Thickness of Spigot Collar when Rod Diameter is Available Calculator

✖Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.ⓘ Diameter of Rod of Cotter Joint [d]

+10%

-10%

✖Thickness of spigot collar is defined as thickness of collar of spigot of a cotter joint.ⓘ Thickness of Spigot Collar when Rod Diameter is Available [t₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Joint Geometry and Dimensions Formulas PDF PDF Image

Thickness of Spigot Collar when Rod Diameter is Available Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Spigot Collar = 0.45*Diameter of Rod of Cotter Joint
t₁ = 0.45*d
This formula uses 2 Variables

Variables Used

Thickness of Spigot Collar - (Measured in Meter) - Thickness of spigot collar is defined as thickness of collar of spigot of a cotter joint.
Diameter of Rod of Cotter Joint - (Measured in Meter) - Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.

STEP 1: Convert Input(s) to Base Unit

Diameter of Rod of Cotter Joint: 35.6827 Millimeter --> 0.0356827 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t₁ = 0.45*d --> 0.45*0.0356827

Evaluating ... ...

t₁ = 0.016057215

STEP 3: Convert Result to Output's Unit

0.016057215 Meter -->16.057215 Millimeter (Check conversion here)

FINAL ANSWER

16.057215 ≈ 16.05722 Millimeter <-- Thickness of Spigot Collar

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Cotter Joint » Mechanical » Joint Geometry and Dimensions » Thickness of Spigot Collar when Rod Diameter is Available

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ankush shivhare

Motilal Nehru National Institute of Technology Allahabad (MNNIT), Prayagraj UP

Ankush shivhare has verified this Calculator and 5 more calculators!

< Joint Geometry and Dimensions Calculators

Diameter of Spigot of Cotter Joint given Compressive Stress

LaTeX Go Diameter of Spigot = Diameter of Socket Collar-(Load on Cotter Joint)/(Thickness of Cotter*Compressive Stress in Spigot)

Diameter of Spigot of Cotter Joint given Shear Stress in Spigot

LaTeX Go Diameter of Spigot = (Load on Cotter Joint)/(2*Gap between End of Slot to End of Spigot*Shear Stress in Spigot)

Minimum Diameter of Spigot in Cotter Joint Subjected to Crushing Stress

LaTeX Go Diameter of Spigot = Load on Cotter Joint/(Crushing Stress induced in Cotter*Thickness of Cotter)

Diameter of Spigot Collar given Rod Diameter

LaTeX Go Diameter of Spigot Collar = 1.5*Diameter of Rod of Cotter Joint

Thickness of Spigot Collar when Rod Diameter is Available Formula

LaTeX Go

Thickness of Spigot Collar = 0.45*Diameter of Rod of Cotter Joint
t₁ = 0.45*d

What is a cotter joint?

A cotter joint, also known as a socket and spigot joint, is a method of temporarily joining two coaxial rods. One rod is fitted with a spigot, which fits inside a socket on one end of the other rod. Slots in the socket and the spigot align so that a cotter can be inserted to lock the two rods together.

How to Calculate Thickness of Spigot Collar when Rod Diameter is Available?

Thickness of Spigot Collar when Rod Diameter is Available calculator uses Thickness of Spigot Collar = 0.45*Diameter of Rod of Cotter Joint to calculate the Thickness of Spigot Collar, Thickness of spigot collar when rod diameter is available formula is defined as thickness of spigot collar of a cotter joint. Thickness of Spigot Collar is denoted by t₁ symbol.

How to calculate Thickness of Spigot Collar when Rod Diameter is Available using this online calculator? To use this online calculator for Thickness of Spigot Collar when Rod Diameter is Available, enter Diameter of Rod of Cotter Joint (d) and hit the calculate button. Here is how the Thickness of Spigot Collar when Rod Diameter is Available calculation can be explained with given input values -> 13950 = 0.45*0.0356827.

FAQ

What is Thickness of Spigot Collar when Rod Diameter is Available?

Thickness of spigot collar when rod diameter is available formula is defined as thickness of spigot collar of a cotter joint and is represented as t₁ = 0.45*d or Thickness of Spigot Collar = 0.45*Diameter of Rod of Cotter Joint. Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.

How to calculate Thickness of Spigot Collar when Rod Diameter is Available?

Thickness of spigot collar when rod diameter is available formula is defined as thickness of spigot collar of a cotter joint is calculated using Thickness of Spigot Collar = 0.45*Diameter of Rod of Cotter Joint. To calculate Thickness of Spigot Collar when Rod Diameter is Available, you need Diameter of Rod of Cotter Joint (d). With our tool, you need to enter the respective value for Diameter of Rod of Cotter Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search