Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety Calculator

✖Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.ⓘ Factor of Safety [f_s]			+10% -10%
✖First Principal Stress is the first one among the two or three principal stresses acting on a biaxial or triaxial stressed component.ⓘ First Principal Stress [σ₁]			+10% -10%
✖Second Principal Stress is the second one among the two or three principal stresses acting on a biaxial or triaxial stressed component.ⓘ Second Principal Stress [σ₂]			+10% -10%

✖Tensile Yield Strength is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.ⓘ Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety [σ_y]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Yield Strength = Factor of Safety*sqrt(First Principal Stress^2+Second Principal Stress^2-First Principal Stress*Second Principal Stress)
σ_y = f_s*sqrt(σ₁^2+σ₂^2-σ₁*σ₂)
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Tensile Yield Strength - (Measured in Pascal) - Tensile Yield Strength is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Factor of Safety - Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.
First Principal Stress - (Measured in Pascal) - First Principal Stress is the first one among the two or three principal stresses acting on a biaxial or triaxial stressed component.
Second Principal Stress - (Measured in Pascal) - Second Principal Stress is the second one among the two or three principal stresses acting on a biaxial or triaxial stressed component.

STEP 1: Convert Input(s) to Base Unit

Factor of Safety: 2 --> No Conversion Required
First Principal Stress: 35 Newton per Square Millimeter --> 35000000 Pascal (Check conversion here)
Second Principal Stress: 47 Newton per Square Millimeter --> 47000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_y = f_s*sqrt(σ₁^2+σ₂^2-σ₁*σ₂) --> 2*sqrt(35000000^2+47000000^2-35000000*47000000)

Evaluating ... ...

σ_y = 84593143.9302264

STEP 3: Convert Result to Output's Unit

84593143.9302264 Pascal -->84.5931439302264 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

84.5931439302264 ≈ 84.59314 Newton per Square Millimeter <-- Tensile Yield Strength

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design Against Static Load » Theories of Failure » Distortion Energy Theory » Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Distortion Energy Theory Calculators

Stress due to Change in Volume with No Distortion

LaTeX Go Stress for Volume Change = (First Principal Stress+Second Principal Stress+Third Principal Stress)/3

Total Strain Energy per Unit Volume

LaTeX Go Total Strain Energy per Unit Volume = Strain Energy for Distortion+Strain Energy for Volume Change

Strain Energy due to Change in Volume given Volumetric Stress

LaTeX Go Strain Energy for Volume Change = 3/2*Stress for Volume Change*Strain for Volume Change

Shear Yield Strength by Maximum Distortion Energy Theory

LaTeX Go Shear Yield Strength = 0.577*Tensile Yield Strength

Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety Formula

LaTeX Go

Tensile Yield Strength = Factor of Safety*sqrt(First Principal Stress^2+Second Principal Stress^2-First Principal Stress*Second Principal Stress)
σ_y = f_s*sqrt(σ₁^2+σ₂^2-σ₁*σ₂)

What is strain energy?

Strain energy is defined as the energy stored in a body due to deformation. The strain energy per unit volume is known as strain energy density and the area under the stress-strain curve towards the point of deformation. When the applied force is released, the whole system returns to its original shape. It is usually denoted by U.

How to Calculate Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety?

Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety calculator uses Tensile Yield Strength = Factor of Safety*sqrt(First Principal Stress^2+Second Principal Stress^2-First Principal Stress*Second Principal Stress) to calculate the Tensile Yield Strength, Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions. Tensile Yield Strength is denoted by σ_y symbol.

How to calculate Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety using this online calculator? To use this online calculator for Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety, enter Factor of Safety (f_s), First Principal Stress (σ₁) & Second Principal Stress (σ₂) and hit the calculate button. Here is how the Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety calculation can be explained with given input values -> 8.5E-5 = 2*sqrt(35000000^2+47000000^2-35000000*47000000).

FAQ

What is Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety?

Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions and is represented as σ_y = f_s*sqrt(σ₁^2+σ₂^2-σ₁*σ₂) or Tensile Yield Strength = Factor of Safety*sqrt(First Principal Stress^2+Second Principal Stress^2-First Principal Stress*Second Principal Stress). Factor of Safety expresses how much stronger a system is than it needs to be for an intended load, First Principal Stress is the first one among the two or three principal stresses acting on a biaxial or triaxial stressed component & Second Principal Stress is the second one among the two or three principal stresses acting on a biaxial or triaxial stressed component.

How to calculate Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety?

Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions is calculated using Tensile Yield Strength = Factor of Safety*sqrt(First Principal Stress^2+Second Principal Stress^2-First Principal Stress*Second Principal Stress). To calculate Tensile Yield Strength for Biaxial Stress by Distortion Energy Theorem Considering Factor of Safety, you need Factor of Safety (f_s), First Principal Stress (σ₁) & Second Principal Stress (σ₂). With our tool, you need to enter the respective value for Factor of Safety, First Principal Stress & Second Principal Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Yield Strength?

In this formula, Tensile Yield Strength uses Factor of Safety, First Principal Stress & Second Principal Stress. We can use 2 other way(s) to calculate the same, which is/are as follows -

Tensile Yield Strength = sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2))
Tensile Yield Strength = Factor of Safety*sqrt(1/2*((First Principal Stress-Second Principal Stress)^2+(Second Principal Stress-Third Principal Stress)^2+(Third Principal Stress-First Principal Stress)^2))

Home

FREE PDFs

🔍 Search