Thickness of Piston Head Considering Heat Dissipation Calculator

✖Heat conducted through piston head is the amount of heat conducted from the head of the piston.ⓘ Heat Conducted through Piston Head [H]			+10% -10%
✖Thermal conductivity of piston is the rate at which heat passes through the piston, the amount of heat flow per unit time through unit area with temperature gradient of one degree per unit distance.ⓘ Thermal conductivity of piston [k]			+10% -10%
✖Temperature difference between center and edge of piston is the gradient between the central part and outer surface of piston.ⓘ Temperature difference between Center and Edge [dT]			+10% -10%

✖Thickness of Piston Head is the thickness of the material used at the head of a piston.ⓘ Thickness of Piston Head Considering Heat Dissipation [t_h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Piston Formula PDF PDF Image

Thickness of Piston Head Considering Heat Dissipation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Piston Head = Heat Conducted through Piston Head/(12.56*Thermal conductivity of piston*Temperature difference between Center and Edge)
t_h = H/(12.56*k*dT)
This formula uses 4 Variables

Variables Used

Thickness of Piston Head - (Measured in Meter) - Thickness of Piston Head is the thickness of the material used at the head of a piston.
Heat Conducted through Piston Head - (Measured in Watt) - Heat conducted through piston head is the amount of heat conducted from the head of the piston.
Thermal conductivity of piston - (Measured in Watt per Meter per K) - Thermal conductivity of piston is the rate at which heat passes through the piston, the amount of heat flow per unit time through unit area with temperature gradient of one degree per unit distance.
Temperature difference between Center and Edge - (Measured in Celsius) - Temperature difference between center and edge of piston is the gradient between the central part and outer surface of piston.

STEP 1: Convert Input(s) to Base Unit

Heat Conducted through Piston Head: 3.55 Kilowatt --> 3550 Watt (Check conversion here)
Thermal conductivity of piston: 46.6 Watt per Meter per K --> 46.6 Watt per Meter per K No Conversion Required
Temperature difference between Center and Edge: 220 Celsius --> 220 Celsius No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_h = H/(12.56*k*dT) --> 3550/(12.56*46.6*220)

Evaluating ... ...

t_h = 0.0275695778484111

STEP 3: Convert Result to Output's Unit

0.0275695778484111 Meter -->27.5695778484111 Millimeter (Check conversion here)

FINAL ANSWER

27.5695778484111 ≈ 27.56958 Millimeter <-- Thickness of Piston Head

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » IC Engine » Design of IC Engine Components » Piston » Mechanical » Thickness of Piston Head » Thickness of Piston Head Considering Heat Dissipation

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Thickness of Piston Head Calculators

Thickness of Piston Head According to Grashoff's Formula

LaTeX Go Thickness of Piston Head = Diameter of Cylinder Bore*sqrt(3*Maximum Gas Pressure Inside Cylinder/(16*Bending Stress in Piston Head))

Thickness of Piston Head Considering Heat Dissipation

LaTeX Go Thickness of Piston Head = Heat Conducted through Piston Head/(12.56*Thermal conductivity of piston*Temperature difference between Center and Edge)

Permissible Bending Stress for Piston

LaTeX Go Bending Stress in Piston Head = Ultimate Tensile Strength of Piston/Factor of Safety of Engine Piston

Thickness of Piston Head given Cylinder Inner Diameter

LaTeX Go Thickness of Piston Head = 0.032*Diameter of Cylinder Bore+1.5

Thickness of Piston Head Considering Heat Dissipation Formula

LaTeX Go

Thickness of Piston Head = Heat Conducted through Piston Head/(12.56*Thermal conductivity of piston*Temperature difference between Center and Edge)
t_h = H/(12.56*k*dT)

Compression Ring

A compression ring is the piston ring located in the ring groove closest to the piston head. The compression ring seals the combustion chamber from any leakage during the combustion process. When the air-fuel mixture is ignited, pressure from combustion gases is applied to the piston head, forcing the piston toward the crankshaft. The pressurized gases travel through the gap between the cylinder wall and the piston and into the piston ring groove. Combustion gas pressure forces the piston ring against the cylinder wall to form a seal. The pressure applied to the piston ring is approximately proportional to the combustion gas pressure.

How to Calculate Thickness of Piston Head Considering Heat Dissipation?

Thickness of Piston Head Considering Heat Dissipation calculator uses Thickness of Piston Head = Heat Conducted through Piston Head/(12.56*Thermal conductivity of piston*Temperature difference between Center and Edge) to calculate the Thickness of Piston Head, Thickness of piston head considering heat dissipation is the thickness of the head of the piston considering only the heat conducted or dissipated from the piston. Thickness of Piston Head is denoted by t_h symbol.

How to calculate Thickness of Piston Head Considering Heat Dissipation using this online calculator? To use this online calculator for Thickness of Piston Head Considering Heat Dissipation, enter Heat Conducted through Piston Head (H), Thermal conductivity of piston (k) & Temperature difference between Center and Edge (dT) and hit the calculate button. Here is how the Thickness of Piston Head Considering Heat Dissipation calculation can be explained with given input values -> 27569.58 = 3550/(12.56*46.6*493.15).

FAQ

What is Thickness of Piston Head Considering Heat Dissipation?

Thickness of piston head considering heat dissipation is the thickness of the head of the piston considering only the heat conducted or dissipated from the piston and is represented as t_h = H/(12.56*k*dT) or Thickness of Piston Head = Heat Conducted through Piston Head/(12.56*Thermal conductivity of piston*Temperature difference between Center and Edge). Heat conducted through piston head is the amount of heat conducted from the head of the piston, Thermal conductivity of piston is the rate at which heat passes through the piston, the amount of heat flow per unit time through unit area with temperature gradient of one degree per unit distance & Temperature difference between center and edge of piston is the gradient between the central part and outer surface of piston.

How to calculate Thickness of Piston Head Considering Heat Dissipation?

Thickness of piston head considering heat dissipation is the thickness of the head of the piston considering only the heat conducted or dissipated from the piston is calculated using Thickness of Piston Head = Heat Conducted through Piston Head/(12.56*Thermal conductivity of piston*Temperature difference between Center and Edge). To calculate Thickness of Piston Head Considering Heat Dissipation, you need Heat Conducted through Piston Head (H), Thermal conductivity of piston (k) & Temperature difference between Center and Edge (dT). With our tool, you need to enter the respective value for Heat Conducted through Piston Head, Thermal conductivity of piston & Temperature difference between Center and Edge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Piston Head?

In this formula, Thickness of Piston Head uses Heat Conducted through Piston Head, Thermal conductivity of piston & Temperature difference between Center and Edge. We can use 2 other way(s) to calculate the same, which is/are as follows -

Thickness of Piston Head = Diameter of Cylinder Bore*sqrt(3*Maximum Gas Pressure Inside Cylinder/(16*Bending Stress in Piston Head))
Thickness of Piston Head = 0.032*Diameter of Cylinder Bore+1.5

Home

FREE PDFs

🔍 Search