Thickness of Plate given Area of Unsymmetrical Weld Calculator

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%
✖Length of top weld is the linear distance of each weld segment.ⓘ Length of Top Weld [L_{top weld}]			+10% -10%
✖Length of bottom weld is the linear distance of each weld segment.ⓘ Length of Bottom Weld [L₂]			+10% -10%

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate given Area of Unsymmetrical Weld [t_plate]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Thickness of Plate given Area of Unsymmetrical Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Plate = Weld Bed Area/((Length of Top Weld+Length of Bottom Weld)*0.707)
t_plate = A_{weld bed}/((L_{top weld}+L₂)*0.707)
This formula uses 4 Variables

Variables Used

Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Length of Top Weld - (Measured in Meter) - Length of top weld is the linear distance of each weld segment.
Length of Bottom Weld - (Measured in Meter) - Length of bottom weld is the linear distance of each weld segment.

STEP 1: Convert Input(s) to Base Unit

Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Length of Top Weld: 4 Millimeter --> 0.004 Meter (Check conversion here)
Length of Bottom Weld: 6 Millimeter --> 0.006 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_plate = A_{weld bed}/((L_{top weld}+L₂)*0.707) --> 0.0009/((0.004+0.006)*0.707)

Evaluating ... ...

t_plate = 0.127298444130127

STEP 3: Convert Result to Output's Unit

0.127298444130127 Meter -->127.298444130127 Millimeter (Check conversion here)

FINAL ANSWER

127.298444130127 ≈ 127.2984 Millimeter <-- Thickness of Plate

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Analysis of Unsymmetrical Welded Sections which are Loaded Axially » Mechanical » Weld Parameters » Thickness of Plate given Area of Unsymmetrical Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Weld Parameters Calculators

Total Length of Weld given Length of Top Weld

LaTeX Go Total length of weld = (Length of Top Weld*(Distance of top weld from gravity axis+Distance of Bottom Weld from Gravity Axis))/Distance of Bottom Weld from Gravity Axis

Axial Load on Angle

LaTeX Go Axial load on angle = Resistance of weld per unit length*(Length of Top Weld+Length of Bottom Weld)

Axial Load on Angle given Resistance of Bottom and Top Weld

LaTeX Go Axial load on angle = Resistance of top weld+Resistance of bottom weld

Total Length of Weld given Length of Top and Bottom Weld

LaTeX Go Total length of weld = Length of Top Weld+Length of Bottom Weld

Thickness of Plate given Area of Unsymmetrical Weld Formula

LaTeX Go

Thickness of Plate = Weld Bed Area/((Length of Top Weld+Length of Bottom Weld)*0.707)
t_plate = A_{weld bed}/((L_{top weld}+L₂)*0.707)

What is axial load and radial load?

Radial Load is defined as the maximum force that can be applied to the shaft in the radial direction (any direction perpendicular to the motor shaft axis). Axial Load is defined as the maximum force that can be applied to the shaft in the axial direction (in the same axis as or parallel to the motor shaft axis).

How to Calculate Thickness of Plate given Area of Unsymmetrical Weld?

Thickness of Plate given Area of Unsymmetrical Weld calculator uses Thickness of Plate = Weld Bed Area/((Length of Top Weld+Length of Bottom Weld)*0.707) to calculate the Thickness of Plate, The Thickness of plate given area of unsymmetrical weld formula is defined as the distance through an object, as distinct from width or height. Thickness of Plate is denoted by t_plate symbol.

How to calculate Thickness of Plate given Area of Unsymmetrical Weld using this online calculator? To use this online calculator for Thickness of Plate given Area of Unsymmetrical Weld, enter Weld Bed Area (A_{weld bed}), Length of Top Weld (L_{top weld}) & Length of Bottom Weld (L₂) and hit the calculate button. Here is how the Thickness of Plate given Area of Unsymmetrical Weld calculation can be explained with given input values -> 127298.4 = 0.0009/((0.004+0.006)*0.707).

FAQ

What is Thickness of Plate given Area of Unsymmetrical Weld?

The Thickness of plate given area of unsymmetrical weld formula is defined as the distance through an object, as distinct from width or height and is represented as t_plate = A_{weld bed}/((L_{top weld}+L₂)*0.707) or Thickness of Plate = Weld Bed Area/((Length of Top Weld+Length of Bottom Weld)*0.707). Weld Bed Area is that area which is prepared by joining two metals for welding, Length of top weld is the linear distance of each weld segment & Length of bottom weld is the linear distance of each weld segment.

How to calculate Thickness of Plate given Area of Unsymmetrical Weld?

The Thickness of plate given area of unsymmetrical weld formula is defined as the distance through an object, as distinct from width or height is calculated using Thickness of Plate = Weld Bed Area/((Length of Top Weld+Length of Bottom Weld)*0.707). To calculate Thickness of Plate given Area of Unsymmetrical Weld, you need Weld Bed Area (A_{weld bed}), Length of Top Weld (L_{top weld}) & Length of Bottom Weld (L₂). With our tool, you need to enter the respective value for Weld Bed Area, Length of Top Weld & Length of Bottom Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Plate?

In this formula, Thickness of Plate uses Weld Bed Area, Length of Top Weld & Length of Bottom Weld. We can use 1 other way(s) to calculate the same, which is/are as follows -

Thickness of Plate = Axial Load on Weld/(Shear Stress*(Length of Top Weld+Length of Bottom Weld)*0.707)

Home

FREE PDFs

🔍 Search