Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld Calculator

✖Tensile strength is the stress at the maximum on the engineering stress-strain curve.ⓘ Tensile Strength [TS]			+10% -10%
✖Area of double fillet weld is that area which is prepared by joining two metals for welding.ⓘ Area of Double Fillet Weld [A_double]			+10% -10%

✖Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.ⓘ Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld [σ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress = Tensile Strength/(Area of Double Fillet Weld)
σ_t = TS/(A_double)
This formula uses 3 Variables

Variables Used

Tensile Stress - (Measured in Pascal) - Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.
Tensile Strength - (Measured in Pascal) - Tensile strength is the stress at the maximum on the engineering stress-strain curve.
Area of Double Fillet Weld - (Measured in Square Meter) - Area of double fillet weld is that area which is prepared by joining two metals for welding.

STEP 1: Convert Input(s) to Base Unit

Tensile Strength: 35 Megapascal --> 35000000 Pascal (Check conversion here)
Area of Double Fillet Weld: 6400 Square Millimeter --> 0.0064 Square Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = TS/(A_double) --> 35000000/(0.0064)

Evaluating ... ...

σ_t = 5468750000

STEP 3: Convert Result to Output's Unit

5468750000 Pascal -->5468.75 Megapascal (Check conversion here)

FINAL ANSWER

5468.75 Megapascal <-- Tensile Stress

(Calculation completed in 00.021 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Mechanical » Stresses in Weld » Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Stresses in Weld Calculators

Tensile Force for Butt Weld Joint given Length of Weld

LaTeX Go Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld

Tensile Stress given Tensile Force for Butt Weld Joint

LaTeX Go Tensile Stress = Tensile Force in Butt Weld/Weld Bed Area

Area of Weld given Tensile Force for Butt Weld Joint

LaTeX Go Weld Bed Area = Tensile Force in Butt Weld/Tensile Stress

Tensile Force for Butt Weld Joint

LaTeX Go Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area

Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld Formula

LaTeX Go

Tensile Stress = Tensile Strength/(Area of Double Fillet Weld)
σ_t = TS/(A_double)

What do you mean by maximum shear stress theory?

The maximum shear stress theory states that the failure or yielding of a ductile material will occur when the maximum shear stress of the material equals or exceeds the shear stress value at the yield point in the uniaxial tensile test.

How to Calculate Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld?

Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld calculator uses Tensile Stress = Tensile Strength/(Area of Double Fillet Weld) to calculate the Tensile Stress, Tensile stress given tensile strength of double fillet lap and area of double fillet weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force. Tensile Stress is denoted by σ_t symbol.

How to calculate Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld using this online calculator? To use this online calculator for Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld, enter Tensile Strength (TS) & Area of Double Fillet Weld (A_double) and hit the calculate button. Here is how the Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld calculation can be explained with given input values -> 0.005469 = 35000000/(0.0064).

FAQ

What is Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld?

Tensile stress given tensile strength of double fillet lap and area of double fillet weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force and is represented as σ_t = TS/(A_double) or Tensile Stress = Tensile Strength/(Area of Double Fillet Weld). Tensile strength is the stress at the maximum on the engineering stress-strain curve & Area of double fillet weld is that area which is prepared by joining two metals for welding.

How to calculate Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld?

Tensile stress given tensile strength of double fillet lap and area of double fillet weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force is calculated using Tensile Stress = Tensile Strength/(Area of Double Fillet Weld). To calculate Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld, you need Tensile Strength (TS) & Area of Double Fillet Weld (A_double). With our tool, you need to enter the respective value for Tensile Strength & Area of Double Fillet Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress?

In this formula, Tensile Stress uses Tensile Strength & Area of Double Fillet Weld. We can use 3 other way(s) to calculate the same, which is/are as follows -

Tensile Stress = Tensile Force in Butt Weld/Weld Bed Area
Tensile Stress = Tensile Force in Butt Weld/(Length of Weld*Depth of Weld)
Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate)

Home

FREE PDFs

🔍 Search