Thickness of main plate given thickness of cover plate for butt joint with single cover plate Calculator

✖The Thickness of Cover Plate is defined as thickness of cover plates for butt joints.ⓘ Thickness of Cover Plate [h_c]

+10%

-10%

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of main plate given thickness of cover plate for butt joint with single cover plate [t_plate]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Thickness of main plate given thickness of cover plate for butt joint with single cover plate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Plate = Thickness of Cover Plate/1.125
t_plate = h_c/1.125
This formula uses 2 Variables

Variables Used

Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Thickness of Cover Plate - (Measured in Meter) - The Thickness of Cover Plate is defined as thickness of cover plates for butt joints.

STEP 1: Convert Input(s) to Base Unit

Thickness of Cover Plate: 7.5 Millimeter --> 0.0075 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_plate = h_c/1.125 --> 0.0075/1.125

Evaluating ... ...

t_plate = 0.00666666666666667

STEP 3: Convert Result to Output's Unit

0.00666666666666667 Meter -->6.66666666666667 Millimeter (Check conversion here)

FINAL ANSWER

6.66666666666667 ≈ 6.666667 Millimeter <-- Thickness of Plate

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Mechanical » Design of Riveted Joint » Thickness of main plate given thickness of cover plate for butt joint with single cover plate

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Design of Riveted Joint Calculators

Diameter of rivet(for dimension in cm)

LaTeX Go Rivet Diameter = 1.6*sqrt(Thickness of Plate)

Diameter of rivet

LaTeX Go Rivet Diameter = 6*sqrt(Thickness of Plate)

Thickness of main plate(for dimension in cm)

LaTeX Go Thickness of Plate = (Rivet Diameter/1.6)^2

Thickness of main plate(for dimension in mm)

LaTeX Go Thickness of Plate = (Rivet Diameter/6)^2

Thickness of main plate given thickness of cover plate for butt joint with single cover plate Formula

LaTeX Go

Thickness of Plate = Thickness of Cover Plate/1.125
t_plate = h_c/1.125

What is the difference between solid shank rivet and special rivet?

Two of the major types of rivets used in the aircraft are the common solid shank type, which must be driven using a bucking bar, and the special (blind) rivets, which may be installed where it is impossible to use a bucking bar. Solid shank rivets are generally used in repair work.

How to Calculate Thickness of main plate given thickness of cover plate for butt joint with single cover plate?

Thickness of main plate given thickness of cover plate for butt joint with single cover plate calculator uses Thickness of Plate = Thickness of Cover Plate/1.125 to calculate the Thickness of Plate, The Thickness of main plate given thickness of cover plate for butt joint with single cover plate formula is defined as the distance through an object, as distinct from width or height. Thickness of Plate is denoted by t_plate symbol.

How to calculate Thickness of main plate given thickness of cover plate for butt joint with single cover plate using this online calculator? To use this online calculator for Thickness of main plate given thickness of cover plate for butt joint with single cover plate, enter Thickness of Cover Plate (h_c) and hit the calculate button. Here is how the Thickness of main plate given thickness of cover plate for butt joint with single cover plate calculation can be explained with given input values -> 12444.44 = 0.0075/1.125.

FAQ

What is Thickness of main plate given thickness of cover plate for butt joint with single cover plate?

The Thickness of main plate given thickness of cover plate for butt joint with single cover plate formula is defined as the distance through an object, as distinct from width or height and is represented as t_plate = h_c/1.125 or Thickness of Plate = Thickness of Cover Plate/1.125. The Thickness of Cover Plate is defined as thickness of cover plates for butt joints.

How to calculate Thickness of main plate given thickness of cover plate for butt joint with single cover plate?

The Thickness of main plate given thickness of cover plate for butt joint with single cover plate formula is defined as the distance through an object, as distinct from width or height is calculated using Thickness of Plate = Thickness of Cover Plate/1.125. To calculate Thickness of main plate given thickness of cover plate for butt joint with single cover plate, you need Thickness of Cover Plate (h_c). With our tool, you need to enter the respective value for Thickness of Cover Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Plate?

In this formula, Thickness of Plate uses Thickness of Cover Plate. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickness of Plate = (Rivet Diameter/1.6)^2
Thickness of Plate = (Rivet Diameter/6)^2
Thickness of Plate = Thickness of Cover Plate/0.625

Home

FREE PDFs

🔍 Search