Tension on Loose Side of Band Calculator

✖Tension in Tight Side of Band Brake is the tension present in the loose side of the Band Brakes.ⓘ Tension in Tight Side of Band Brake [P₁]			+10% -10%
✖Coefficient of Friction For Band Brake is the ratio defining the force that resists the motion of the in relation to the drum in contact with it.ⓘ Coefficient of Friction For Band Brake [μ_b]			+10% -10%
✖The Angle of Wrap of Band is the angle between the run-up and run-off of the belt or the band on the drum.ⓘ Angle of Wrap of Band [α]			+10% -10%

✖Tension in Loose Side of Band Brake is the tension present in the loose side of the Band Brakes.ⓘ Tension on Loose Side of Band [P₂]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Automobile Elements Formula PDF PDF Image

Tension on Loose Side of Band Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tension in Loose Side of Band Brake = Tension in Tight Side of Band Brake/e^((Coefficient of Friction For Band Brake)*Angle of Wrap of Band)
P₂ = P₁/e^((μ_b)*α)
This formula uses 1 Constants, 4 Variables

Constants Used

e - Napier's constant Value Taken As 2.71828182845904523536028747135266249

Variables Used

Tension in Loose Side of Band Brake - (Measured in Newton) - Tension in Loose Side of Band Brake is the tension present in the loose side of the Band Brakes.
Tension in Tight Side of Band Brake - (Measured in Newton) - Tension in Tight Side of Band Brake is the tension present in the loose side of the Band Brakes.
Coefficient of Friction For Band Brake - Coefficient of Friction For Band Brake is the ratio defining the force that resists the motion of the in relation to the drum in contact with it.
Angle of Wrap of Band - (Measured in Radian) - The Angle of Wrap of Band is the angle between the run-up and run-off of the belt or the band on the drum.

STEP 1: Convert Input(s) to Base Unit

Tension in Tight Side of Band Brake: 15000 Newton --> 15000 Newton No Conversion Required
Coefficient of Friction For Band Brake: 0.46 --> No Conversion Required
Angle of Wrap of Band: 2.28 Radian --> 2.28 Radian No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P₂ = P₁/e^((μ_b)*α) --> 15000/e^((0.46)*2.28)

Evaluating ... ...

P₂ = 5255.36889699121

STEP 3: Convert Result to Output's Unit

5255.36889699121 Newton --> No Conversion Required

FINAL ANSWER

5255.36889699121 ≈ 5255.369 Newton <-- Tension in Loose Side of Band Brake

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Brakes » Mechanical » Band Brakes » Tension on Loose Side of Band

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Band Brakes Calculators

Coefficient of Friction between Friction Lining and Brake Drum

LaTeX Go Coefficient of Friction For Band Brake = ln(Tension in Tight Side of Band Brake/Tension in Loose Side of Band Brake)/Angle of Wrap of Band

Angle of Wrap given Tension on Loose Side of Band

LaTeX Go Angle of Wrap of Band = ln(Tension in Tight Side of Band Brake/Tension in Loose Side of Band Brake)/Coefficient of Friction For Band Brake

Tension on Loose Side of Band

LaTeX Go Tension in Loose Side of Band Brake = Tension in Tight Side of Band Brake/e^((Coefficient of Friction For Band Brake)*Angle of Wrap of Band)

Tension of Tight Side of Band

LaTeX Go Tension in Tight Side of Band Brake = Tension in Loose Side of Band Brake*e^(Coefficient of Friction For Band Brake*Angle of Wrap of Band)

Tension on Loose Side of Band Formula

LaTeX Go

Tension in Loose Side of Band Brake = Tension in Tight Side of Band Brake/e^((Coefficient of Friction For Band Brake)*Angle of Wrap of Band)
P₂ = P₁/e^((μ_b)*α)

Define a Band Brake?

Band Brake is defined as a friction brake used especially in vehicles, cranes, and hoists that consists of a flexible band around a revolving drum and is operated by tightening the band.

How to Calculate Tension on Loose Side of Band?

Tension on Loose Side of Band calculator uses Tension in Loose Side of Band Brake = Tension in Tight Side of Band Brake/e^((Coefficient of Friction For Band Brake)*Angle of Wrap of Band) to calculate the Tension in Loose Side of Band Brake, Tension on Loose Side of Band in a belt drive system refers to the force exerted on the side of the belt that is not being pulled tightly by the driving pulley. This tension is typically lower than the tension on the tight side and is crucial for calculating the power transmission capacity and ensuring proper operation of the belt drive. Tension in Loose Side of Band Brake is denoted by P₂ symbol.

How to calculate Tension on Loose Side of Band using this online calculator? To use this online calculator for Tension on Loose Side of Band, enter Tension in Tight Side of Band Brake (P₁), Coefficient of Friction For Band Brake (μ_b) & Angle of Wrap of Band (α) and hit the calculate button. Here is how the Tension on Loose Side of Band calculation can be explained with given input values -> 5255.369 = 15000/e^((0.46)*2.28).

FAQ

What is Tension on Loose Side of Band?

Tension on Loose Side of Band in a belt drive system refers to the force exerted on the side of the belt that is not being pulled tightly by the driving pulley. This tension is typically lower than the tension on the tight side and is crucial for calculating the power transmission capacity and ensuring proper operation of the belt drive and is represented as P₂ = P₁/e^((μ_b)*α) or Tension in Loose Side of Band Brake = Tension in Tight Side of Band Brake/e^((Coefficient of Friction For Band Brake)*Angle of Wrap of Band). Tension in Tight Side of Band Brake is the tension present in the loose side of the Band Brakes, Coefficient of Friction For Band Brake is the ratio defining the force that resists the motion of the in relation to the drum in contact with it & The Angle of Wrap of Band is the angle between the run-up and run-off of the belt or the band on the drum.

How to calculate Tension on Loose Side of Band?

Tension on Loose Side of Band in a belt drive system refers to the force exerted on the side of the belt that is not being pulled tightly by the driving pulley. This tension is typically lower than the tension on the tight side and is crucial for calculating the power transmission capacity and ensuring proper operation of the belt drive is calculated using Tension in Loose Side of Band Brake = Tension in Tight Side of Band Brake/e^((Coefficient of Friction For Band Brake)*Angle of Wrap of Band). To calculate Tension on Loose Side of Band, you need Tension in Tight Side of Band Brake (P₁), Coefficient of Friction For Band Brake (μ_b) & Angle of Wrap of Band (α). With our tool, you need to enter the respective value for Tension in Tight Side of Band Brake, Coefficient of Friction For Band Brake & Angle of Wrap of Band and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tension in Loose Side of Band Brake?

In this formula, Tension in Loose Side of Band Brake uses Tension in Tight Side of Band Brake, Coefficient of Friction For Band Brake & Angle of Wrap of Band. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tension in Loose Side of Band Brake = Tension in Tight Side of Band Brake-Torque Absorbed By Brake/Radius of Brake Drum

Home

FREE PDFs

🔍 Search