Thickness of Pipe using Hoop Stress and Head of Liquid Calculator

✖Unit Weight of Water in KN per Cubic Meter is the weight of water per unit volume of water.ⓘ Unit Weight of Water in KN per Cubic Meter [γ_water]			+10% -10%
✖Head of Liquid in Pipe is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column from the base of its container.ⓘ Head of Liquid in Pipe [H_liquid]			+10% -10%
✖Pipe Radius is the distance between the center of a pipe segment to the edge of the pipe segment.ⓘ Pipe Radius [R_pipe]			+10% -10%
✖Hoop Tension in Pipe Shell in KN/Square Meter is the stress that occurs along the pipe's circumference when pressure is applied in KN/Square Meter.ⓘ Hoop Tension in Pipe Shell in KN/Square Meter [f_KN]			+10% -10%

✖Curb Height is defined as the vertical length of the curb or edge which the wheel must climb.ⓘ Thickness of Pipe using Hoop Stress and Head of Liquid [h_curb]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Internal Water Pressure Formulas PDF PDF Image

Thickness of Pipe using Hoop Stress and Head of Liquid Solution

STEP 0: Pre-Calculation Summary

Formula Used

Curb Height = (Unit Weight of Water in KN per Cubic Meter*Head of Liquid in Pipe*Pipe Radius)/Hoop Tension in Pipe Shell in KN/Square Meter
h_curb = (γ_water*H_liquid*R_pipe)/f_KN
This formula uses 5 Variables

Variables Used

Curb Height - (Measured in Meter) - Curb Height is defined as the vertical length of the curb or edge which the wheel must climb.
Unit Weight of Water in KN per Cubic Meter - (Measured in Newton per Cubic Meter) - Unit Weight of Water in KN per Cubic Meter is the weight of water per unit volume of water.
Head of Liquid in Pipe - (Measured in Meter) - Head of Liquid in Pipe is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column from the base of its container.
Pipe Radius - (Measured in Meter) - Pipe Radius is the distance between the center of a pipe segment to the edge of the pipe segment.
Hoop Tension in Pipe Shell in KN/Square Meter - (Measured in Pascal) - Hoop Tension in Pipe Shell in KN/Square Meter is the stress that occurs along the pipe's circumference when pressure is applied in KN/Square Meter.

STEP 1: Convert Input(s) to Base Unit

Unit Weight of Water in KN per Cubic Meter: 9.81 Kilonewton per Cubic Meter --> 9810 Newton per Cubic Meter (Check conversion here)
Head of Liquid in Pipe: 0.46 Meter --> 0.46 Meter No Conversion Required
Pipe Radius: 1.04 Meter --> 1.04 Meter No Conversion Required
Hoop Tension in Pipe Shell in KN/Square Meter: 23.48 Kilonewton per Square Meter --> 23480 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_curb = (γ_water*H_liquid*R_pipe)/f_KN --> (9810*0.46*1.04)/23480

Evaluating ... ...

h_curb = 0.199876660988075

STEP 3: Convert Result to Output's Unit

0.199876660988075 Meter --> No Conversion Required

FINAL ANSWER

0.199876660988075 ≈ 0.199877 Meter <-- Curb Height

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Conveyance of Water » Stresses in Pipes » Internal Water Pressure » Thickness of Pipe using Hoop Stress and Head of Liquid

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Internal Water Pressure Calculators

Hoop Tension in Pipe Shell using Head of Liquid

LaTeX Go Hoop Tension in Pipe Shell in KN/Square Meter = ((Unit Weight of Water in KN per Cubic Meter*Head of Liquid in Pipe*Pipe Radius)/Curb Height)

Water Pressure given Hoop Tension in Pipe Shell

LaTeX Go Water Pressure in KN per Square Meter = (Hoop Tension in Pipe Shell in KN/Square Meter*Curb Height)/Pipe Radius

Hoop Tension in Pipe Shell

LaTeX Go Hoop Tension in Pipe Shell in KN/Square Meter = (Water Pressure in KN per Square Meter*Pipe Radius)/Curb Height

Water Pressure given Unit Weight of Water

LaTeX Go Water Pressure in KN per Square Meter = (Unit Weight of Water in KN per Cubic Meter*Head of Liquid in Pipe)

Thickness of Pipe using Hoop Stress and Head of Liquid Formula

LaTeX Go

Curb Height = (Unit Weight of Water in KN per Cubic Meter*Head of Liquid in Pipe*Pipe Radius)/Hoop Tension in Pipe Shell in KN/Square Meter
h_curb = (γ_water*H_liquid*R_pipe)/f_KN

What is Unit Weight of Water?

The specific weight, also known as the unit weight, is the weight per unit volume of a material. A commonly used value is the specific weight of water on Earth at 4°C, which is 9810 N/m3 or 9.807 kN/m3 or 62.43 lbf/ft3.

How to Calculate Thickness of Pipe using Hoop Stress and Head of Liquid?

Thickness of Pipe using Hoop Stress and Head of Liquid calculator uses Curb Height = (Unit Weight of Water in KN per Cubic Meter*Head of Liquid in Pipe*Pipe Radius)/Hoop Tension in Pipe Shell in KN/Square Meter to calculate the Curb Height, The Thickness of Pipe using Hoop Stress and Head of Liquid formula is defined as the pipe thickness based on the stresses induced by the pressure exerted by a liquid inside the pipe. Curb Height is denoted by h_curb symbol.

How to calculate Thickness of Pipe using Hoop Stress and Head of Liquid using this online calculator? To use this online calculator for Thickness of Pipe using Hoop Stress and Head of Liquid, enter Unit Weight of Water in KN per Cubic Meter (γ_water), Head of Liquid in Pipe (H_liquid), Pipe Radius (R_pipe) & Hoop Tension in Pipe Shell in KN/Square Meter (f_KN) and hit the calculate button. Here is how the Thickness of Pipe using Hoop Stress and Head of Liquid calculation can be explained with given input values -> 0.199877 = (9810*0.46*1.04)/23480.

FAQ

What is Thickness of Pipe using Hoop Stress and Head of Liquid?

The Thickness of Pipe using Hoop Stress and Head of Liquid formula is defined as the pipe thickness based on the stresses induced by the pressure exerted by a liquid inside the pipe and is represented as h_curb = (γ_water*H_liquid*R_pipe)/f_KN or Curb Height = (Unit Weight of Water in KN per Cubic Meter*Head of Liquid in Pipe*Pipe Radius)/Hoop Tension in Pipe Shell in KN/Square Meter. Unit Weight of Water in KN per Cubic Meter is the weight of water per unit volume of water, Head of Liquid in Pipe is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column from the base of its container, Pipe Radius is the distance between the center of a pipe segment to the edge of the pipe segment & Hoop Tension in Pipe Shell in KN/Square Meter is the stress that occurs along the pipe's circumference when pressure is applied in KN/Square Meter.

How to calculate Thickness of Pipe using Hoop Stress and Head of Liquid?

The Thickness of Pipe using Hoop Stress and Head of Liquid formula is defined as the pipe thickness based on the stresses induced by the pressure exerted by a liquid inside the pipe is calculated using Curb Height = (Unit Weight of Water in KN per Cubic Meter*Head of Liquid in Pipe*Pipe Radius)/Hoop Tension in Pipe Shell in KN/Square Meter. To calculate Thickness of Pipe using Hoop Stress and Head of Liquid, you need Unit Weight of Water in KN per Cubic Meter (γ_water), Head of Liquid in Pipe (H_liquid), Pipe Radius (R_pipe) & Hoop Tension in Pipe Shell in KN/Square Meter (f_KN). With our tool, you need to enter the respective value for Unit Weight of Water in KN per Cubic Meter, Head of Liquid in Pipe, Pipe Radius & Hoop Tension in Pipe Shell in KN/Square Meter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Curb Height?

In this formula, Curb Height uses Unit Weight of Water in KN per Cubic Meter, Head of Liquid in Pipe, Pipe Radius & Hoop Tension in Pipe Shell in KN/Square Meter. We can use 1 other way(s) to calculate the same, which is/are as follows -

Curb Height = (Water Pressure in KN per Square Meter*Pipe Radius)/Hoop Tension in Pipe Shell in KN/Square Meter

Home

FREE PDFs

🔍 Search