Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Compressive Stress in Knuckle Pin is the compressive stress induced into the pin of a knuckle joint, the force per unit area tending to cause deformation of the pin.ⓘ Compressive Stress in Knuckle Pin [σ_c]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End [a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Knuckle Joint Formulas PDF PDF Image

Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)
a = L/(2*σ_c*d)
This formula uses 4 Variables

Variables Used

Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Compressive Stress in Knuckle Pin - (Measured in Pascal) - Compressive Stress in Knuckle Pin is the compressive stress induced into the pin of a knuckle joint, the force per unit area tending to cause deformation of the pin.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Compressive Stress in Knuckle Pin: 30 Newton per Square Millimeter --> 30000000 Pascal (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

a = L/(2*σ_c*d) --> 45000/(2*30000000*0.037)

Evaluating ... ...

a = 0.0202702702702703

STEP 3: Convert Result to Output's Unit

0.0202702702702703 Meter -->20.2702702702703 Millimeter (Check conversion here)

FINAL ANSWER

20.2702702702703 ≈ 20.27027 Millimeter <-- Thickess of Fork Eye of Knuckle Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Fork » Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Fork Calculators

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork

LaTeX Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye

LaTeX Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye

LaTeX Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)

Outer Diameter of Eye of Knuckle Joint given Diameter of Pin

LaTeX Go Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin

Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End Formula

LaTeX Go

Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)
a = L/(2*σ_c*d)

Applications of knuckle joint

1. Tie rod joint of a roof truss.
2. Tension link in bridge structure.
3. Link of roller chain.
4. Tie rod joint of jib crane.
5. The knuckle joint is also used in tractor.

How to Calculate Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End?

Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End calculator uses Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin) to calculate the Thickess of Fork Eye of Knuckle Joint, Thickness of fork eye of knuckle joint given compressive stress in pin inside fork end is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis. Thickess of Fork Eye of Knuckle Joint is denoted by a symbol.

How to calculate Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End using this online calculator? To use this online calculator for Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End, enter Load on Knuckle Joint (L), Compressive Stress in Knuckle Pin (σ_c) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End calculation can be explained with given input values -> 22522.52 = 45000/(2*30000000*0.037).

FAQ

What is Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End?

Thickness of fork eye of knuckle joint given compressive stress in pin inside fork end is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis and is represented as a = L/(2*σ_c*d) or Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Compressive Stress in Knuckle Pin is the compressive stress induced into the pin of a knuckle joint, the force per unit area tending to cause deformation of the pin & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End?

Thickness of fork eye of knuckle joint given compressive stress in pin inside fork end is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin). To calculate Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End, you need Load on Knuckle Joint (L), Compressive Stress in Knuckle Pin (σ_c) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Compressive Stress in Knuckle Pin & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickess of Fork Eye of Knuckle Joint?

In this formula, Thickess of Fork Eye of Knuckle Joint uses Load on Knuckle Joint, Compressive Stress in Knuckle Pin & Diameter of Knuckle Pin. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)
Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)
Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Home

FREE PDFs

🔍 Search