Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Fork Eye of Knuckle Joint [a]			+10% -10%
✖Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.ⓘ Outer Diameter of Eye of Knuckle Joint [d_o]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure.ⓘ Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter [σ_tf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
σ_tf = L/(2*a*(d_o-d))
This formula uses 5 Variables

Variables Used

Tensile Stress in Fork of Knuckle Joint - (Measured in Pascal) - Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Thickess of Fork Eye of Knuckle Joint: 26.6 Millimeter --> 0.0266 Meter (Check conversion here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_tf = L/(2*a*(d_o-d)) --> 45000/(2*0.0266*(0.08-0.037))

Evaluating ... ...

σ_tf = 19671271.201259

STEP 3: Convert Result to Output's Unit

19671271.201259 Pascal -->19.671271201259 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

19.671271201259 ≈ 19.67127 Newton per Square Millimeter <-- Tensile Stress in Fork of Knuckle Joint

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Eye » Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Eye Calculators

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

LaTeX Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

LaTeX Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Formula

LaTeX Go

Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
σ_tf = L/(2*a*(d_o-d))

Shear failure in beams

Shear failure occurs when the beam has shear resistance lower than flexural strength and the shear force exceeds the shear capacity of different materials of the beam. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force.
This type of failure is sudden and provides no warning i.e. brittle failure. The effective span to depth ratio of the beams and their size are important parameters in determining the type of shear failure. Shear failure is an undesired type of failure and commonly stirrups are placed in the beam to prevent the shear failure.

How to Calculate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter calculator uses Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Tensile Stress in Fork of Knuckle Joint, The Tensile stress in fork of knuckle joint given load, outer diameter of eye and pin diameter is the amount of tensile stress that is induced into the forked end of the knuckle joint when the knuckle joint is loaded into tension loading. Tensile Stress in Fork of Knuckle Joint is denoted by σ_tf symbol.

How to calculate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter using this online calculator? To use this online calculator for Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter, enter Load on Knuckle Joint (L), Thickess of Fork Eye of Knuckle Joint (a), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter calculation can be explained with given input values -> 2.2E-5 = 45000/(2*0.0266*(0.08-0.037)).

FAQ

What is Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

The Tensile stress in fork of knuckle joint given load, outer diameter of eye and pin diameter is the amount of tensile stress that is induced into the forked end of the knuckle joint when the knuckle joint is loaded into tension loading and is represented as σ_tf = L/(2*a*(d_o-d)) or Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

The Tensile stress in fork of knuckle joint given load, outer diameter of eye and pin diameter is the amount of tensile stress that is induced into the forked end of the knuckle joint when the knuckle joint is loaded into tension loading is calculated using Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). To calculate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter, you need Load on Knuckle Joint (L), Thickess of Fork Eye of Knuckle Joint (a), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Thickess of Fork Eye of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search