Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld Calculator

✖Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.ⓘ Tensile Stress in Transverse Fillet Weld [σ_t]			+10% -10%
✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld [h_l]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%

✖Load on transverse fillet weld is the force or the load applied perpendicular to the specimen cross-section.ⓘ Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld [P_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transverse Fillet Weld Formulas PDF PDF Image

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld
P_t = σ_t*0.707*h_l*L
This formula uses 4 Variables

Variables Used

Load on Transverse Fillet Weld - (Measured in Newton) - Load on transverse fillet weld is the force or the load applied perpendicular to the specimen cross-section.
Tensile Stress in Transverse Fillet Weld - (Measured in Pascal) - Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.

STEP 1: Convert Input(s) to Base Unit

Tensile Stress in Transverse Fillet Weld: 56.4 Newton per Square Millimeter --> 56400000 Pascal (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_t = σ_t*0.707*h_l*L --> 56400000*0.707*0.0212*0.195

Evaluating ... ...

P_t = 164842.4232

STEP 3: Convert Result to Output's Unit

164842.4232 Newton -->164.8424232 Kilonewton (Check conversion here)

FINAL ANSWER

164.8424232 ≈ 164.8424 Kilonewton <-- Load on Transverse Fillet Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Transverse Fillet Weld » Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Transverse Fillet Weld Calculators

Thickness of Plate given Tensile Stress in Transverse Fillet Weld

LaTeX Go Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)

Tensile Stress in Transverse Fillet Weld

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

LaTeX Go Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld

Permissible Tensile Strength for Double Transverse Fillet Joint

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld)

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld Formula

LaTeX Go

Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld
P_t = σ_t*0.707*h_l*L

what is tensile stress?

Tensile means the material is under tension and that there are forces acting on it trying to stretch the material. Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

How to Calculate Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld?

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld calculator uses Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld to calculate the Load on Transverse Fillet Weld, Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld is the stretching force acting on plates. Load on Transverse Fillet Weld is denoted by P_t symbol.

How to calculate Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld using this online calculator? To use this online calculator for Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld, enter Tensile Stress in Transverse Fillet Weld (σ_t), Leg of Weld (h_l) & Length of Weld (L) and hit the calculate button. Here is how the Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld calculation can be explained with given input values -> 0.164842 = 56400000*0.707*0.0212*0.195.

FAQ

What is Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld?

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld is the stretching force acting on plates and is represented as P_t = σ_t*0.707*h_l*L or Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld. Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area, The Leg of Weld is the distance from the joint root to the toe of the weld & The Length of Weld is the linear distance of the welding segment joined by the welded joint.

How to calculate Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld?

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld is the stretching force acting on plates is calculated using Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld. To calculate Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld, you need Tensile Stress in Transverse Fillet Weld (σ_t), Leg of Weld (h_l) & Length of Weld (L). With our tool, you need to enter the respective value for Tensile Stress in Transverse Fillet Weld, Leg of Weld & Length of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search