Thickness of Cylinder Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickness of Cylinder = 1/(2*pi)*sqrt((Specific Resistance*10^9)/(Relative Permeability*Frequency of Induction Furnace))
tc = 1/(2*pi)*sqrt((ρ*10^9)/(μr*ffurnace))
This formula uses 1 Constants, 1 Functions, 4 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Thickness of Cylinder - (Measured in Meter) - Thickness Of Cylinder is the length of the cylinder used.
Specific Resistance - (Measured in Ohm Meter) - Specific resistance is also known as resisitivity. The resistivity of a material is the resistance of a wire of that material of unit length and unit area of cross-section.
Relative Permeability - Relative permeability is the permittivity of a material expressed as a ratio with the electric permittivity of a vacuum.
Frequency of Induction Furnace - (Measured in Hertz) - Frequency of induction furnace is the operating frequency of coreless induction furnace.
STEP 1: Convert Input(s) to Base Unit
Specific Resistance: 113.59 Microhm Centimeter --> 1.1359E-06 Ohm Meter (Check conversion ​here)
Relative Permeability: 0.9 --> No Conversion Required
Frequency of Induction Furnace: 2.84 Kilohertz --> 2840 Hertz (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tc = 1/(2*pi)*sqrt((ρ*10^9)/(μr*ffurnace)) --> 1/(2*pi)*sqrt((1.1359E-06*10^9)/(0.9*2840))
Evaluating ... ...
tc = 0.106098625252409
STEP 3: Convert Result to Output's Unit
0.106098625252409 Meter -->10.6098625252409 Centimeter (Check conversion ​here)
FINAL ANSWER
10.6098625252409 10.60986 Centimeter <-- Thickness of Cylinder
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Nisarg
Indian Institute of Technology,Roorlee (IITR), Roorkee
Nisarg has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Parminder Singh
Chandigarh University (CU), Punjab
Parminder Singh has verified this Calculator and 500+ more calculators!

Furnace Heating Calculators

Heat Conduction
​ LaTeX ​ Go Heat Conduction = (Thermal Conductivity*Area of Furnace*Total Time*(Temperature of Wall 1-Temperature of Wall 2))/Thickness of Wall
Energy Required by Furnace to Melt Steel
​ LaTeX ​ Go Energy = (Mass*Specific Heat*(Temperature of Wall 2-Temperature of Wall 1))+(Mass*Latent Heat)
Heat Radiation
​ LaTeX ​ Go Heat Radiation = 5.72*Emissivity*Radiating Efficiency*((Temperature of Wall 1/100)^4-(Temperature of Wall 2/100)^4)
Energy Efficiency
​ LaTeX ​ Go Energy Efficiency = Theoretical Energy/Actual Energy

Thickness of Cylinder Formula

​LaTeX ​Go
Thickness of Cylinder = 1/(2*pi)*sqrt((Specific Resistance*10^9)/(Relative Permeability*Frequency of Induction Furnace))
tc = 1/(2*pi)*sqrt((ρ*10^9)/(μr*ffurnace))

What is permeability?

Permeability is the measure of magnetization that a material obtains in response to an applied magnetic field.

How to Calculate Thickness of Cylinder?

Thickness of Cylinder calculator uses Thickness of Cylinder = 1/(2*pi)*sqrt((Specific Resistance*10^9)/(Relative Permeability*Frequency of Induction Furnace)) to calculate the Thickness of Cylinder, The Thickness of cylinder formula is defined as the thickness of the cylindrical layer used in the middle of the crucible. Thickness of Cylinder is denoted by tc symbol.

How to calculate Thickness of Cylinder using this online calculator? To use this online calculator for Thickness of Cylinder, enter Specific Resistance (ρ), Relative Permeability r) & Frequency of Induction Furnace (ffurnace) and hit the calculate button. Here is how the Thickness of Cylinder calculation can be explained with given input values -> 1060.986 = 1/(2*pi)*sqrt((1.1359E-06*10^9)/(0.9*2840)).

FAQ

What is Thickness of Cylinder?
The Thickness of cylinder formula is defined as the thickness of the cylindrical layer used in the middle of the crucible and is represented as tc = 1/(2*pi)*sqrt((ρ*10^9)/(μr*ffurnace)) or Thickness of Cylinder = 1/(2*pi)*sqrt((Specific Resistance*10^9)/(Relative Permeability*Frequency of Induction Furnace)). Specific resistance is also known as resisitivity. The resistivity of a material is the resistance of a wire of that material of unit length and unit area of cross-section, Relative permeability is the permittivity of a material expressed as a ratio with the electric permittivity of a vacuum & Frequency of induction furnace is the operating frequency of coreless induction furnace.
How to calculate Thickness of Cylinder?
The Thickness of cylinder formula is defined as the thickness of the cylindrical layer used in the middle of the crucible is calculated using Thickness of Cylinder = 1/(2*pi)*sqrt((Specific Resistance*10^9)/(Relative Permeability*Frequency of Induction Furnace)). To calculate Thickness of Cylinder, you need Specific Resistance (ρ), Relative Permeability r) & Frequency of Induction Furnace (ffurnace). With our tool, you need to enter the respective value for Specific Resistance, Relative Permeability & Frequency of Induction Furnace and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!