Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
a = L/(2*σtf*(do-d))
This formula uses 5 Variables
Variables Used
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Tensile Stress in Fork of Knuckle Joint - (Measured in Pascal) - Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
STEP 1: Convert Input(s) to Base Unit
Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Tensile Stress in Fork of Knuckle Joint: 26.5 Newton per Square Millimeter --> 26500000 Pascal (Check conversion ​here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion ​here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = L/(2*σtf*(do-d)) --> 45000/(2*26500000*(0.08-0.037))
Evaluating ... ...
a = 0.0197455024133392
STEP 3: Convert Result to Output's Unit
0.0197455024133392 Meter -->19.7455024133392 Millimeter (Check conversion ​here)
FINAL ANSWER
19.7455024133392 19.7455 Millimeter <-- Thickess of Fork Eye of Knuckle Joint
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verifier Image
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

Fork Calculators

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork
​ LaTeX ​ Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye
​ LaTeX ​ Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye
​ LaTeX ​ Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
Outer Diameter of Eye of Knuckle Joint given Diameter of Pin
​ LaTeX ​ Go Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin

Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork Formula

​LaTeX ​Go
Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
a = L/(2*σtf*(do-d))

Shear failure in beams

Shear failure occurs when the beam has shear resistance lower than flexural strength and the shear force exceeds the shear capacity of different materials of the beam. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force.
This type of failure is sudden and provides no warning i.e. brittle failure. The effective span to depth ratio of the beams and their size are important parameters in determining the type of shear failure. Shear failure is an undesired type of failure and commonly stirrups are placed in the beam to prevent the shear failure.

How to Calculate Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork?

Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork calculator uses Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Thickess of Fork Eye of Knuckle Joint, The Thickness of fork eye of knuckle joint given tensile stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis. Thickess of Fork Eye of Knuckle Joint is denoted by a symbol.

How to calculate Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork using this online calculator? To use this online calculator for Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork, enter Load on Knuckle Joint (L), Tensile Stress in Fork of Knuckle Joint tf), Outer Diameter of Eye of Knuckle Joint (do) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork calculation can be explained with given input values -> 21939.45 = 45000/(2*26500000*(0.08-0.037)).

FAQ

What is Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork?
The Thickness of fork eye of knuckle joint given tensile stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis and is represented as a = L/(2*σtf*(do-d)) or Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
How to calculate Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork?
The Thickness of fork eye of knuckle joint given tensile stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). To calculate Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork, you need Load on Knuckle Joint (L), Tensile Stress in Fork of Knuckle Joint tf), Outer Diameter of Eye of Knuckle Joint (do) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Tensile Stress in Fork of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickess of Fork Eye of Knuckle Joint?
In this formula, Thickess of Fork Eye of Knuckle Joint uses Load on Knuckle Joint, Tensile Stress in Fork of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)
  • Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)
  • Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!