Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 Calculator

✖Depth of Water in Well 1 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer.ⓘ Depth of Water in Well 1 [h₁]			+10% -10%
✖Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.ⓘ Drawdown in Well 1 [s₁]			+10% -10%

✖Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below.ⓘ Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 [H]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Confined Aquifers Formulas PDF PDF Image

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Aquifer = Depth of Water in Well 1+Drawdown in Well 1
H = h₁+s₁
This formula uses 3 Variables

Variables Used

Thickness of Aquifer - (Measured in Meter) - Thickness of aquifer refers to the vertical distance between the top and bottom boundaries of the water-bearing layer, typically measured from the confining bed above to the confining bed below.
Depth of Water in Well 1 - (Measured in Meter) - Depth of Water in Well 1 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer.
Drawdown in Well 1 - (Measured in Meter) - Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.

STEP 1: Convert Input(s) to Base Unit

Depth of Water in Well 1: 17.85 Meter --> 17.85 Meter No Conversion Required
Drawdown in Well 1: 2.15 Meter --> 2.15 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H = h₁+s₁ --> 17.85+2.15

Evaluating ... ...

H = 20

STEP 3: Convert Result to Output's Unit

20 Meter --> No Conversion Required

FINAL ANSWER

20 Meter <-- Thickness of Aquifer

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Confined Aquifers » Radial Distance from Well And Thickness of Aquifer » Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Radial Distance from Well And Thickness of Aquifer Calculators

Radial Distance from Well 1 given Aquifer Constant

LaTeX Go Radial Distance at Observation Well 1 = Radial Distance at Observation Well 2/10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge)

Radial Distance from Well 2 given Aquifer Constant

LaTeX Go Radial Distance at Observation Well 2 = Radial Distance at Observation Well 1*10^((2.72*Aquifer Constant*(Drawdown in Well 1-Drawdown in Well 2))/Discharge)

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1

LaTeX Go Thickness of Aquifer = Depth of Water in Well 1+Drawdown in Well 1

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 2

LaTeX Go Thickness of Aquifer = Depth of Water in Well 2+Drawdown in Well 2

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 Formula

LaTeX Go

Thickness of Aquifer = Depth of Water in Well 1+Drawdown in Well 1
H = h₁+s₁

What is Aquifer?

An aquifer is a body of rock and/or sediment that holds groundwater. Groundwater is the word used to describe precipitation that has infiltrated the soil beyond the surface and collected in empty spaces underground.

How to Calculate Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1?

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 calculator uses Thickness of Aquifer = Depth of Water in Well 1+Drawdown in Well 1 to calculate the Thickness of Aquifer, Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 formula is defined as the distance from the impermeable layer to the bottom of the aquifer, which is a critical parameter in understanding the behavior of confined aquifers and their response to pumping. Thickness of Aquifer is denoted by H symbol.

How to calculate Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 using this online calculator? To use this online calculator for Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1, enter Depth of Water in Well 1 (h₁) & Drawdown in Well 1 (s₁) and hit the calculate button. Here is how the Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 calculation can be explained with given input values -> 20 = 17.85+2.15.

FAQ

What is Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1?

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 formula is defined as the distance from the impermeable layer to the bottom of the aquifer, which is a critical parameter in understanding the behavior of confined aquifers and their response to pumping and is represented as H = h₁+s₁ or Thickness of Aquifer = Depth of Water in Well 1+Drawdown in Well 1. Depth of Water in Well 1 refers to the vertical distance from the ground surface to the water level within a well that taps into a confined aquifer & Drawdown in Well 1 refers to the reduction in water level caused by pumping in a well.

How to calculate Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1?

Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1 formula is defined as the distance from the impermeable layer to the bottom of the aquifer, which is a critical parameter in understanding the behavior of confined aquifers and their response to pumping is calculated using Thickness of Aquifer = Depth of Water in Well 1+Drawdown in Well 1. To calculate Thickness of Aquifer from Impermeable Layer given Drawdown in Well 1, you need Depth of Water in Well 1 (h₁) & Drawdown in Well 1 (s₁). With our tool, you need to enter the respective value for Depth of Water in Well 1 & Drawdown in Well 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Aquifer?

In this formula, Thickness of Aquifer uses Depth of Water in Well 1 & Drawdown in Well 1. We can use 1 other way(s) to calculate the same, which is/are as follows -

Thickness of Aquifer = Depth of Water in Well 2+Drawdown in Well 2

Home

FREE PDFs

🔍 Search