Tensile Force on Parallel Fillet Weld Plate given Shear Stress Calculator

✖Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress in Parallel Fillet Weld [𝜏]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld [h_l]			+10% -10%

✖Load on Parallel Fillet Weld is the force, or the load applied perpendicular to the specimen cross-section.ⓘ Tensile Force on Parallel Fillet Weld Plate given Shear Stress [P_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parallel Fillet Welds Formulas PDF PDF Image

Tensile Force on Parallel Fillet Weld Plate given Shear Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld*0.707
P_f = 𝜏*L*h_l*0.707
This formula uses 4 Variables

Variables Used

Load on Parallel Fillet Weld - (Measured in Newton) - Load on Parallel Fillet Weld is the force, or the load applied perpendicular to the specimen cross-section.
Shear Stress in Parallel Fillet Weld - (Measured in Pascal) - Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.

STEP 1: Convert Input(s) to Base Unit

Shear Stress in Parallel Fillet Weld: 38 Newton per Square Millimeter --> 38000000 Pascal (Check conversion here)
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_f = 𝜏*L*h_l*0.707 --> 38000000*0.195*0.0212*0.707

Evaluating ... ...

P_f = 111064.044

STEP 3: Convert Result to Output's Unit

111064.044 Newton --> No Conversion Required

FINAL ANSWER

111064.044 ≈ 111064 Newton <-- Load on Parallel Fillet Weld

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Parallel Fillet Welds » Tensile Force on Parallel Fillet Weld Plate given Shear Stress

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Parallel Fillet Welds Calculators

Shear Stress in Double Parallel Fillet Weld

LaTeX Go Shear Stress in Double Parallel Fillet Weld = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

LaTeX Go Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Leg of Parallel Fillet Weld given Throat of Weld

LaTeX Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)

Throat of Parallel Fillet Weld

LaTeX Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

Tensile Force on Parallel Fillet Weld Plate given Shear Stress Formula

LaTeX Go

Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld*0.707
P_f = 𝜏*L*h_l*0.707

How does Tensile Force in Plate result in Shear in Weld?

The Tensile Force on plates acts parallel to the Length of the Weld i.e. along the face of the Fillet Weld. This causes shear on the Beads as the material tends to move perpendicular to the Leg of Weld, thus inducing Shear Stress.

How to Calculate Tensile Force on Parallel Fillet Weld Plate given Shear Stress?

Tensile Force on Parallel Fillet Weld Plate given Shear Stress calculator uses Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld*0.707 to calculate the Load on Parallel Fillet Weld, Tensile Force on Parallel Fillet Weld Plate given Shear Stress is the load and the force on the plates that the Weld can withstand in without failure. Load on Parallel Fillet Weld is denoted by P_f symbol.

How to calculate Tensile Force on Parallel Fillet Weld Plate given Shear Stress using this online calculator? To use this online calculator for Tensile Force on Parallel Fillet Weld Plate given Shear Stress, enter Shear Stress in Parallel Fillet Weld (𝜏), Length of Weld (L) & Leg of Weld (h_l) and hit the calculate button. Here is how the Tensile Force on Parallel Fillet Weld Plate given Shear Stress calculation can be explained with given input values -> 111064 = 38000000*0.195*0.0212*0.707.

FAQ

What is Tensile Force on Parallel Fillet Weld Plate given Shear Stress?

Tensile Force on Parallel Fillet Weld Plate given Shear Stress is the load and the force on the plates that the Weld can withstand in without failure and is represented as P_f = 𝜏*L*h_l*0.707 or Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld*0.707. Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress, The Length of Weld is the linear distance of the welding segment joined by the welded joint & The Leg of Weld is the distance from the joint root to the toe of the weld.

How to calculate Tensile Force on Parallel Fillet Weld Plate given Shear Stress?

Tensile Force on Parallel Fillet Weld Plate given Shear Stress is the load and the force on the plates that the Weld can withstand in without failure is calculated using Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld*0.707. To calculate Tensile Force on Parallel Fillet Weld Plate given Shear Stress, you need Shear Stress in Parallel Fillet Weld (𝜏), Length of Weld (L) & Leg of Weld (h_l). With our tool, you need to enter the respective value for Shear Stress in Parallel Fillet Weld, Length of Weld & Leg of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Load on Parallel Fillet Weld?

In this formula, Load on Parallel Fillet Weld uses Shear Stress in Parallel Fillet Weld, Length of Weld & Leg of Weld. We can use 1 other way(s) to calculate the same, which is/are as follows -

Load on Parallel Fillet Weld = Shear Stress in Parallel Fillet Weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))

Home

FREE PDFs

🔍 Search