Thickness of Bottom Plate in T-Joints Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T Joint)/Transverse Shrinkage
tb = (1.02*ht)/s
This formula uses 3 Variables
Variables Used
Thickness of Bottom Plate - (Measured in Meter) - Thickness of Bottom Plate is the thickness of the plate that is being welded and placed flat on ground.
Length of Fillet Leg in T Joint - (Measured in Meter) - Length of Fillet Leg in T Joint is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other.
Transverse Shrinkage - (Measured in Meter) - Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.
STEP 1: Convert Input(s) to Base Unit
Length of Fillet Leg in T Joint: 0.01 Millimeter --> 1E-05 Meter (Check conversion ​here)
Transverse Shrinkage: 4 Millimeter --> 0.004 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tb = (1.02*ht)/s --> (1.02*1E-05)/0.004
Evaluating ... ...
tb = 0.00255
STEP 3: Convert Result to Output's Unit
0.00255 Meter -->2.55 Millimeter (Check conversion ​here)
FINAL ANSWER
2.55 Millimeter <-- Thickness of Bottom Plate
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verifier Image
Verified by Chilvera Bhanu Teja
Institute of Aeronautical Engineering (IARE), Hyderabad
Chilvera Bhanu Teja has verified this Calculator and 200+ more calculators!

T Joint with Two Fillets Calculators

Length of Fillet Leg from Transverse Shrinkage in T-Joints
​ LaTeX ​ Go Length of Fillet Leg in T Joint = (Transverse Shrinkage*Thickness of Bottom Plate)/1.02
Transverse Shrinkage in T-Joint with Two Fillets
​ LaTeX ​ Go Transverse Shrinkage = (1.02*Length of Fillet Leg in T Joint)/Thickness of Bottom Plate
Thickness of Bottom Plate in T-Joints
​ LaTeX ​ Go Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T Joint)/Transverse Shrinkage

Thickness of Bottom Plate in T-Joints Formula

​LaTeX ​Go
Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T Joint)/Transverse Shrinkage
tb = (1.02*ht)/s

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Thickness of Bottom Plate in T-Joints?

Thickness of Bottom Plate in T-Joints calculator uses Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T Joint)/Transverse Shrinkage to calculate the Thickness of Bottom Plate, Thickness of Bottom Plate in T-Joints is the thickness of that plate which is placed flat on ground while another plate is being welded on it placed vertically. Thickness of Bottom Plate is denoted by tb symbol.

How to calculate Thickness of Bottom Plate in T-Joints using this online calculator? To use this online calculator for Thickness of Bottom Plate in T-Joints, enter Length of Fillet Leg in T Joint (ht) & Transverse Shrinkage (s) and hit the calculate button. Here is how the Thickness of Bottom Plate in T-Joints calculation can be explained with given input values -> 2550 = (1.02*1E-05)/0.004.

FAQ

What is Thickness of Bottom Plate in T-Joints?
Thickness of Bottom Plate in T-Joints is the thickness of that plate which is placed flat on ground while another plate is being welded on it placed vertically and is represented as tb = (1.02*ht)/s or Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T Joint)/Transverse Shrinkage. Length of Fillet Leg in T Joint is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other & Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.
How to calculate Thickness of Bottom Plate in T-Joints?
Thickness of Bottom Plate in T-Joints is the thickness of that plate which is placed flat on ground while another plate is being welded on it placed vertically is calculated using Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T Joint)/Transverse Shrinkage. To calculate Thickness of Bottom Plate in T-Joints, you need Length of Fillet Leg in T Joint (ht) & Transverse Shrinkage (s). With our tool, you need to enter the respective value for Length of Fillet Leg in T Joint & Transverse Shrinkage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!