Taylor's Tool Life given Cutting Velocity and Taylor's Intercept Calculator

✖Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.ⓘ Taylor's Constant [C]			+10% -10%
✖Cutting Velocity is the velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cutting Velocity [V]			+10% -10%
✖Feed Rate is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed Rate [f]			+10% -10%
✖Taylor's Exponent for Feed Rate in Taylors Theory is an experimental exponent used to draw a relation between feed rate to workpiece and tool life.ⓘ Taylor's Exponent for Feed Rate in Taylors Theory [a]			+10% -10%
✖Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.ⓘ Depth of Cut [d]			+10% -10%
✖Taylor's Exponent for Depth of Cut is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.ⓘ Taylor's Exponent for Depth of Cut [b]			+10% -10%
✖Taylor Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.ⓘ Taylor Tool Life Exponent [y]			+10% -10%

✖Tool Life in Taylors Theory is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.ⓘ Taylor's Tool Life given Cutting Velocity and Taylor's Intercept [L]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Taylor's Theory Formulas PDF PDF Image

Taylor's Tool Life given Cutting Velocity and Taylor's Intercept Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tool Life in Taylors Theory = (Taylor's Constant/(Cutting Velocity*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)))^(1/Taylor Tool Life Exponent)
L = (C/(V*(f^a)*(d^b)))^(1/y)
This formula uses 8 Variables

Variables Used

Tool Life in Taylors Theory - (Measured in Second) - Tool Life in Taylors Theory is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.
Taylor's Constant - Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.
Cutting Velocity - (Measured in Meter per Second) - Cutting Velocity is the velocity at the periphery of the cutter or workpiece (whichever is rotating).
Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.
Taylor's Exponent for Feed Rate in Taylors Theory - Taylor's Exponent for Feed Rate in Taylors Theory is an experimental exponent used to draw a relation between feed rate to workpiece and tool life.
Depth of Cut - (Measured in Meter) - Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.
Taylor's Exponent for Depth of Cut - Taylor's Exponent for Depth of Cut is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.
Taylor Tool Life Exponent - Taylor Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.

STEP 1: Convert Input(s) to Base Unit

Taylor's Constant: 85.13059 --> No Conversion Required
Cutting Velocity: 0.833333 Meter per Second --> 0.833333 Meter per Second No Conversion Required
Feed Rate: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Taylor's Exponent for Feed Rate in Taylors Theory: 0.2 --> No Conversion Required
Depth of Cut: 0.013 Meter --> 0.013 Meter No Conversion Required
Taylor's Exponent for Depth of Cut: 0.24 --> No Conversion Required
Taylor Tool Life Exponent: 0.8466244 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = (C/(V*(f^a)*(d^b)))^(1/y) --> (85.13059/(0.833333*(0.0007^0.2)*(0.013^0.24)))^(1/0.8466244)

Evaluating ... ...

L = 4500.02690031949

STEP 3: Convert Result to Output's Unit

4500.02690031949 Second -->1.25000747231097 Hour (Check conversion here)

FINAL ANSWER

1.25000747231097 ≈ 1.250007 Hour <-- Tool Life in Taylors Theory

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Tool Life and Tool Wear » Taylor's Theory » Taylor's Tool Life given Cutting Velocity and Taylor's Intercept

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Taylor's Theory Calculators

Taylor's Tool Life Exponent using Cutting Velocity and Taylor's Tool Life

LaTeX Go Taylor Tool Life Exponent = ln(Taylor's Constant/(Cutting Velocity*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)))/ln(Tool Life in Taylors Theory)

Taylor's Intercept given Cutting Velocity and Tool Life

LaTeX Go Taylor's Constant = Cutting Velocity*(Tool Life in Taylors Theory^Taylor Tool Life Exponent)*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)

Taylor's Exponent if Ratios of Cutting Velocities, Tool Lives are given in Two Machining Conditions

LaTeX Go Taylor Tool Life Exponent = (-1)*ln(Ratio of Cutting Velocities)/ln(Ratio of Tool Lives)

Taylor's Tool Life given Cutting Velocity and Intercept

LaTeX Go Taylor's Tool Life = (Taylor's Constant/Cutting Velocity)^(1/Taylor Tool Life Exponent)

Taylor's Tool Life given Cutting Velocity and Taylor's Intercept Formula

LaTeX Go

Modified Taylor's Tool Life Equation

The modified Taylor's Tool Life equation is given as:
VTⁿf^ad^b=C
where V= Cutting Velocity, T= Tool Life, f= Feed Rate, d= Depth of Cut, and n,a,b,C are Taylor's experimental constants.

How to Calculate Taylor's Tool Life given Cutting Velocity and Taylor's Intercept?

Taylor's Tool Life given Cutting Velocity and Taylor's Intercept calculator uses Tool Life in Taylors Theory = (Taylor's Constant/(Cutting Velocity*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)))^(1/Taylor Tool Life Exponent) to calculate the Tool Life in Taylors Theory, The Taylor's Tool Life given Cutting Velocity and Taylor's Intercept is a theoretical method to predict the approximate time period required between sharpening of Tool when it is used to the machine at a constant speed, feed, and depth of cut. Tool Life in Taylors Theory is denoted by L symbol.

How to calculate Taylor's Tool Life given Cutting Velocity and Taylor's Intercept using this online calculator? To use this online calculator for Taylor's Tool Life given Cutting Velocity and Taylor's Intercept, enter Taylor's Constant (C), Cutting Velocity (V), Feed Rate (f), Taylor's Exponent for Feed Rate in Taylors Theory (a), Depth of Cut (d), Taylor's Exponent for Depth of Cut (b) & Taylor Tool Life Exponent (y) and hit the calculate button. Here is how the Taylor's Tool Life given Cutting Velocity and Taylor's Intercept calculation can be explained with given input values -> 0.000347 = (85.13059/(0.833333*(0.0007^0.2)*(0.013^0.24)))^(1/0.8466244).

FAQ

What is Taylor's Tool Life given Cutting Velocity and Taylor's Intercept?

The Taylor's Tool Life given Cutting Velocity and Taylor's Intercept is a theoretical method to predict the approximate time period required between sharpening of Tool when it is used to the machine at a constant speed, feed, and depth of cut and is represented as L = (C/(V*(f^a)*(d^b)))^(1/y) or Tool Life in Taylors Theory = (Taylor's Constant/(Cutting Velocity*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)))^(1/Taylor Tool Life Exponent). Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment, Cutting Velocity is the velocity at the periphery of the cutter or workpiece (whichever is rotating), Feed Rate is defined as the tool's distance travelled during one spindle revolution, Taylor's Exponent for Feed Rate in Taylors Theory is an experimental exponent used to draw a relation between feed rate to workpiece and tool life, Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction, Taylor's Exponent for Depth of Cut is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life & Taylor Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.

How to calculate Taylor's Tool Life given Cutting Velocity and Taylor's Intercept?

The Taylor's Tool Life given Cutting Velocity and Taylor's Intercept is a theoretical method to predict the approximate time period required between sharpening of Tool when it is used to the machine at a constant speed, feed, and depth of cut is calculated using Tool Life in Taylors Theory = (Taylor's Constant/(Cutting Velocity*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)))^(1/Taylor Tool Life Exponent). To calculate Taylor's Tool Life given Cutting Velocity and Taylor's Intercept, you need Taylor's Constant (C), Cutting Velocity (V), Feed Rate (f), Taylor's Exponent for Feed Rate in Taylors Theory (a), Depth of Cut (d), Taylor's Exponent for Depth of Cut (b) & Taylor Tool Life Exponent (y). With our tool, you need to enter the respective value for Taylor's Constant, Cutting Velocity, Feed Rate, Taylor's Exponent for Feed Rate in Taylors Theory, Depth of Cut, Taylor's Exponent for Depth of Cut & Taylor Tool Life Exponent and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search