Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength Calculator

✖Tensile Yield Strength of Bolt is the stress the bolt can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.ⓘ Tensile Yield Strength of Bolt [σ_yt]			+10% -10%
✖Factor of Safety for Bolt expresses how much stronger a bolt or bolted joint system is than it needs to be for an intended load.ⓘ Factor of Safety For Bolt [f_s]			+10% -10%

✖Tensile Stress in Bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength [σ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Structural Response and Force Analysis Formulas PDF PDF Image

Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress in Bolt = Tensile Yield Strength of Bolt/Factor of Safety For Bolt
σ_t = σ_yt/f_s
This formula uses 3 Variables

Variables Used

Tensile Stress in Bolt - (Measured in Pascal) - Tensile Stress in Bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Tensile Yield Strength of Bolt - (Measured in Pascal) - Tensile Yield Strength of Bolt is the stress the bolt can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Factor of Safety For Bolt - Factor of Safety for Bolt expresses how much stronger a bolt or bolted joint system is than it needs to be for an intended load.

STEP 1: Convert Input(s) to Base Unit

Tensile Yield Strength of Bolt: 380 Newton per Square Millimeter --> 380000000 Pascal (Check conversion here)
Factor of Safety For Bolt: 2.62069 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = σ_yt/f_s --> 380000000/2.62069

Evaluating ... ...

σ_t = 144999980.921055

STEP 3: Convert Result to Output's Unit

144999980.921055 Pascal -->144.999980921055 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

144.999980921055 ≈ 145 Newton per Square Millimeter <-- Tensile Stress in Bolt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Threaded Fastener » Mechanical » Structural Response and Force Analysis » Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Structural Response and Force Analysis Calculators

Tensile Stress Area of Threaded fastener

LaTeX Go Tensile Stress Area of Threaded Fastener = pi/4*((Pitch Diameter of External Thread+Minor Diameter of External Thread)/2)^2

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter

LaTeX Go Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2)

Tensile Force acting on Bolt given Tensile Stress

LaTeX Go Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4

Tensile Yield Strength of Bolt

LaTeX Go Tensile Yield Strength of Bolt = Factor of Safety For Bolt*Tensile Stress in Bolt

Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength Formula

LaTeX Go

Tensile Stress in Bolt = Tensile Yield Strength of Bolt/Factor of Safety For Bolt
σ_t = σ_yt/f_s

What is a fastener?

A fastener or fastening is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.

How to Calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength?

Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength calculator uses Tensile Stress in Bolt = Tensile Yield Strength of Bolt/Factor of Safety For Bolt to calculate the Tensile Stress in Bolt, Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength is calculated by dividing the applied tensile force by the cross-sectional area of the core. The tensile yield strength of the material indicates the maximum stress the bolt can withstand before deforming plastically. To ensure the bolt operates safely, the tensile stress should not exceed the tensile yield strength. Tensile Stress in Bolt is denoted by σ_t symbol.

How to calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength using this online calculator? To use this online calculator for Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength, enter Tensile Yield Strength of Bolt (σ_yt) & Factor of Safety For Bolt (f_s) and hit the calculate button. Here is how the Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength calculation can be explained with given input values -> 0.000146 = 380000000/2.62069.

FAQ

What is Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength?

Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength is calculated by dividing the applied tensile force by the cross-sectional area of the core. The tensile yield strength of the material indicates the maximum stress the bolt can withstand before deforming plastically. To ensure the bolt operates safely, the tensile stress should not exceed the tensile yield strength and is represented as σ_t = σ_yt/f_s or Tensile Stress in Bolt = Tensile Yield Strength of Bolt/Factor of Safety For Bolt. Tensile Yield Strength of Bolt is the stress the bolt can withstand without permanent deformation or a point at which it will no longer return to its original dimensions & Factor of Safety for Bolt expresses how much stronger a bolt or bolted joint system is than it needs to be for an intended load.

How to calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength?

Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength is calculated by dividing the applied tensile force by the cross-sectional area of the core. The tensile yield strength of the material indicates the maximum stress the bolt can withstand before deforming plastically. To ensure the bolt operates safely, the tensile stress should not exceed the tensile yield strength is calculated using Tensile Stress in Bolt = Tensile Yield Strength of Bolt/Factor of Safety For Bolt. To calculate Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength, you need Tensile Yield Strength of Bolt (σ_yt) & Factor of Safety For Bolt (f_s). With our tool, you need to enter the respective value for Tensile Yield Strength of Bolt & Factor of Safety For Bolt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress in Bolt?

In this formula, Tensile Stress in Bolt uses Tensile Yield Strength of Bolt & Factor of Safety For Bolt. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2)

Home

FREE PDFs

🔍 Search