Tension in Tight Side of Band for Simple Band Brake Calculator

✖Tension in the slack side of band is described as the pulling force transmitted axially by the means of a string, a cable, chain, etc.ⓘ Tension in the Slack Side of Band [T₂]			+10% -10%
✖Coefficient of Friction for Brake is the ratio defining the force that resists the motion of the brake pad in relation to the brake disc or drum in contact with it.ⓘ Coefficient of Friction for Brake [μ]			+10% -10%
✖The angle of lap of band on the drum is defined as the angle subtended by the portion of the belt which is in contact at the pulley surface of the pulley.ⓘ Angle of Lap of Band on the Drum [θ]			+10% -10%

✖Tension in tight side of the band is described as the pulling force transmitted axially by the means of a string, a cable, chain etc.ⓘ Tension in Tight Side of Band for Simple Band Brake [T₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Brakes and Dynamometers Formula PDF PDF Image

Tension in Tight Side of Band for Simple Band Brake Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tension in Tight Side of the Band = Tension in the Slack Side of Band*e^(Coefficient of Friction for Brake*Angle of Lap of Band on the Drum)
T₁ = T₂*e^(μ*θ)
This formula uses 1 Constants, 4 Variables

Constants Used

e - Napier's constant Value Taken As 2.71828182845904523536028747135266249

Variables Used

Tension in Tight Side of the Band - (Measured in Newton) - Tension in tight side of the band is described as the pulling force transmitted axially by the means of a string, a cable, chain etc.
Tension in the Slack Side of Band - (Measured in Newton) - Tension in the slack side of band is described as the pulling force transmitted axially by the means of a string, a cable, chain, etc.
Coefficient of Friction for Brake - Coefficient of Friction for Brake is the ratio defining the force that resists the motion of the brake pad in relation to the brake disc or drum in contact with it.
Angle of Lap of Band on the Drum - (Measured in Radian) - The angle of lap of band on the drum is defined as the angle subtended by the portion of the belt which is in contact at the pulley surface of the pulley.

STEP 1: Convert Input(s) to Base Unit

Tension in the Slack Side of Band: 500 Newton --> 500 Newton No Conversion Required
Coefficient of Friction for Brake: 0.35 --> No Conversion Required
Angle of Lap of Band on the Drum: 1.04 Radian --> 1.04 Radian No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T₁ = T₂*e^(μ*θ) --> 500*e^(0.35*1.04)

Evaluating ... ...

T₁ = 719.537107079023

STEP 3: Convert Result to Output's Unit

719.537107079023 Newton --> No Conversion Required

FINAL ANSWER

719.537107079023 ≈ 719.5371 Newton <-- Tension in Tight Side of the Band

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Brakes and Dynamometers » Mechanical » Brake » Tension in Tight Side of Band for Simple Band Brake

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Brake Calculators

Tension in Band between First and Second Block for Band and Block Brake

LaTeX Go Tension in Band Between the First and Second Block = Tension in Tight Side of the Band*(1-Coefficient of Friction for Brake*sin(Angle of Contact/2))/(1+Coefficient of Friction for Brake*sin(Angle of Contact/2))

Tension in Tight Side for Band and Block Brake

LaTeX Go Tension in Tight Side of the Band = Tension in Band Between the First and Second Block*(1+Coefficient of Friction for Brake*sin(Angle of Contact/2))/(1-Coefficient of Friction for Brake*sin(Angle of Contact/2))

Tension in Tight Side of Band for Simple Band Brake given Permissible Tensile Stress

LaTeX Go Tension in Tight Side of the Band = Permissible Tensile Strength*Width of Band*Thickness of Band

Effective Radius of Drum for Simple Band Brake

LaTeX Go Effective Radius of the Drum = Radius of the Drum+Thickness of Band/2

Tension in Tight Side of Band for Simple Band Brake Formula

LaTeX Go

Tension in Tight Side of the Band = Tension in the Slack Side of Band*e^(Coefficient of Friction for Brake*Angle of Lap of Band on the Drum)
T₁ = T₂*e^(μ*θ)

What is simple band brake?

A simple band brake in which one end of the band is attached to a fixed pin or fulcrum of the lever while the other end is attached to the lever at a distance b from the fulcrum.

How to Calculate Tension in Tight Side of Band for Simple Band Brake?

Tension in Tight Side of Band for Simple Band Brake calculator uses Tension in Tight Side of the Band = Tension in the Slack Side of Band*e^(Coefficient of Friction for Brake*Angle of Lap of Band on the Drum) to calculate the Tension in Tight Side of the Band, Tension in Tight Side of Band for Simple Band Brake formula is defined as the maximum tension that occurs on the tight side of the band in a simple band brake system, which is influenced by the normal force, coefficient of friction, and angle of wrap. Tension in Tight Side of the Band is denoted by T₁ symbol.

How to calculate Tension in Tight Side of Band for Simple Band Brake using this online calculator? To use this online calculator for Tension in Tight Side of Band for Simple Band Brake, enter Tension in the Slack Side of Band (T₂), Coefficient of Friction for Brake (μ) & Angle of Lap of Band on the Drum (θ) and hit the calculate button. Here is how the Tension in Tight Side of Band for Simple Band Brake calculation can be explained with given input values -> 1006.876 = 500*e^(0.35*1.04).

FAQ

What is Tension in Tight Side of Band for Simple Band Brake?

Tension in Tight Side of Band for Simple Band Brake formula is defined as the maximum tension that occurs on the tight side of the band in a simple band brake system, which is influenced by the normal force, coefficient of friction, and angle of wrap and is represented as T₁ = T₂*e^(μ*θ) or Tension in Tight Side of the Band = Tension in the Slack Side of Band*e^(Coefficient of Friction for Brake*Angle of Lap of Band on the Drum). Tension in the slack side of band is described as the pulling force transmitted axially by the means of a string, a cable, chain, etc, Coefficient of Friction for Brake is the ratio defining the force that resists the motion of the brake pad in relation to the brake disc or drum in contact with it & The angle of lap of band on the drum is defined as the angle subtended by the portion of the belt which is in contact at the pulley surface of the pulley.

How to calculate Tension in Tight Side of Band for Simple Band Brake?

Tension in Tight Side of Band for Simple Band Brake formula is defined as the maximum tension that occurs on the tight side of the band in a simple band brake system, which is influenced by the normal force, coefficient of friction, and angle of wrap is calculated using Tension in Tight Side of the Band = Tension in the Slack Side of Band*e^(Coefficient of Friction for Brake*Angle of Lap of Band on the Drum). To calculate Tension in Tight Side of Band for Simple Band Brake, you need Tension in the Slack Side of Band (T₂), Coefficient of Friction for Brake (μ) & Angle of Lap of Band on the Drum (θ). With our tool, you need to enter the respective value for Tension in the Slack Side of Band, Coefficient of Friction for Brake & Angle of Lap of Band on the Drum and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tension in Tight Side of the Band?

In this formula, Tension in Tight Side of the Band uses Tension in the Slack Side of Band, Coefficient of Friction for Brake & Angle of Lap of Band on the Drum. We can use 2 other way(s) to calculate the same, which is/are as follows -

Tension in Tight Side of the Band = Tension in Band Between the First and Second Block*(1+Coefficient of Friction for Brake*sin(Angle of Contact/2))/(1-Coefficient of Friction for Brake*sin(Angle of Contact/2))
Tension in Tight Side of the Band = Permissible Tensile Strength*Width of Band*Thickness of Band

Home

FREE PDFs

🔍 Search