Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts Calculator

✖The allowable bearing stress is the maximum bearing stress that can be applied to the structure such that it is safe against instability due to shear failure.ⓘ Allowable Bearing Stress [F_p]

+10%

-10%

✖The tensile strength of connected part is the maximum stress that a material can bear before breaking when it is allowed to be stretched or pulled.ⓘ Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts [F_u]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Load, Stress and Fasteners Formulas PDF PDF Image

Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Strength of connected part = Allowable Bearing Stress/1.35
F_u = F_p/1.35
This formula uses 2 Variables

Variables Used

Tensile Strength of connected part - (Measured in Pascal) - The tensile strength of connected part is the maximum stress that a material can bear before breaking when it is allowed to be stretched or pulled.
Allowable Bearing Stress - (Measured in Pascal) - The allowable bearing stress is the maximum bearing stress that can be applied to the structure such that it is safe against instability due to shear failure.

STEP 1: Convert Input(s) to Base Unit

Allowable Bearing Stress: 107 Megapascal --> 107000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_u = F_p/1.35 --> 107000000/1.35

Evaluating ... ...

F_u = 79259259.2592593

STEP 3: Convert Result to Output's Unit

79259259.2592593 Pascal -->79.2592592592593 Megapascal (Check conversion here)

FINAL ANSWER

79.2592592592593 ≈ 79.25926 Megapascal <-- Tensile Strength of connected part

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Bridge and Suspension Cable » Load, Stress and Fasteners » Bearing on Milled Surfaces and Bridge Fasteners » Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< Bearing on Milled Surfaces and Bridge Fasteners Calculators

Allowable Stress for Expansion Rollers and Rockers where Diameter is from 635 mm to 3175 mm

LaTeX Go Allowable Stress = ((Yield Strength of Steel-13)/20)*3*sqrt(Diameter of Roller or Rocker)

Diameter of Roller or Rocker for d from 635 to 3125mm

LaTeX Go Diameter of Roller or Rocker = (Allowable Stress/(((Yield Strength of Steel-13)/20)*3))^2

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm

LaTeX Go Allowable Stress = ((Yield Strength of Steel-13)/20)*0.6*Diameter of Roller or Rocker

Diameter of Roller or Rocker for d up to 635 mm

LaTeX Go Diameter of Roller or Rocker = Allowable Stress/(((Yield Strength of Steel)/20)*0.6)

Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts Formula

LaTeX Go

Tensile Strength of connected part = Allowable Bearing Stress/1.35
F_u = F_p/1.35

What is Tensile Strength of Bolts?

Tensile Strength of bolts is the maximum load in tension (pulling apart) which a material can withstand before breaking or fracturing, whereas yield Strength is the maximum load at which a material exhibits a specific permanent deformation.

What is Allowable Bearing Stress?

Allowable bearing stress is a value based on an arbitrary amount of deformation of a body subjected to a bearing pressure. The bearing stress criteria for aluminum alloys, if applied to heat-treated steel, would permit allowable stresses as much as 50 per cent greater than those used at present for steel.

How to Calculate Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts?

Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts calculator uses Tensile Strength of connected part = Allowable Bearing Stress/1.35 to calculate the Tensile Strength of connected part, The Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts formula is defined as the strength against failure in tension mode applied on bolts. Tensile Strength of connected part is denoted by F_u symbol.

How to calculate Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts using this online calculator? To use this online calculator for Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts, enter Allowable Bearing Stress (F_p) and hit the calculate button. Here is how the Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts calculation can be explained with given input values -> 7.9E-5 = 107000000/1.35.

FAQ

What is Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts?

The Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts formula is defined as the strength against failure in tension mode applied on bolts and is represented as F_u = F_p/1.35 or Tensile Strength of connected part = Allowable Bearing Stress/1.35. The allowable bearing stress is the maximum bearing stress that can be applied to the structure such that it is safe against instability due to shear failure.

How to calculate Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts?

The Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts formula is defined as the strength against failure in tension mode applied on bolts is calculated using Tensile Strength of connected part = Allowable Bearing Stress/1.35. To calculate Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts, you need Allowable Bearing Stress (F_p). With our tool, you need to enter the respective value for Allowable Bearing Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Strength of connected part?

In this formula, Tensile Strength of connected part uses Allowable Bearing Stress. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Strength of connected part = Allowable Bearing Stress/0.80

Home

FREE PDFs

🔍 Search