Tensile Force on Plates given Efficiency of Butt Welded Joint Calculator

✖Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.ⓘ Tensile Stress in Weld [σ_t]			+10% -10%
✖Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate.ⓘ Welded Base Plate Thickness [t_p]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.ⓘ Efficiency of Welded Joints [η]			+10% -10%

✖Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.ⓘ Tensile Force on Plates given Efficiency of Butt Welded Joint [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Butt Welds Formulas PDF PDF Image

Tensile Force on Plates given Efficiency of Butt Welded Joint Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints
P = σ_t*t_p*L*η
This formula uses 5 Variables

Variables Used

Tensile Force on Welded Plates - (Measured in Newton) - Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.
Tensile Stress in Weld - (Measured in Pascal) - Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.
Welded Base Plate Thickness - (Measured in Meter) - Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Efficiency of Welded Joints - The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.

STEP 1: Convert Input(s) to Base Unit

Tensile Stress in Weld: 56.4 Newton per Square Millimeter --> 56400000 Pascal (Check conversion here)
Welded Base Plate Thickness: 18 Millimeter --> 0.018 Meter (Check conversion here)
Length of Weld: 19.5 Millimeter --> 0.0195 Meter (Check conversion here)
Efficiency of Welded Joints: 0.833 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = σ_t*t_p*L*η --> 56400000*0.018*0.0195*0.833

Evaluating ... ...

P = 16490.4012

STEP 3: Convert Result to Output's Unit

16490.4012 Newton -->16.4904012 Kilonewton (Check conversion here)

FINAL ANSWER

16.4904012 ≈ 16.4904 Kilonewton <-- Tensile Force on Welded Plates

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Butt Welds » Tensile Force on Plates given Efficiency of Butt Welded Joint

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Butt Welds Calculators

Strength of Butt Welded Joint

LaTeX Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Beam Width for Nominal Shear*Length of Weld)

Throat of Butt Weld given Average Tensile Stress

LaTeX Go Throat Thickness of Weld = Tensile Force on Welded Plates/(Length of Weld*Tensile Stress in Weld)

Average Tensile Stress in Butt Weld

LaTeX Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)

Tensile Force on Plates given Average Tensile Stress in Butt Weld

LaTeX Go Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld

Tensile Force on Plates given Efficiency of Butt Welded Joint Formula

LaTeX Go

Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints
P = σ_t*t_p*L*η

Failure in Welded Joints

For a welded joint in tension, failure may occur majorly in two ways
1. When Joint efficiency is greater than 1 - The Tensile Yield Strength of the Base Plate is lesser than that of the weld, and failure occurs due to yielding in the plate.
2. When Joint efficiency is smaller than 1 - The Tensile Yield Strength of the Weld Beads is lesser than that of the Base Plate, and failure occurs due to yielding at the joint.

How to Calculate Tensile Force on Plates given Efficiency of Butt Welded Joint?

Tensile Force on Plates given Efficiency of Butt Welded Joint calculator uses Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints to calculate the Tensile Force on Welded Plates, Tensile Force on Plates given Efficiency of Butt Welded Joint gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known. Tensile Force on Welded Plates is denoted by P symbol.

How to calculate Tensile Force on Plates given Efficiency of Butt Welded Joint using this online calculator? To use this online calculator for Tensile Force on Plates given Efficiency of Butt Welded Joint, enter Tensile Stress in Weld (σ_t), Welded Base Plate Thickness (t_p), Length of Weld (L) & Efficiency of Welded Joints (η) and hit the calculate button. Here is how the Tensile Force on Plates given Efficiency of Butt Welded Joint calculation can be explained with given input values -> 0.01649 = 56400000*0.018*0.0195*0.833.

FAQ

What is Tensile Force on Plates given Efficiency of Butt Welded Joint?

Tensile Force on Plates given Efficiency of Butt Welded Joint gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known and is represented as P = σ_t*t_p*L*η or Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints. Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension, Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate, The Length of Weld is the linear distance of the welding segment joined by the welded joint & The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.

How to calculate Tensile Force on Plates given Efficiency of Butt Welded Joint?

Tensile Force on Plates given Efficiency of Butt Welded Joint gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known is calculated using Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints. To calculate Tensile Force on Plates given Efficiency of Butt Welded Joint, you need Tensile Stress in Weld (σ_t), Welded Base Plate Thickness (t_p), Length of Weld (L) & Efficiency of Welded Joints (η). With our tool, you need to enter the respective value for Tensile Stress in Weld, Welded Base Plate Thickness, Length of Weld & Efficiency of Welded Joints and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Force on Welded Plates?

In this formula, Tensile Force on Welded Plates uses Tensile Stress in Weld, Welded Base Plate Thickness, Length of Weld & Efficiency of Welded Joints. We can use 2 other way(s) to calculate the same, which is/are as follows -

Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld
Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld

Home

FREE PDFs

🔍 Search