Tension at Supports for UDL on Parabolic Cable Calculator

✖Tension at midspan is the total tension acting in cable at midpoint.ⓘ Tension at Midspan [T_mid]			+10% -10%
✖Uniformly distributed Load (UDL) is a load that is distributed or spread across the whole region of an element whose magnitude of the load remains uniform throughout the whole element.ⓘ Uniformly Distributed Load [q]			+10% -10%
✖Cable Span is total length of cable in horizontal direction.ⓘ Cable Span [L_span]			+10% -10%

✖Tension at Supports is the tension due to loading on supports.ⓘ Tension at Supports for UDL on Parabolic Cable [T_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parabolic Cable Tension and Length Formulas PDF PDF Image

Tension at Supports for UDL on Parabolic Cable Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tension at Supports = sqrt((Tension at Midspan^2)+(Uniformly Distributed Load*Cable Span/2)^2)
T_s = sqrt((T_mid^2)+(q*L_span/2)^2)
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Tension at Supports - (Measured in Newton) - Tension at Supports is the tension due to loading on supports.
Tension at Midspan - (Measured in Newton) - Tension at midspan is the total tension acting in cable at midpoint.
Uniformly Distributed Load - (Measured in Newton per Meter) - Uniformly distributed Load (UDL) is a load that is distributed or spread across the whole region of an element whose magnitude of the load remains uniform throughout the whole element.
Cable Span - (Measured in Meter) - Cable Span is total length of cable in horizontal direction.

STEP 1: Convert Input(s) to Base Unit

Tension at Midspan: 196 Kilonewton --> 196000 Newton (Check conversion here)
Uniformly Distributed Load: 10 Kilonewton per Meter --> 10000 Newton per Meter (Check conversion here)
Cable Span: 15 Meter --> 15 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_s = sqrt((T_mid^2)+(q*L_span/2)^2) --> sqrt((196000^2)+(10000*15/2)^2)

Evaluating ... ...

T_s = 209859.476793401

STEP 3: Convert Result to Output's Unit

209859.476793401 Newton -->209.859476793401 Kilonewton (Check conversion here)

FINAL ANSWER

209.859476793401 ≈ 209.8595 Kilonewton <-- Tension at Supports

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Bridge and Suspension Cable » Suspension Cables » Parabolic Cable Tension and Length » Tension at Supports for UDL on Parabolic Cable

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Himanshi Sharma

Bhilai Institute of Technology (BIT), Raipur

Himanshi Sharma has verified this Calculator and 800+ more calculators!

< Parabolic Cable Tension and Length Calculators

Tension at Midspan given Tension at Supports for UDL on Parabolic Cable

LaTeX Go Tension at Midspan = sqrt((Tension at Supports^2)-(((Uniformly Distributed Load*Cable Span)/2)^2))

UDL given Tension at Supports for UDL on Parabolic Cable

LaTeX Go Uniformly Distributed Load = (sqrt((Tension at Supports^2)-(Tension at Midspan^2))*2)/Cable Span

Tension at Supports for UDL on Parabolic Cable

LaTeX Go Tension at Supports = sqrt((Tension at Midspan^2)+(Uniformly Distributed Load*Cable Span/2)^2)

Maximum Sag given Tension at Midspan for UDL on Parabolic Cable

LaTeX Go Maximum Sag = Uniformly Distributed Load*(Cable Span^2)/(8*Tension at Midspan)

Tension at Supports for UDL on Parabolic Cable Formula

LaTeX Go

Tension at Supports = sqrt((Tension at Midspan^2)+(Uniformly Distributed Load*Cable Span/2)^2)
T_s = sqrt((T_mid^2)+(q*L_span/2)^2)

What is Tension in Cable?

The pulling force that acts along with a stretched flexible connector, such as a rope or cable, is called tension, T. When a rope supports the weight of an object that is at rest, the tension in the rope is equal to the weight of the object: T = mg.

How to Calculate Tension at Supports for UDL on Parabolic Cable?

Tension at Supports for UDL on Parabolic Cable calculator uses Tension at Supports = sqrt((Tension at Midspan^2)+(Uniformly Distributed Load*Cable Span/2)^2) to calculate the Tension at Supports, The Tension at Supports for UDL on Parabolic Cable formula is defined as the total force acting on the supports in both horizontal and vertical directions. Tension at Supports is denoted by T_s symbol.

How to calculate Tension at Supports for UDL on Parabolic Cable using this online calculator? To use this online calculator for Tension at Supports for UDL on Parabolic Cable, enter Tension at Midspan (T_mid), Uniformly Distributed Load (q) & Cable Span (L_span) and hit the calculate button. Here is how the Tension at Supports for UDL on Parabolic Cable calculation can be explained with given input values -> 0.209859 = sqrt((196000^2)+(10000*15/2)^2).

FAQ

What is Tension at Supports for UDL on Parabolic Cable?

The Tension at Supports for UDL on Parabolic Cable formula is defined as the total force acting on the supports in both horizontal and vertical directions and is represented as T_s = sqrt((T_mid^2)+(q*L_span/2)^2) or Tension at Supports = sqrt((Tension at Midspan^2)+(Uniformly Distributed Load*Cable Span/2)^2). Tension at midspan is the total tension acting in cable at midpoint, Uniformly distributed Load (UDL) is a load that is distributed or spread across the whole region of an element whose magnitude of the load remains uniform throughout the whole element & Cable Span is total length of cable in horizontal direction.

How to calculate Tension at Supports for UDL on Parabolic Cable?

The Tension at Supports for UDL on Parabolic Cable formula is defined as the total force acting on the supports in both horizontal and vertical directions is calculated using Tension at Supports = sqrt((Tension at Midspan^2)+(Uniformly Distributed Load*Cable Span/2)^2). To calculate Tension at Supports for UDL on Parabolic Cable, you need Tension at Midspan (T_mid), Uniformly Distributed Load (q) & Cable Span (L_span). With our tool, you need to enter the respective value for Tension at Midspan, Uniformly Distributed Load & Cable Span and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search