Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter Calculator

✖The Tensile Force on Bolt is the magnitude of the force applied along the bolt axis trying to stretch the bolt.ⓘ Tensile Force on Bolt [P]			+10% -10%
✖Core Diameter of Threaded Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.ⓘ Core Diameter of Threaded Bolt [d_c']			+10% -10%

✖Tensile Stress in Bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter [σ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Structural Response and Force Analysis Formulas PDF PDF Image

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2)
σ_t = P/(pi/4*d_c'^2)
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Tensile Stress in Bolt - (Measured in Pascal) - Tensile Stress in Bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Tensile Force on Bolt - (Measured in Newton) - The Tensile Force on Bolt is the magnitude of the force applied along the bolt axis trying to stretch the bolt.
Core Diameter of Threaded Bolt - (Measured in Meter) - Core Diameter of Threaded Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.

STEP 1: Convert Input(s) to Base Unit

Tensile Force on Bolt: 28200 Newton --> 28200 Newton No Conversion Required
Core Diameter of Threaded Bolt: 8.5 Millimeter --> 0.0085 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = P/(pi/4*d_c'^2) --> 28200/(pi/4*0.0085^2)

Evaluating ... ...

σ_t = 496959933.031579

STEP 3: Convert Result to Output's Unit

496959933.031579 Pascal -->496.959933031579 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

496.959933031579 ≈ 496.9599 Newton per Square Millimeter <-- Tensile Stress in Bolt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Threaded Fastener » Mechanical » Structural Response and Force Analysis » Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Structural Response and Force Analysis Calculators

Tensile Stress Area of Threaded fastener

LaTeX Go Tensile Stress Area of Threaded Fastener = pi/4*((Pitch Diameter of External Thread+Minor Diameter of External Thread)/2)^2

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter

LaTeX Go Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2)

Tensile Force acting on Bolt given Tensile Stress

LaTeX Go Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4

Tensile Yield Strength of Bolt

LaTeX Go Tensile Yield Strength of Bolt = Factor of Safety For Bolt*Tensile Stress in Bolt

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter Formula

LaTeX Go

Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2)
σ_t = P/(pi/4*d_c'^2)

What is a fastener?

A fastener or fastening is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.

How to Calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter?

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter calculator uses Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2) to calculate the Tensile Stress in Bolt, Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter is calculated by dividing the tensile force by the cross-sectional area of the core. The core area is based on the core diameter, which is the diameter of the bolt's internal section where the stress is considered. Tensile Stress in Bolt is denoted by σ_t symbol.

How to calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter using this online calculator? To use this online calculator for Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter, enter Tensile Force on Bolt (P) & Core Diameter of Threaded Bolt (d_c') and hit the calculate button. Here is how the Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter calculation can be explained with given input values -> 0.000497 = 28200/(pi/4*0.0085^2).

FAQ

What is Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter?

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter is calculated by dividing the tensile force by the cross-sectional area of the core. The core area is based on the core diameter, which is the diameter of the bolt's internal section where the stress is considered and is represented as σ_t = P/(pi/4*d_c'^2) or Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2). The Tensile Force on Bolt is the magnitude of the force applied along the bolt axis trying to stretch the bolt & Core Diameter of Threaded Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.

How to calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter?

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter is calculated by dividing the tensile force by the cross-sectional area of the core. The core area is based on the core diameter, which is the diameter of the bolt's internal section where the stress is considered is calculated using Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2). To calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter, you need Tensile Force on Bolt (P) & Core Diameter of Threaded Bolt (d_c'). With our tool, you need to enter the respective value for Tensile Force on Bolt & Core Diameter of Threaded Bolt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress in Bolt?

In this formula, Tensile Stress in Bolt uses Tensile Force on Bolt & Core Diameter of Threaded Bolt. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Stress in Bolt = Tensile Yield Strength of Bolt/Factor of Safety For Bolt

Home

FREE PDFs

🔍 Search