Tensile Force acting on Bolt given Tensile Stress Calculator

✖Tensile Stress in Bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Tensile Stress in Bolt [σ_t]			+10% -10%
✖Core Diameter of Threaded Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.ⓘ Core Diameter of Threaded Bolt [d_c']			+10% -10%

✖The Tensile Force on Bolt is the magnitude of the force applied along the bolt axis trying to stretch the bolt.ⓘ Tensile Force acting on Bolt given Tensile Stress [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Structural Response and Force Analysis Formulas PDF PDF Image

Tensile Force acting on Bolt given Tensile Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4
P = σ_t*pi*(d_c'^2)/4
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Tensile Force on Bolt - (Measured in Newton) - The Tensile Force on Bolt is the magnitude of the force applied along the bolt axis trying to stretch the bolt.
Tensile Stress in Bolt - (Measured in Pascal) - Tensile Stress in Bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Core Diameter of Threaded Bolt - (Measured in Meter) - Core Diameter of Threaded Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.

STEP 1: Convert Input(s) to Base Unit

Tensile Stress in Bolt: 145 Newton per Square Millimeter --> 145000000 Pascal (Check conversion here)
Core Diameter of Threaded Bolt: 8.5 Millimeter --> 0.0085 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = σ_t*pi*(d_c'^2)/4 --> 145000000*pi*(0.0085^2)/4

Evaluating ... ...

P = 8228.02750929252

STEP 3: Convert Result to Output's Unit

8228.02750929252 Newton --> No Conversion Required

FINAL ANSWER

8228.02750929252 ≈ 8228.028 Newton <-- Tensile Force on Bolt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Threaded Fastener » Mechanical » Structural Response and Force Analysis » Tensile Force acting on Bolt given Tensile Stress

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Structural Response and Force Analysis Calculators

Tensile Stress Area of Threaded fastener

LaTeX Go Tensile Stress Area of Threaded Fastener = pi/4*((Pitch Diameter of External Thread+Minor Diameter of External Thread)/2)^2

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter

LaTeX Go Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2)

Tensile Force acting on Bolt given Tensile Stress

LaTeX Go Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4

Tensile Yield Strength of Bolt

LaTeX Go Tensile Yield Strength of Bolt = Factor of Safety For Bolt*Tensile Stress in Bolt

Tensile Force acting on Bolt given Tensile Stress Formula

LaTeX Go

Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4
P = σ_t*pi*(d_c'^2)/4

What is a fastener?

A fastener or fastening is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.

How to Calculate Tensile Force acting on Bolt given Tensile Stress?

Tensile Force acting on Bolt given Tensile Stress calculator uses Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4 to calculate the Tensile Force on Bolt, The Tensile Force acting on Bolt given Tensile Stress formula refers to a force that attempts to pull apart or stretch a bolt. Tensile Force on Bolt is denoted by P symbol.

How to calculate Tensile Force acting on Bolt given Tensile Stress using this online calculator? To use this online calculator for Tensile Force acting on Bolt given Tensile Stress, enter Tensile Stress in Bolt (σ_t) & Core Diameter of Threaded Bolt (d_c') and hit the calculate button. Here is how the Tensile Force acting on Bolt given Tensile Stress calculation can be explained with given input values -> 8228.028 = 145000000*pi*(0.0085^2)/4.

FAQ

What is Tensile Force acting on Bolt given Tensile Stress?

The Tensile Force acting on Bolt given Tensile Stress formula refers to a force that attempts to pull apart or stretch a bolt and is represented as P = σ_t*pi*(d_c'^2)/4 or Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4. Tensile Stress in Bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force & Core Diameter of Threaded Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.

How to calculate Tensile Force acting on Bolt given Tensile Stress?

The Tensile Force acting on Bolt given Tensile Stress formula refers to a force that attempts to pull apart or stretch a bolt is calculated using Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4. To calculate Tensile Force acting on Bolt given Tensile Stress, you need Tensile Stress in Bolt (σ_t) & Core Diameter of Threaded Bolt (d_c'). With our tool, you need to enter the respective value for Tensile Stress in Bolt & Core Diameter of Threaded Bolt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Force on Bolt?

In this formula, Tensile Force on Bolt uses Tensile Stress in Bolt & Core Diameter of Threaded Bolt. We can use 2 other way(s) to calculate the same, which is/are as follows -

Tensile Force on Bolt = (pi*Shear Stress in Bolt*Core Diameter of Threaded Bolt*Height of Nut)
Tensile Force on Bolt = (pi*Shear Stress in Bolt*Core Diameter of Threaded Bolt*Height of Nut)

Home

FREE PDFs

🔍 Search