Thrust factor of Bearing given Race Rotation Factor Calculator

✖Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing.ⓘ Equivalent Dynamic Load on Bearing [P_eq]			+10% -10%
✖Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.ⓘ Radial Factor [X]			+10% -10%
✖Race-rotation factor is a factor accounting for the rotation of the races of a bearing.ⓘ Race-Rotation Factor [V]			+10% -10%
✖Radial load acting on bearing is the amount of load onto the bearing acting radially.ⓘ Radial Load Acting on Bearing [F_r]			+10% -10%
✖Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.ⓘ Axial or Thrust Load Acting on Bearing [F_a]			+10% -10%

✖Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.ⓘ Thrust factor of Bearing given Race Rotation Factor [Y]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Rolling Contact Bearing Formulas PDF PDF Image

Thrust factor of Bearing given Race Rotation Factor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing
Y = (P_eq-(X*V*F_r))/F_a
This formula uses 6 Variables

Variables Used

Thrust Factor for Bearing - Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.
Equivalent Dynamic Load on Bearing - (Measured in Newton) - Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing.
Radial Factor - Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.
Race-Rotation Factor - Race-rotation factor is a factor accounting for the rotation of the races of a bearing.
Radial Load Acting on Bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Axial or Thrust Load Acting on Bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

STEP 1: Convert Input(s) to Base Unit

Equivalent Dynamic Load on Bearing: 9650 Newton --> 9650 Newton No Conversion Required
Radial Factor: 0.56 --> No Conversion Required
Race-Rotation Factor: 1.2 --> No Conversion Required
Radial Load Acting on Bearing: 8050 Newton --> 8050 Newton No Conversion Required
Axial or Thrust Load Acting on Bearing: 3000 Newton --> 3000 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y = (P_eq-(X*V*F_r))/F_a --> (9650-(0.56*1.2*8050))/3000

Evaluating ... ...

Y = 1.41346666666667

STEP 3: Convert Result to Output's Unit

1.41346666666667 --> No Conversion Required

FINAL ANSWER

1.41346666666667 ≈ 1.413467 <-- Thrust Factor for Bearing

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Rolling Contact Bearing » Rolling Contact Bearing Configuration » Thrust factor of Bearing given Race Rotation Factor

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Rolling Contact Bearing Configuration Calculators

Radial Factor of Roller Contact Bearing given Race Rotation Factor

LaTeX Go Radial Factor = (Equivalent Dynamic Load on Bearing-(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing))/(Race-Rotation Factor*Radial Load Acting on Bearing)

Radial Load on Bearing given Race Rotation Factor

LaTeX Go Radial Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing))/(Radial Factor*Race-Rotation Factor)

Race Rotation Factor of Roller Contact Bearing

LaTeX Go Race-Rotation Factor = (Equivalent Dynamic Load on Bearing-(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing))/(Radial Factor*Radial Load Acting on Bearing)

Axial Thrust Load on Bearing given Race Rotation Factor

LaTeX Go Axial or Thrust Load Acting on Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Thrust Factor for Bearing

Thrust factor of Bearing given Race Rotation Factor Formula

LaTeX Go

Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing
Y = (P_eq-(X*V*F_r))/F_a

What is a rolling contact bearing?

The term rolling contact bearings refers to the wide variety of bearings that use spherical balls or some other type of roller between the stationary and the moving elements. • The most common type of bearing supports a rotating shaft, resisting purely radial loads or a combination of radial and axial (thrust) loads

How to Calculate Thrust factor of Bearing given Race Rotation Factor?

Thrust factor of Bearing given Race Rotation Factor calculator uses Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing to calculate the Thrust Factor for Bearing, Thrust factor of Bearing given Race Rotation Factor is a factor to account for the thrust axial load acting onto the bearing. Thrust Factor for Bearing is denoted by Y symbol.

How to calculate Thrust factor of Bearing given Race Rotation Factor using this online calculator? To use this online calculator for Thrust factor of Bearing given Race Rotation Factor, enter Equivalent Dynamic Load on Bearing (P_eq), Radial Factor (X), Race-Rotation Factor (V), Radial Load Acting on Bearing (F_r) & Axial or Thrust Load Acting on Bearing (F_a) and hit the calculate button. Here is how the Thrust factor of Bearing given Race Rotation Factor calculation can be explained with given input values -> 1.413467 = (9650-(0.56*1.2*8050))/3000.

FAQ

What is Thrust factor of Bearing given Race Rotation Factor?

Thrust factor of Bearing given Race Rotation Factor is a factor to account for the thrust axial load acting onto the bearing and is represented as Y = (P_eq-(X*V*F_r))/F_a or Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing. Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing, Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load, Race-rotation factor is a factor accounting for the rotation of the races of a bearing, Radial load acting on bearing is the amount of load onto the bearing acting radially & Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

How to calculate Thrust factor of Bearing given Race Rotation Factor?

Thrust factor of Bearing given Race Rotation Factor is a factor to account for the thrust axial load acting onto the bearing is calculated using Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing. To calculate Thrust factor of Bearing given Race Rotation Factor, you need Equivalent Dynamic Load on Bearing (P_eq), Radial Factor (X), Race-Rotation Factor (V), Radial Load Acting on Bearing (F_r) & Axial or Thrust Load Acting on Bearing (F_a). With our tool, you need to enter the respective value for Equivalent Dynamic Load on Bearing, Radial Factor, Race-Rotation Factor, Radial Load Acting on Bearing & Axial or Thrust Load Acting on Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thrust Factor for Bearing?

In this formula, Thrust Factor for Bearing uses Equivalent Dynamic Load on Bearing, Radial Factor, Race-Rotation Factor, Radial Load Acting on Bearing & Axial or Thrust Load Acting on Bearing. We can use 1 other way(s) to calculate the same, which is/are as follows -

Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing

Home

FREE PDFs

🔍 Search