Thickness of Metal Disc Calculator

✖Disc Material Resistivity is defined as is a measure of the resistance of a given size of a specific material to electrical conduction.ⓘ Disc Material Resistivity [ρ]			+10% -10%
✖Permanent Magnet Depth is defined as the total depth of the magnetic field of a permanent magnet.ⓘ Permanent Magnet Depth [D]			+10% -10%
✖Eddy Current Path Resistance is defined as a measure of the opposition to current flow in an electrical circuit.ⓘ Eddy Current Path Resistance [R_e]			+10% -10%
✖Permanent Magnet Width is defined as the distance or measurement from side to side of the former.ⓘ Permanent Magnet Width [B]			+10% -10%

✖Metal Disc Thickness refers to the distance between its two parallel surfaces. It is a measure of how thick the disc is from one side to the other.ⓘ Thickness of Metal Disc [T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Measuring Instrument Circuits Formula PDF PDF Image

Thickness of Metal Disc Solution

STEP 0: Pre-Calculation Summary

Formula Used

Metal Disc Thickness = Disc Material Resistivity*Permanent Magnet Depth/(Eddy Current Path Resistance*Permanent Magnet Width)
T = ρ*D/(R_e*B)
This formula uses 5 Variables

Variables Used

Metal Disc Thickness - (Measured in Meter) - Metal Disc Thickness refers to the distance between its two parallel surfaces. It is a measure of how thick the disc is from one side to the other.
Disc Material Resistivity - (Measured in Ohm Meter) - Disc Material Resistivity is defined as is a measure of the resistance of a given size of a specific material to electrical conduction.
Permanent Magnet Depth - (Measured in Meter) - Permanent Magnet Depth is defined as the total depth of the magnetic field of a permanent magnet.
Eddy Current Path Resistance - (Measured in Ohm) - Eddy Current Path Resistance is defined as a measure of the opposition to current flow in an electrical circuit.
Permanent Magnet Width - (Measured in Meter) - Permanent Magnet Width is defined as the distance or measurement from side to side of the former.

STEP 1: Convert Input(s) to Base Unit

Disc Material Resistivity: 0.2 Ohm Meter --> 0.2 Ohm Meter No Conversion Required
Permanent Magnet Depth: 0.11 Meter --> 0.11 Meter No Conversion Required
Eddy Current Path Resistance: 0.02 Ohm --> 0.02 Ohm No Conversion Required
Permanent Magnet Width: 4.3 Meter --> 4.3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T = ρ*D/(R_e*B) --> 0.2*0.11/(0.02*4.3)

Evaluating ... ...

T = 0.255813953488372

STEP 3: Convert Result to Output's Unit

0.255813953488372 Meter --> No Conversion Required

FINAL ANSWER

0.255813953488372 ≈ 0.255814 Meter <-- Metal Disc Thickness

(Calculation completed in 00.066 seconds)

You are here -

Home » Engineering » Electronics and Instrumentation » Measuring Instrument Circuits » Ohmmeter » Fundamental Characteristics » Thickness of Metal Disc

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Fundamental Characteristics Calculators

Resistivity of Material Disc

LaTeX Go Disc Material Resistivity = (Eddy Current Path Resistance*Metal Disc Thickness*Permanent Magnet Width)/Permanent Magnet Depth

Resistance of Path of Eddy Current

LaTeX Go Eddy Current Path Resistance = (Disc Material Resistivity*Metallic Former Length)/Metallic Former Area

Resistance of Meter

LaTeX Go Meter Resistance = Full Scale Voltage Reading/Current Full Scale Reading

Volume Resistance of Insulation

LaTeX Go Insulation Volume Resistance = Potential Difference/Meter Current

Thickness of Metal Disc Formula

LaTeX Go

Metal Disc Thickness = Disc Material Resistivity*Permanent Magnet Depth/(Eddy Current Path Resistance*Permanent Magnet Width)
T = ρ*D/(R_e*B)

What is resistivity?

Resistivity is a fundamental property of materials that describes how strongly a material opposes the flow of electric current. It quantifies the material's ability to conduct electricity and is an important parameter in understanding and predicting the behavior of electrical circuits and components.

How to Calculate Thickness of Metal Disc?

Thickness of Metal Disc calculator uses Metal Disc Thickness = Disc Material Resistivity*Permanent Magnet Depth/(Eddy Current Path Resistance*Permanent Magnet Width) to calculate the Metal Disc Thickness, The Thickness of Metal Disc formula is defined as often cutting discs, also known as cut-off wheels, are made from a solid abrasive disc. These discs are often used for cutting metal; they are composed of an abrasive mix of grit and adhesive that is formed into a thin, rigid disc with fiber webbing running through it for strength. Metal Disc Thickness is denoted by T symbol.

How to calculate Thickness of Metal Disc using this online calculator? To use this online calculator for Thickness of Metal Disc, enter Disc Material Resistivity (ρ), Permanent Magnet Depth (D), Eddy Current Path Resistance (R_e) & Permanent Magnet Width (B) and hit the calculate button. Here is how the Thickness of Metal Disc calculation can be explained with given input values -> 0.255814 = 0.2*0.11/(0.02*4.3).

FAQ

What is Thickness of Metal Disc?

The Thickness of Metal Disc formula is defined as often cutting discs, also known as cut-off wheels, are made from a solid abrasive disc. These discs are often used for cutting metal; they are composed of an abrasive mix of grit and adhesive that is formed into a thin, rigid disc with fiber webbing running through it for strength and is represented as T = ρ*D/(R_e*B) or Metal Disc Thickness = Disc Material Resistivity*Permanent Magnet Depth/(Eddy Current Path Resistance*Permanent Magnet Width). Disc Material Resistivity is defined as is a measure of the resistance of a given size of a specific material to electrical conduction, Permanent Magnet Depth is defined as the total depth of the magnetic field of a permanent magnet, Eddy Current Path Resistance is defined as a measure of the opposition to current flow in an electrical circuit & Permanent Magnet Width is defined as the distance or measurement from side to side of the former.

How to calculate Thickness of Metal Disc?

The Thickness of Metal Disc formula is defined as often cutting discs, also known as cut-off wheels, are made from a solid abrasive disc. These discs are often used for cutting metal; they are composed of an abrasive mix of grit and adhesive that is formed into a thin, rigid disc with fiber webbing running through it for strength is calculated using Metal Disc Thickness = Disc Material Resistivity*Permanent Magnet Depth/(Eddy Current Path Resistance*Permanent Magnet Width). To calculate Thickness of Metal Disc, you need Disc Material Resistivity (ρ), Permanent Magnet Depth (D), Eddy Current Path Resistance (R_e) & Permanent Magnet Width (B). With our tool, you need to enter the respective value for Disc Material Resistivity, Permanent Magnet Depth, Eddy Current Path Resistance & Permanent Magnet Width and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search