HCF calculator

Thickness of Cell given Slope Calculator

Chemistry Engineering Financial Health More >>

↳

Photochemistry Analytical chemistry Atmospheric Chemistry Atomic structure More >>

⤿

Beer Lambert law Stark Einstein law Stefan–Boltzmann Law

✖The Slope of Line is a number that measures its "steepness", usually denoted by the letter m. It is the change in y for a unit change in x along the line.ⓘ Slope of Line [m]			+10% -10%
✖The Molar Extinction Coefficient is a measure of how strongly a chemical species or substance absorbs light at a particular wavelength.ⓘ Molar Extinction Coefficient [ε]			+10% -10%

✖Thickness of Cell is useful in calculating the concentration of a solution on the basis of its light absorption.ⓘ Thickness of Cell given Slope [l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemistry Formula PDF PDF Image

Thickness of Cell given Slope Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Cell = Slope of Line/Molar Extinction Coefficient
l = m/ε
This formula uses 3 Variables

Variables Used

Thickness of Cell - (Measured in Meter) - Thickness of Cell is useful in calculating the concentration of a solution on the basis of its light absorption.
Slope of Line - The Slope of Line is a number that measures its "steepness", usually denoted by the letter m. It is the change in y for a unit change in x along the line.
Molar Extinction Coefficient - (Measured in Square Meter per Mole) - The Molar Extinction Coefficient is a measure of how strongly a chemical species or substance absorbs light at a particular wavelength.

STEP 1: Convert Input(s) to Base Unit

Slope of Line: 4 --> No Conversion Required
Molar Extinction Coefficient: 19 Square Centimeter per Mole --> 0.0019 Square Meter per Mole (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l = m/ε --> 4/0.0019

Evaluating ... ...

l = 2105.26315789474

STEP 3: Convert Result to Output's Unit

2105.26315789474 Meter -->2105263157894.74 Nanometer (Check conversion here)

FINAL ANSWER

2105263157894.74 ≈ 2.1E+12 Nanometer <-- Thickness of Cell

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Photochemistry » Beer Lambert law » Thickness of Cell given Slope

Credits

Created by Akshada Kulkarni

National Institute of Information Technology (NIIT), Neemrana

Akshada Kulkarni has created this Calculator and 500+ more calculators!

Verified by Prashant Singh

K J Somaiya College of science (K J Somaiya), Mumbai

Prashant Singh has verified this Calculator and 500+ more calculators!

< Beer Lambert law Calculators

Concentration of Solution

LaTeX Go Concentration of Solution = Absorbance/(Thickness of Cell*Molar Extinction Coefficient)

Beer-Lambert law given Intensity of Radiation

LaTeX Go Absorbance = log10(Intensity of Incident Radiation/Intensity of Transmitted Radiation)

Absorbance using Beer-Lambert Law

LaTeX Go Absorbance = Molar Extinction Coefficient*Concentration of Solution*Thickness of Cell

Intensity of Incident Radiation

LaTeX Go Intensity of Incident Radiation = Intensity of Transmitted Radiation*10^(Absorbance)

Thickness of Cell given Slope Formula

LaTeX Go

Thickness of Cell = Slope of Line/Molar Extinction Coefficient
l = m/ε

What is Beer- Lambert Law?

Beer-Lambert law is useful in calculating the concentration of a solution on the basis of its light absorption. This law relates the intensity of the transmitted monochromatic light to the concentration of the solution and the thickness of the cell in which the solution is kept.
The molar extinction coefficient of a substance can be determined using a colorimeter or a spectrophotometer as follows. The absorbances of a solution are measured at different
known concentrations using a cell of known thickness (l). The plot of absorbance, A against Concentration of solution, c gives a straight line and its slope is equal to εl.

Define Photochemistry.

In photochemistry, we study the absorption and emission of light by matter. It consists of the study of various photo physical processes and photochemical reactions. Two important photo physical processes are fluorescence and phosphorescence. During fluorescence, light emission takes place in the presence of exciting radiation; but the light emission stops, once the exciting radiation is removed. In contrast to this, during phosphorescence, light emission takes place even after the removal of the exciting radiation.
In photochemical reactions, the substances acquire the necessary activation energy through light absorption. Again this is in contrast to the thermal reactions in which the reactants acquire their activation energy through collisions between molecules.

How to Calculate Thickness of Cell given Slope?

Thickness of Cell given Slope calculator uses Thickness of Cell = Slope of Line/Molar Extinction Coefficient to calculate the Thickness of Cell, The Thickness of cell given slope formula is useful in calculating the molar extinction coefficient on the basis of its light absorption. Thickness of Cell is denoted by l symbol.

How to calculate Thickness of Cell given Slope using this online calculator? To use this online calculator for Thickness of Cell given Slope, enter Slope of Line (m) & Molar Extinction Coefficient (ε) and hit the calculate button. Here is how the Thickness of Cell given Slope calculation can be explained with given input values -> 2.1E+21 = 4/0.0019.

FAQ

What is Thickness of Cell given Slope?

The Thickness of cell given slope formula is useful in calculating the molar extinction coefficient on the basis of its light absorption and is represented as l = m/ε or Thickness of Cell = Slope of Line/Molar Extinction Coefficient. The Slope of Line is a number that measures its "steepness", usually denoted by the letter m. It is the change in y for a unit change in x along the line & The Molar Extinction Coefficient is a measure of how strongly a chemical species or substance absorbs light at a particular wavelength.

How to calculate Thickness of Cell given Slope?

The Thickness of cell given slope formula is useful in calculating the molar extinction coefficient on the basis of its light absorption is calculated using Thickness of Cell = Slope of Line/Molar Extinction Coefficient. To calculate Thickness of Cell given Slope, you need Slope of Line (m) & Molar Extinction Coefficient (ε). With our tool, you need to enter the respective value for Slope of Line & Molar Extinction Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Cell?

In this formula, Thickness of Cell uses Slope of Line & Molar Extinction Coefficient. We can use 2 other way(s) to calculate the same, which is/are as follows -

Thickness of Cell = Absorbance/(Molar Extinction Coefficient*Concentration of Solution)
Thickness of Cell = log10(Intensity of Incident Radiation/Intensity of Transmitted Radiation)*(1/(Molar Extinction Coefficient*Concentration of Solution))

Home

FREE PDFs

🔍 Search