Taylor's Intercept given Cutting Velocity and Tool Life Calculator

✖Cutting Velocity is the velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cutting Velocity [V]			+10% -10%
✖Tool Life in Taylors Theory is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.ⓘ Tool Life in Taylors Theory [L]			+10% -10%
✖Taylor Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.ⓘ Taylor Tool Life Exponent [y]			+10% -10%
✖Feed Rate is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed Rate [f]			+10% -10%
✖Taylor's Exponent for Feed Rate in Taylors Theory is an experimental exponent used to draw a relation between feed rate to workpiece and tool life.ⓘ Taylor's Exponent for Feed Rate in Taylors Theory [a]			+10% -10%
✖Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.ⓘ Depth of Cut [d]			+10% -10%
✖Taylor's Exponent for Depth of Cut is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.ⓘ Taylor's Exponent for Depth of Cut [b]			+10% -10%

✖Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.ⓘ Taylor's Intercept given Cutting Velocity and Tool Life [C]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Taylor's Theory Formulas PDF PDF Image

Taylor's Intercept given Cutting Velocity and Tool Life Solution

STEP 0: Pre-Calculation Summary

Formula Used

Taylor's Constant = Cutting Velocity*(Tool Life in Taylors Theory^Taylor Tool Life Exponent)*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)
C = V*(L^y)*(f^a)*(d^b)
This formula uses 8 Variables

Variables Used

Taylor's Constant - Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.
Cutting Velocity - (Measured in Meter per Second) - Cutting Velocity is the velocity at the periphery of the cutter or workpiece (whichever is rotating).
Tool Life in Taylors Theory - (Measured in Second) - Tool Life in Taylors Theory is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.
Taylor Tool Life Exponent - Taylor Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.
Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.
Taylor's Exponent for Feed Rate in Taylors Theory - Taylor's Exponent for Feed Rate in Taylors Theory is an experimental exponent used to draw a relation between feed rate to workpiece and tool life.
Depth of Cut - (Measured in Meter) - Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.
Taylor's Exponent for Depth of Cut - Taylor's Exponent for Depth of Cut is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.

STEP 1: Convert Input(s) to Base Unit

Cutting Velocity: 0.833333 Meter per Second --> 0.833333 Meter per Second No Conversion Required
Tool Life in Taylors Theory: 1.18 Hour --> 4248 Second (Check conversion here)
Taylor Tool Life Exponent: 0.8466244 --> No Conversion Required
Feed Rate: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Taylor's Exponent for Feed Rate in Taylors Theory: 0.2 --> No Conversion Required
Depth of Cut: 0.013 Meter --> 0.013 Meter No Conversion Required
Taylor's Exponent for Depth of Cut: 0.24 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = V*(L^y)*(f^a)*(d^b) --> 0.833333*(4248^0.8466244)*(0.0007^0.2)*(0.013^0.24)

Evaluating ... ...

C = 81.0763380890551

STEP 3: Convert Result to Output's Unit

81.0763380890551 --> No Conversion Required

FINAL ANSWER

81.0763380890551 ≈ 81.07634 <-- Taylor's Constant

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Tool Life and Tool Wear » Taylor's Theory » Taylor's Intercept given Cutting Velocity and Tool Life

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Taylor's Theory Calculators

Taylor's Tool Life Exponent using Cutting Velocity and Taylor's Tool Life

LaTeX Go Taylor Tool Life Exponent = ln(Taylor's Constant/(Cutting Velocity*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)))/ln(Tool Life in Taylors Theory)

Taylor's Intercept given Cutting Velocity and Tool Life

LaTeX Go Taylor's Constant = Cutting Velocity*(Tool Life in Taylors Theory^Taylor Tool Life Exponent)*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut)

Taylor's Exponent if Ratios of Cutting Velocities, Tool Lives are given in Two Machining Conditions

LaTeX Go Taylor Tool Life Exponent = (-1)*ln(Ratio of Cutting Velocities)/ln(Ratio of Tool Lives)

Taylor's Tool Life given Cutting Velocity and Intercept

LaTeX Go Taylor's Tool Life = (Taylor's Constant/Cutting Velocity)^(1/Taylor Tool Life Exponent)

Taylor's Intercept given Cutting Velocity and Tool Life Formula

LaTeX Go

Modified Taylor's Tool Life Equation

The modified Taylor's Tool Life equation takes into account not only the effect of Cutting Speed during Machining but also the effects of Feed and Depth of Cut. It is given as:
VTⁿf^ad^b=C

How to Calculate Taylor's Intercept given Cutting Velocity and Tool Life?

Taylor's Intercept given Cutting Velocity and Tool Life calculator uses Taylor's Constant = Cutting Velocity*(Tool Life in Taylors Theory^Taylor Tool Life Exponent)*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut) to calculate the Taylor's Constant, The Taylor's Intercept given Cutting Velocity and Tool Life is a method to find the experimental Taylor's Constant or Intercept after practical data of tool machining have been tabulated. This is method is often used for drawing comparison between different Tools, Feed rate, and Depth of Cut. Taylor's Constant is denoted by C symbol.

How to calculate Taylor's Intercept given Cutting Velocity and Tool Life using this online calculator? To use this online calculator for Taylor's Intercept given Cutting Velocity and Tool Life, enter Cutting Velocity (V), Tool Life in Taylors Theory (L), Taylor Tool Life Exponent (y), Feed Rate (f), Taylor's Exponent for Feed Rate in Taylors Theory (a), Depth of Cut (d) & Taylor's Exponent for Depth of Cut (b) and hit the calculate button. Here is how the Taylor's Intercept given Cutting Velocity and Tool Life calculation can be explained with given input values -> 81.07634 = 0.833333*(4248^0.8466244)*(0.0007^0.2)*(0.013^0.24).

FAQ

What is Taylor's Intercept given Cutting Velocity and Tool Life?

The Taylor's Intercept given Cutting Velocity and Tool Life is a method to find the experimental Taylor's Constant or Intercept after practical data of tool machining have been tabulated. This is method is often used for drawing comparison between different Tools, Feed rate, and Depth of Cut and is represented as C = V*(L^y)*(f^a)*(d^b) or Taylor's Constant = Cutting Velocity*(Tool Life in Taylors Theory^Taylor Tool Life Exponent)*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut). Cutting Velocity is the velocity at the periphery of the cutter or workpiece (whichever is rotating), Tool Life in Taylors Theory is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations, Taylor Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear, Feed Rate is defined as the tool's distance travelled during one spindle revolution, Taylor's Exponent for Feed Rate in Taylors Theory is an experimental exponent used to draw a relation between feed rate to workpiece and tool life, Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction & Taylor's Exponent for Depth of Cut is an experimental exponent used to draw a relation between the depth of cut to workpiece and tool life.

How to calculate Taylor's Intercept given Cutting Velocity and Tool Life?

The Taylor's Intercept given Cutting Velocity and Tool Life is a method to find the experimental Taylor's Constant or Intercept after practical data of tool machining have been tabulated. This is method is often used for drawing comparison between different Tools, Feed rate, and Depth of Cut is calculated using Taylor's Constant = Cutting Velocity*(Tool Life in Taylors Theory^Taylor Tool Life Exponent)*(Feed Rate^Taylor's Exponent for Feed Rate in Taylors Theory)*(Depth of Cut^Taylor's Exponent for Depth of Cut). To calculate Taylor's Intercept given Cutting Velocity and Tool Life, you need Cutting Velocity (V), Tool Life in Taylors Theory (L), Taylor Tool Life Exponent (y), Feed Rate (f), Taylor's Exponent for Feed Rate in Taylors Theory (a), Depth of Cut (d) & Taylor's Exponent for Depth of Cut (b). With our tool, you need to enter the respective value for Cutting Velocity, Tool Life in Taylors Theory, Taylor Tool Life Exponent, Feed Rate, Taylor's Exponent for Feed Rate in Taylors Theory, Depth of Cut & Taylor's Exponent for Depth of Cut and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search