Tension in Tight Side of Belt for Belt Transmission Dynamometer Calculator

✖Tension in Slack Side of Belt is the force exerted on the slack side of a belt in a dynamometer, measuring the torque of a rotating shaft.ⓘ Tension in Slack Side of Belt [T₂]			+10% -10%
✖Weight at Outer End of Lever is the force exerted at the outer end of a lever in a dynamometer, used to measure torque or rotational force.ⓘ Weight at Outer End of Lever [W_end]			+10% -10%
✖Distance between Weight and Center of Pulley is the length between the weight attached to a dynamometer and the center of the pulley.ⓘ Distance between Weight and Center of Pulley [L_horizontal]			+10% -10%
✖Distance between Loose Pulleys and T-Frame is the measurement of the space between the loose pulleys and the T-frame in a dynamometer setup.ⓘ Distance between Loose Pulleys and T-Frame [a_pulley]			+10% -10%

✖Tension in Tight Side of Belt is the force exerted on the tight side of a belt in a dynamometer, measuring the rotational force or torque.ⓘ Tension in Tight Side of Belt for Belt Transmission Dynamometer [T₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Dynamometer Formulas PDF PDF Image

Tension in Tight Side of Belt for Belt Transmission Dynamometer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame)
T₁ = T₂+(W_end*L_horizontal)/(2*a_pulley)
This formula uses 5 Variables

Variables Used

Tension in Tight Side of Belt - (Measured in Newton) - Tension in Tight Side of Belt is the force exerted on the tight side of a belt in a dynamometer, measuring the rotational force or torque.
Tension in Slack Side of Belt - (Measured in Newton) - Tension in Slack Side of Belt is the force exerted on the slack side of a belt in a dynamometer, measuring the torque of a rotating shaft.
Weight at Outer End of Lever - (Measured in Newton) - Weight at Outer End of Lever is the force exerted at the outer end of a lever in a dynamometer, used to measure torque or rotational force.
Distance between Weight and Center of Pulley - (Measured in Meter) - Distance between Weight and Center of Pulley is the length between the weight attached to a dynamometer and the center of the pulley.
Distance between Loose Pulleys and T-Frame - (Measured in Meter) - Distance between Loose Pulleys and T-Frame is the measurement of the space between the loose pulleys and the T-frame in a dynamometer setup.

STEP 1: Convert Input(s) to Base Unit

Tension in Slack Side of Belt: 19.07683 Newton --> 19.07683 Newton No Conversion Required
Weight at Outer End of Lever: 19 Newton --> 19 Newton No Conversion Required
Distance between Weight and Center of Pulley: 0.6843 Meter --> 0.6843 Meter No Conversion Required
Distance between Loose Pulleys and T-Frame: 0.9 Meter --> 0.9 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T₁ = T₂+(W_end*L_horizontal)/(2*a_pulley) --> 19.07683+(19*0.6843)/(2*0.9)

Evaluating ... ...

T₁ = 26.2999966666667

STEP 3: Convert Result to Output's Unit

26.2999966666667 Newton --> No Conversion Required

FINAL ANSWER

26.2999966666667 ≈ 26.3 Newton <-- Tension in Tight Side of Belt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Brakes and Dynamometers » Mechanical » Dynamometer » Tension in Tight Side of Belt for Belt Transmission Dynamometer

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Dynamometer Calculators

Tangential Effort for Epicyclic-Train Dynamometer

LaTeX Go Tangential Effort = (Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Center of Gear and Pinion)

Constant for Particular Shaft for Torsion Dynamometer

LaTeX Go Constant for a Particular Shaft = (Modulus of Rigidity*Polar Moment of Inertia of Shaft)/Shaft Length

Distance Moved in One Revolution by Rope Brake Dynamometer

LaTeX Go Distance Moved = pi*(Diameter of Wheel+Diameter of Rope)

Load on Brake for Rope Brake Dynamometer

LaTeX Go Load Applied = Dead Load-Spring Balance Reading

Tension in Tight Side of Belt for Belt Transmission Dynamometer Formula

LaTeX Go

What is Transmission Dynamometer?

A transmission dynamometer is a device used to measure the power transmitted by a rotating shaft or system. It operates by sensing the torque and rotational speed of the shaft, enabling the calculation of power output. Transmission dynamometers are commonly used in engine testing, machinery, and automotive applications to assess performance and efficiency of power transmission systems.

How to Calculate Tension in Tight Side of Belt for Belt Transmission Dynamometer?

Tension in Tight Side of Belt for Belt Transmission Dynamometer calculator uses Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame) to calculate the Tension in Tight Side of Belt, Tension in Tight Side of Belt for Belt Transmission Dynamometer formula is defined as a measure of the force exerted on the tight side of the belt in a belt transmission dynamometer, which is a device used to measure the torque or rotational force of an engine or other machine. Tension in Tight Side of Belt is denoted by T₁ symbol.

How to calculate Tension in Tight Side of Belt for Belt Transmission Dynamometer using this online calculator? To use this online calculator for Tension in Tight Side of Belt for Belt Transmission Dynamometer, enter Tension in Slack Side of Belt (T₂), Weight at Outer End of Lever (W_end), Distance between Weight and Center of Pulley (L_horizontal) & Distance between Loose Pulleys and T-Frame (a_pulley) and hit the calculate button. Here is how the Tension in Tight Side of Belt for Belt Transmission Dynamometer calculation can be explained with given input values -> 18.22317 = 19.07683+(19*0.6843)/(2*0.9).

FAQ

What is Tension in Tight Side of Belt for Belt Transmission Dynamometer?

Tension in Tight Side of Belt for Belt Transmission Dynamometer formula is defined as a measure of the force exerted on the tight side of the belt in a belt transmission dynamometer, which is a device used to measure the torque or rotational force of an engine or other machine and is represented as T₁ = T₂+(W_end*L_horizontal)/(2*a_pulley) or Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame). Tension in Slack Side of Belt is the force exerted on the slack side of a belt in a dynamometer, measuring the torque of a rotating shaft, Weight at Outer End of Lever is the force exerted at the outer end of a lever in a dynamometer, used to measure torque or rotational force, Distance between Weight and Center of Pulley is the length between the weight attached to a dynamometer and the center of the pulley & Distance between Loose Pulleys and T-Frame is the measurement of the space between the loose pulleys and the T-frame in a dynamometer setup.

How to calculate Tension in Tight Side of Belt for Belt Transmission Dynamometer?

Tension in Tight Side of Belt for Belt Transmission Dynamometer formula is defined as a measure of the force exerted on the tight side of the belt in a belt transmission dynamometer, which is a device used to measure the torque or rotational force of an engine or other machine is calculated using Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame). To calculate Tension in Tight Side of Belt for Belt Transmission Dynamometer, you need Tension in Slack Side of Belt (T₂), Weight at Outer End of Lever (W_end), Distance between Weight and Center of Pulley (L_horizontal) & Distance between Loose Pulleys and T-Frame (a_pulley). With our tool, you need to enter the respective value for Tension in Slack Side of Belt, Weight at Outer End of Lever, Distance between Weight and Center of Pulley & Distance between Loose Pulleys and T-Frame and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search