Thickness given Proof Load in Quarter Elliptical Spring Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickness of Section = ((6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Deflection of Spring*Width of Cross Section))^(1/3)
t = ((6*WO (Elliptical Spring)*L^3)/(E*n*δ*b))^(1/3)
This formula uses 7 Variables
Variables Used
Thickness of Section - (Measured in Meter) - Thickness of Section is the dimension through an object, as opposed to length or width.
Proof Load on Elliptical Spring - (Measured in Newton) - Proof Load on Elliptical Spring is the maximum tensile force that can be applied to a spring that will not result in plastic deformation.
Length in Spring - (Measured in Meter) - Length in Spring is the measurement or extent of something from end to end.
Young's Modulus - (Measured in Pascal) - Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.
Number of Plates - Number of Plates is the count of plates in the leaf spring.
Deflection of Spring - (Measured in Meter) - Deflection of Spring is how a spring responds when force is applied or released.
Width of Cross Section - (Measured in Meter) - Width of Cross Section is the geometric measurement or extent of the member from side to side.
STEP 1: Convert Input(s) to Base Unit
Proof Load on Elliptical Spring: 37 Kilonewton --> 37000 Newton (Check conversion ​here)
Length in Spring: 4170 Millimeter --> 4.17 Meter (Check conversion ​here)
Young's Modulus: 20000 Megapascal --> 20000000000 Pascal (Check conversion ​here)
Number of Plates: 8 --> No Conversion Required
Deflection of Spring: 3.4 Millimeter --> 0.0034 Meter (Check conversion ​here)
Width of Cross Section: 300 Millimeter --> 0.3 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
t = ((6*WO (Elliptical Spring)*L^3)/(E*n*δ*b))^(1/3) --> ((6*37000*4.17^3)/(20000000000*8*0.0034*0.3))^(1/3)
Evaluating ... ...
t = 0.462040801251556
STEP 3: Convert Result to Output's Unit
0.462040801251556 Meter -->462.040801251556 Millimeter (Check conversion ​here)
FINAL ANSWER
462.040801251556 462.0408 Millimeter <-- Thickness of Section
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Quarter Elliptical Springs Calculators

Thickness given Proof Load in Quarter Elliptical Spring
​ LaTeX ​ Go Thickness of Section = ((6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Deflection of Spring*Width of Cross Section))^(1/3)
Number of Plates given Proof Load in Quarter Elliptical Spring
​ LaTeX ​ Go Number of Plates = (6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Width of Cross Section*Thickness of Section^3*Deflection of Spring)
Width given Proof Load in Quarter Elliptical Spring
​ LaTeX ​ Go Width of Cross Section = (6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Thickness of Section^3*Deflection of Spring)
Proof Load in Quarter Elliptical Spring
​ LaTeX ​ Go Proof Load on Elliptical Spring = (Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3*Deflection of Spring)/(6*Length in Spring^3)

Thickness given Proof Load in Quarter Elliptical Spring Formula

​LaTeX ​Go
Thickness of Section = ((6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Deflection of Spring*Width of Cross Section))^(1/3)
t = ((6*WO (Elliptical Spring)*L^3)/(E*n*δ*b))^(1/3)

What is Quarter Elliptical Spring?

This is an older type of spring with a similar structure to that of a normal leaf spring, only different being that it is half.

How to Calculate Thickness given Proof Load in Quarter Elliptical Spring?

Thickness given Proof Load in Quarter Elliptical Spring calculator uses Thickness of Section = ((6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Deflection of Spring*Width of Cross Section))^(1/3) to calculate the Thickness of Section, The Thickness given Proof Load in Quarter Elliptical Spring formula is defined as the thickness of the cross-section of one plate of the spring assembly. Thickness of Section is denoted by t symbol.

How to calculate Thickness given Proof Load in Quarter Elliptical Spring using this online calculator? To use this online calculator for Thickness given Proof Load in Quarter Elliptical Spring, enter Proof Load on Elliptical Spring (WO (Elliptical Spring)), Length in Spring (L), Young's Modulus (E), Number of Plates (n), Deflection of Spring (δ) & Width of Cross Section (b) and hit the calculate button. Here is how the Thickness given Proof Load in Quarter Elliptical Spring calculation can be explained with given input values -> 462040.8 = ((6*37000*4.17^3)/(20000000000*8*0.0034*0.3))^(1/3).

FAQ

What is Thickness given Proof Load in Quarter Elliptical Spring?
The Thickness given Proof Load in Quarter Elliptical Spring formula is defined as the thickness of the cross-section of one plate of the spring assembly and is represented as t = ((6*WO (Elliptical Spring)*L^3)/(E*n*δ*b))^(1/3) or Thickness of Section = ((6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Deflection of Spring*Width of Cross Section))^(1/3). Proof Load on Elliptical Spring is the maximum tensile force that can be applied to a spring that will not result in plastic deformation, Length in Spring is the measurement or extent of something from end to end, Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain, Number of Plates is the count of plates in the leaf spring, Deflection of Spring is how a spring responds when force is applied or released & Width of Cross Section is the geometric measurement or extent of the member from side to side.
How to calculate Thickness given Proof Load in Quarter Elliptical Spring?
The Thickness given Proof Load in Quarter Elliptical Spring formula is defined as the thickness of the cross-section of one plate of the spring assembly is calculated using Thickness of Section = ((6*Proof Load on Elliptical Spring*Length in Spring^3)/(Young's Modulus*Number of Plates*Deflection of Spring*Width of Cross Section))^(1/3). To calculate Thickness given Proof Load in Quarter Elliptical Spring, you need Proof Load on Elliptical Spring (WO (Elliptical Spring)), Length in Spring (L), Young's Modulus (E), Number of Plates (n), Deflection of Spring (δ) & Width of Cross Section (b). With our tool, you need to enter the respective value for Proof Load on Elliptical Spring, Length in Spring, Young's Modulus, Number of Plates, Deflection of Spring & Width of Cross Section and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!