Thickness given Maximum Bending Stress in Quarter Elliptical Spring Calculator

✖Spring Load is the instantaneous load applied perpendicular to the specimen cross section.ⓘ Spring Load [W_load]			+10% -10%
✖Length in Spring is the measurement or extent of something from end to end.ⓘ Length in Spring [L]			+10% -10%
✖Number of Plates is the count of plates in the leaf spring.ⓘ Number of Plates [n]			+10% -10%
✖Width of Cross Section is the geometric measurement or extent of the member from side to side.ⓘ Width of Cross Section [b]			+10% -10%
✖Maximum Bending Stress in Elliptical Spring is the maximum normal stress that is induced at a point in a body subjected to loads that cause it to bend.ⓘ Maximum Bending Stress in Elliptical Spring [f_{elliptical spring}]			+10% -10%

✖Thickness of Section is the dimension through an object, as opposed to length or width.ⓘ Thickness given Maximum Bending Stress in Quarter Elliptical Spring [t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Maximum Bending Stress in Spring Formulas PDF PDF Image

Thickness given Maximum Bending Stress in Quarter Elliptical Spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Section = sqrt((6*Spring Load*Length in Spring)/(Number of Plates*Width of Cross Section*Maximum Bending Stress in Elliptical Spring))
t = sqrt((6*W_load*L)/(n*b*f_{elliptical spring}))
This formula uses 1 Functions, 6 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Thickness of Section - (Measured in Meter) - Thickness of Section is the dimension through an object, as opposed to length or width.
Spring Load - (Measured in Newton) - Spring Load is the instantaneous load applied perpendicular to the specimen cross section.
Length in Spring - (Measured in Meter) - Length in Spring is the measurement or extent of something from end to end.
Number of Plates - Number of Plates is the count of plates in the leaf spring.
Width of Cross Section - (Measured in Meter) - Width of Cross Section is the geometric measurement or extent of the member from side to side.
Maximum Bending Stress in Elliptical Spring - (Measured in Pascal) - Maximum Bending Stress in Elliptical Spring is the maximum normal stress that is induced at a point in a body subjected to loads that cause it to bend.

STEP 1: Convert Input(s) to Base Unit

Spring Load: 85 Newton --> 85 Newton No Conversion Required
Length in Spring: 4170 Millimeter --> 4.17 Meter (Check conversion here)
Number of Plates: 8 --> No Conversion Required
Width of Cross Section: 300 Millimeter --> 0.3 Meter (Check conversion here)
Maximum Bending Stress in Elliptical Spring: 4187.736 Pascal --> 4187.736 Pascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t = sqrt((6*W_load*L)/(n*b*f_{elliptical spring})) --> sqrt((6*85*4.17)/(8*0.3*4187.736))

Evaluating ... ...

t = 0.460000016196361

STEP 3: Convert Result to Output's Unit

0.460000016196361 Meter -->460.000016196361 Millimeter (Check conversion here)

FINAL ANSWER

460.000016196361 ≈ 460 Millimeter <-- Thickness of Section

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Strength of Materials » Spring » Maximum Bending Stress in Spring » Quarter Elliptical Springs » Thickness given Maximum Bending Stress in Quarter Elliptical Spring

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Quarter Elliptical Springs Calculators

Number of Plates given Maximum Bending Stress in Quarter Elliptical Spring

LaTeX Go Number of Plates = (6*Spring Load*Length in Spring)/(Maximum Bending Stress in Elliptical Spring*Width of Cross Section*Thickness of Section^2)

Length given Maximum Bending Stress in Quarter Elliptical Spring

LaTeX Go Length in Spring = (Maximum Bending Stress in Elliptical Spring*Number of Plates*Width of Cross Section*Thickness of Section^2)/(6*Spring Load)

Load given Maximum Bending Stress in Quarter Elliptical Spring

LaTeX Go Spring Load = (Maximum Bending Stress in Elliptical Spring*Number of Plates*Width of Cross Section*Thickness of Section^2)/(6*Length in Spring)

Maximum Bending Stress in Quarter Elliptical Spring

LaTeX Go Maximum Bending Stress in Elliptical Spring = (6*Spring Load*Length in Spring)/(Number of Plates*Width of Cross Section*Thickness of Section^2)

Thickness given Maximum Bending Stress in Quarter Elliptical Spring Formula

LaTeX Go

Thickness of Section = sqrt((6*Spring Load*Length in Spring)/(Number of Plates*Width of Cross Section*Maximum Bending Stress in Elliptical Spring))
t = sqrt((6*W_load*L)/(n*b*f_{elliptical spring}))

What is Quarter Elliptical Spring?

This is an older type of spring with a similar structure to that of a normal leaf spring, only different being that it is half.

How to Calculate Thickness given Maximum Bending Stress in Quarter Elliptical Spring?

Thickness given Maximum Bending Stress in Quarter Elliptical Spring calculator uses Thickness of Section = sqrt((6*Spring Load*Length in Spring)/(Number of Plates*Width of Cross Section*Maximum Bending Stress in Elliptical Spring)) to calculate the Thickness of Section, The Thickness given Maximum Bending Stress in Quarter Elliptical Spring formula is defined as the thickness of the cross-section of one plate of the spring assembly. Thickness of Section is denoted by t symbol.

How to calculate Thickness given Maximum Bending Stress in Quarter Elliptical Spring using this online calculator? To use this online calculator for Thickness given Maximum Bending Stress in Quarter Elliptical Spring, enter Spring Load (W_load), Length in Spring (L), Number of Plates (n), Width of Cross Section (b) & Maximum Bending Stress in Elliptical Spring (f_{elliptical spring}) and hit the calculate button. Here is how the Thickness given Maximum Bending Stress in Quarter Elliptical Spring calculation can be explained with given input values -> 462171.9 = sqrt((6*85*4.17)/(8*0.3*4187.736)).

FAQ

What is Thickness given Maximum Bending Stress in Quarter Elliptical Spring?

The Thickness given Maximum Bending Stress in Quarter Elliptical Spring formula is defined as the thickness of the cross-section of one plate of the spring assembly and is represented as t = sqrt((6*W_load*L)/(n*b*f_{elliptical spring})) or Thickness of Section = sqrt((6*Spring Load*Length in Spring)/(Number of Plates*Width of Cross Section*Maximum Bending Stress in Elliptical Spring)). Spring Load is the instantaneous load applied perpendicular to the specimen cross section, Length in Spring is the measurement or extent of something from end to end, Number of Plates is the count of plates in the leaf spring, Width of Cross Section is the geometric measurement or extent of the member from side to side & Maximum Bending Stress in Elliptical Spring is the maximum normal stress that is induced at a point in a body subjected to loads that cause it to bend.

How to calculate Thickness given Maximum Bending Stress in Quarter Elliptical Spring?

The Thickness given Maximum Bending Stress in Quarter Elliptical Spring formula is defined as the thickness of the cross-section of one plate of the spring assembly is calculated using Thickness of Section = sqrt((6*Spring Load*Length in Spring)/(Number of Plates*Width of Cross Section*Maximum Bending Stress in Elliptical Spring)). To calculate Thickness given Maximum Bending Stress in Quarter Elliptical Spring, you need Spring Load (W_load), Length in Spring (L), Number of Plates (n), Width of Cross Section (b) & Maximum Bending Stress in Elliptical Spring (f_{elliptical spring}). With our tool, you need to enter the respective value for Spring Load, Length in Spring, Number of Plates, Width of Cross Section & Maximum Bending Stress in Elliptical Spring and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search