Tensile Stress using External Applied Load Solution

STEP 0: Pre-Calculation Summary
Formula Used
Tensile Stress = (External Applied Load)/(Cross Sectional Area)
ft = (W)/(A)
This formula uses 3 Variables
Variables Used
Tensile Stress - (Measured in Pascal) - Tensile Stress is the elongation of the material when a stretching force is applied along with the axis of applied force.
External Applied Load - (Measured in Newton) - External Applied Load are forces capable of doing virtual work when subject to a virtual displacement.
Cross Sectional Area - (Measured in Square Meter) - Cross sectional area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.
STEP 1: Convert Input(s) to Base Unit
External Applied Load: 100 Newton --> 100 Newton No Conversion Required
Cross Sectional Area: 10.5 Square Millimeter --> 1.05E-05 Square Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ft = (W)/(A) --> (100)/(1.05E-05)
Evaluating ... ...
ft = 9523809.52380952
STEP 3: Convert Result to Output's Unit
9523809.52380952 Pascal -->9.52380952380952 Newton per Square Millimeter (Check conversion ​here)
FINAL ANSWER
9.52380952380952 9.52381 Newton per Square Millimeter <-- Tensile Stress
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Heet
Thadomal Shahani Engineering College (Tsec), Mumbai
Heet has created this Calculator and 200+ more calculators!
Verifier Image
Verified by Soupayan banerjee
National University of Judicial Science (NUJS), Kolkata
Soupayan banerjee has verified this Calculator and 900+ more calculators!

Fundamental Stress Analysis Calculators

Bending Moment due to Stresses
​ LaTeX ​ Go Applied Bending Moment = (Tensile Bending Stress*Moment of Inertia)/(Distance)
Shear Stress using External Applied Load
​ LaTeX ​ Go Shear Stress in Bolt = (External Applied Load)/(Cross Sectional Area)
Compressive Stress using External Applied Load
​ LaTeX ​ Go Compressive Stress = (External Applied Load)/(Cross Sectional Area)
Tensile Stress using External Applied Load
​ LaTeX ​ Go Tensile Stress = (External Applied Load)/(Cross Sectional Area)

Tensile Stress using External Applied Load Formula

​LaTeX ​Go
Tensile Stress = (External Applied Load)/(Cross Sectional Area)
ft = (W)/(A)

What is Tensile Stress?

Tensile stress is the elongation of the material when a stretching force is applied along with the axis of applied force.

How to Calculate Tensile Stress using External Applied Load?

Tensile Stress using External Applied Load calculator uses Tensile Stress = (External Applied Load)/(Cross Sectional Area) to calculate the Tensile Stress, Tensile Stress using External Applied Load is the elongation of the material when a stretching force is applied along with the axis of applied force. Tensile Stress is denoted by ft symbol.

How to calculate Tensile Stress using External Applied Load using this online calculator? To use this online calculator for Tensile Stress using External Applied Load, enter External Applied Load (W) & Cross Sectional Area (A) and hit the calculate button. Here is how the Tensile Stress using External Applied Load calculation can be explained with given input values -> 9.5E-6 = (100)/(1.05E-05).

FAQ

What is Tensile Stress using External Applied Load?
Tensile Stress using External Applied Load is the elongation of the material when a stretching force is applied along with the axis of applied force and is represented as ft = (W)/(A) or Tensile Stress = (External Applied Load)/(Cross Sectional Area). External Applied Load are forces capable of doing virtual work when subject to a virtual displacement & Cross sectional area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.
How to calculate Tensile Stress using External Applied Load?
Tensile Stress using External Applied Load is the elongation of the material when a stretching force is applied along with the axis of applied force is calculated using Tensile Stress = (External Applied Load)/(Cross Sectional Area). To calculate Tensile Stress using External Applied Load, you need External Applied Load (W) & Cross Sectional Area (A). With our tool, you need to enter the respective value for External Applied Load & Cross Sectional Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!