Thickness of main plate(for dimension in mm) Calculator

✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]

+10%

-10%

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of main plate(for dimension in mm) [t_plate]

⎘ Copy

👎

Formula

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Thickness of main plate(for dimension in mm) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Plate = (Rivet Diameter/6)^2
t_plate = (D_rivet/6)^2
This formula uses 2 Variables

Variables Used

Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

STEP 1: Convert Input(s) to Base Unit

Rivet Diameter: 657.2671 Millimeter --> 0.6572671 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_plate = (D_rivet/6)^2 --> (0.6572671/6)^2

Evaluating ... ...

t_plate = 0.0120000011317336

STEP 3: Convert Result to Output's Unit

0.0120000011317336 Meter -->12.0000011317336 Millimeter (Check conversion here)

FINAL ANSWER

12.0000011317336 ≈ 12 Millimeter <-- Thickness of Plate

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Mechanical » Design of Riveted Joint » Thickness of main plate(for dimension in mm)

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Design of Riveted Joint Calculators

Diameter of rivet(for dimension in cm)

Go Rivet Diameter = 1.6*sqrt(Thickness of Plate)

Diameter of rivet

Go Rivet Diameter = 6*sqrt(Thickness of Plate)

Thickness of main plate(for dimension in cm)

Go Thickness of Plate = (Rivet Diameter/1.6)^2

Thickness of main plate(for dimension in mm)

Go Thickness of Plate = (Rivet Diameter/6)^2

Thickness of main plate(for dimension in mm) Formula

Thickness of Plate = (Rivet Diameter/6)^2
t_plate = (D_rivet/6)^2

What is the difference between solid shank rivet and special rivet?

Two of the major types of rivets used in the aircraft are the common solid shank type, which must be driven using a bucking bar, and the special (blind) rivets, which may be installed where it is impossible to use a bucking bar. Solid shank rivets are generally used in repair work.

How to Calculate Thickness of main plate(for dimension in mm)?

Thickness of main plate(for dimension in mm) calculator uses Thickness of Plate = (Rivet Diameter/6)^2 to calculate the Thickness of Plate, The Thickness of main plate(for dimension in mm) formula is defined as the distance through an object, as distinct from width or height. Thickness of Plate is denoted by t_plate symbol.

How to calculate Thickness of main plate(for dimension in mm) using this online calculator? To use this online calculator for Thickness of main plate(for dimension in mm), enter Rivet Diameter (D_rivet) and hit the calculate button. Here is how the Thickness of main plate(for dimension in mm) calculation can be explained with given input values -> 9 = (0.6572671/6)^2.

FAQ

What is Thickness of main plate(for dimension in mm)?

The Thickness of main plate(for dimension in mm) formula is defined as the distance through an object, as distinct from width or height and is represented as t_plate = (D_rivet/6)^2 or Thickness of Plate = (Rivet Diameter/6)^2. Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

How to calculate Thickness of main plate(for dimension in mm)?

The Thickness of main plate(for dimension in mm) formula is defined as the distance through an object, as distinct from width or height is calculated using Thickness of Plate = (Rivet Diameter/6)^2. To calculate Thickness of main plate(for dimension in mm), you need Rivet Diameter (D_rivet). With our tool, you need to enter the respective value for Rivet Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Plate?

In this formula, Thickness of Plate uses Rivet Diameter. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickness of Plate = (Rivet Diameter/1.6)^2
Thickness of Plate = Thickness of Cover Plate/1.125
Thickness of Plate = Thickness of Cover Plate/0.625

Home

FREE PDFs

🔍 Search