Eye End of Knuckle Joint given Shear Stress in Eye

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Eye Calculators

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

LaTeX Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

LaTeX Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Thickness of Eye End of Knuckle Joint given Shear Stress in Eye Formula

LaTeX Go

Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
b = L/(τ_e*(d_o-d))

What is a knuckle joint?

A knuckle joint is a type of pin joint used to join two components that are loaded in tension. One component has a fork with a hole passing through both sides, forming a double eye, while the other component has a single eye.
The single eye is inserted between the double eyes so that all three holes are concentric and a pin is used to secure the components.
Knuckle joints are often used to connect rods subjected to tension in structures such as roof tiles, bridges, and cranes. The links of a chain are also considered a series of knuckle joints.

How to Calculate Thickness of Eye End of Knuckle Joint given Shear Stress in Eye?

Thickness of Eye End of Knuckle Joint given Shear Stress in Eye calculator uses Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Thickess of Eye of Knuckle Joint, The Thickness of eye end of knuckle joint given shear stress in eye is the thickness of the eye of the non forked part of a knuckle joint and is measured along the eye hole axis. Thickess of Eye of Knuckle Joint is denoted by b symbol.

How to calculate Thickness of Eye End of Knuckle Joint given Shear Stress in Eye using this online calculator? To use this online calculator for Thickness of Eye End of Knuckle Joint given Shear Stress in Eye, enter Load on Knuckle Joint (L), Shear Stress in Eye of Knuckle Joint (τ_e), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Thickness of Eye End of Knuckle Joint given Shear Stress in Eye calculation can be explained with given input values -> 48449.61 = 45000/(24000000*(0.08-0.037)).

FAQ

What is Thickness of Eye End of Knuckle Joint given Shear Stress in Eye?

The Thickness of eye end of knuckle joint given shear stress in eye is the thickness of the eye of the non forked part of a knuckle joint and is measured along the eye hole axis and is represented as b = L/(τ_e*(d_o-d)) or Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Thickness of Eye End of Knuckle Joint given Shear Stress in Eye?

The Thickness of eye end of knuckle joint given shear stress in eye is the thickness of the eye of the non forked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). To calculate Thickness of Eye End of Knuckle Joint given Shear Stress in Eye, you need Load on Knuckle Joint (L), Shear Stress in Eye of Knuckle Joint (τ_e), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Shear Stress in Eye of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickess of Eye of Knuckle Joint?

In this formula, Thickess of Eye of Knuckle Joint uses Load on Knuckle Joint, Shear Stress in Eye of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Home

FREE PDFs

🔍 Search