Thickness of Eye End of Knuckle Joint given Bending Stress in Pin Calculator

✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%
✖Bending Stress in Knuckle Pin is the amount of bending stress induced into the knuckle pin when the knuckle joint is subjected to axial loading resulting in a bending moment.ⓘ Bending Stress in Knuckle Pin [σ_b]			+10% -10%
✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Fork Eye of Knuckle Joint [a]			+10% -10%

✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickness of Eye End of Knuckle Joint given Bending Stress in Pin [b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
b = 4*((pi*d^3*σ_b)/(16*L)-a/3)
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
Bending Stress in Knuckle Pin - (Measured in Pascal) - Bending Stress in Knuckle Pin is the amount of bending stress induced into the knuckle pin when the knuckle joint is subjected to axial loading resulting in a bending moment.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.

STEP 1: Convert Input(s) to Base Unit

Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)
Bending Stress in Knuckle Pin: 90 Newton per Square Millimeter --> 90000000 Pascal (Check conversion here)
Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Thickess of Fork Eye of Knuckle Joint: 26.6 Millimeter --> 0.0266 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

b = 4*((pi*d^3*σ_b)/(16*L)-a/3) --> 4*((pi*0.037^3*90000000)/(16*45000)-0.0266/3)

Evaluating ... ...

b = 0.0440988796744752

STEP 3: Convert Result to Output's Unit

0.0440988796744752 Meter -->44.0988796744752 Millimeter (Check conversion here)

FINAL ANSWER

44.0988796744752 ≈ 44.09888 Millimeter <-- Thickess of Eye of Knuckle Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Eye » Thickness of Eye End of Knuckle Joint given Bending Stress in Pin

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Eye Calculators

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

LaTeX Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

LaTeX Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin Formula

LaTeX Go

Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
b = 4*((pi*d^3*σ_b)/(16*L)-a/3)

Advantages of Knuckle Joint

1.Knuckle joint can withstand large tensile loads.
2.It has good mechanical rigidity.
3.Also, it is simple to manufacture and set up.
4.It can be easily assembled and dismantled.
5.Design is simple and easy.
6.Fewer parts are less costly and more reliable.
7.It can permit angular movement between rods.
8.High repeating accuracy even with varying material thickness and tensile strengths.
9.Reduced impact shock and high system rigidity.
10.Long tool life.

How to Calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin?

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin calculator uses Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3) to calculate the Thickess of Eye of Knuckle Joint, The Thickness of eye end of knuckle joint given bending stress in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis. Thickess of Eye of Knuckle Joint is denoted by b symbol.

How to calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin using this online calculator? To use this online calculator for Thickness of Eye End of Knuckle Joint given Bending Stress in Pin, enter Diameter of Knuckle Pin (d), Bending Stress in Knuckle Pin (σ_b), Load on Knuckle Joint (L) & Thickess of Fork Eye of Knuckle Joint (a) and hit the calculate button. Here is how the Thickness of Eye End of Knuckle Joint given Bending Stress in Pin calculation can be explained with given input values -> 36142.33 = 4*((pi*0.037^3*90000000)/(16*45000)-0.0266/3).

FAQ

What is Thickness of Eye End of Knuckle Joint given Bending Stress in Pin?

The Thickness of eye end of knuckle joint given bending stress in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis and is represented as b = 4*((pi*d^3*σ_b)/(16*L)-a/3) or Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3). Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint, Bending Stress in Knuckle Pin is the amount of bending stress induced into the knuckle pin when the knuckle joint is subjected to axial loading resulting in a bending moment, Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts & Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.

How to calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin?

The Thickness of eye end of knuckle joint given bending stress in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3). To calculate Thickness of Eye End of Knuckle Joint given Bending Stress in Pin, you need Diameter of Knuckle Pin (d), Bending Stress in Knuckle Pin (σ_b), Load on Knuckle Joint (L) & Thickess of Fork Eye of Knuckle Joint (a). With our tool, you need to enter the respective value for Diameter of Knuckle Pin, Bending Stress in Knuckle Pin, Load on Knuckle Joint & Thickess of Fork Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickess of Eye of Knuckle Joint?

In this formula, Thickess of Eye of Knuckle Joint uses Diameter of Knuckle Pin, Bending Stress in Knuckle Pin, Load on Knuckle Joint & Thickess of Fork Eye of Knuckle Joint. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Home

FREE PDFs

🔍 Search