Surface to Volume Ratio of Bicone given Diameter and Height Calculator

✖Diameter of Bicone is a straight line passing from side to side through the center of the Bicone.ⓘ Diameter of Bicone [D]			+10% -10%
✖Height of Bicone is defined as the measurement of Bicone from top to bottom.ⓘ Height of Bicone [h]			+10% -10%

✖Surface to Volume Ratio of Bicone is fraction of surface area to volume of Bicone.ⓘ Surface to Volume Ratio of Bicone given Diameter and Height [R_A/V]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download 3D Geometry Formula PDF PDF Image

Surface to Volume Ratio of Bicone given Diameter and Height Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface to Volume Ratio of Bicone = (pi*Diameter of Bicone/2*sqrt((Height of Bicone/2)^2+(Diameter of Bicone/2)^2))/(1/3*pi*(Diameter of Bicone/2)^2*Height of Bicone/2)
R_A/V = (pi*D/2*sqrt((h/2)^2+(D/2)^2))/(1/3*pi*(D/2)^2*h/2)
This formula uses 1 Constants, 1 Functions, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Surface to Volume Ratio of Bicone - (Measured in 1 per Meter) - Surface to Volume Ratio of Bicone is fraction of surface area to volume of Bicone.
Diameter of Bicone - (Measured in Meter) - Diameter of Bicone is a straight line passing from side to side through the center of the Bicone.
Height of Bicone - (Measured in Meter) - Height of Bicone is defined as the measurement of Bicone from top to bottom.

STEP 1: Convert Input(s) to Base Unit

Diameter of Bicone: 10 Meter --> 10 Meter No Conversion Required
Height of Bicone: 30 Meter --> 30 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_A/V = (pi*D/2*sqrt((h/2)^2+(D/2)^2))/(1/3*pi*(D/2)^2*h/2) --> (pi*10/2*sqrt((30/2)^2+(10/2)^2))/(1/3*pi*(10/2)^2*30/2)

Evaluating ... ...

R_A/V = 0.632455532033676

STEP 3: Convert Result to Output's Unit

0.632455532033676 1 per Meter --> No Conversion Required

FINAL ANSWER

0.632455532033676 ≈ 0.632456 1 per Meter <-- Surface to Volume Ratio of Bicone

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Bicone » Surface to Volume Ratio of Bicone » Surface to Volume Ratio of Bicone given Diameter and Height

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has verified this Calculator and 1800+ more calculators!

< Surface to Volume Ratio of Bicone Calculators

Surface to Volume Ratio of Bicone given Diameter and Half Height

LaTeX Go Surface to Volume Ratio of Bicone = (pi*Diameter of Bicone*sqrt(Half Height of Bicone^2+(Diameter of Bicone/2)^2))/(2/3*pi*(Diameter of Bicone/2)^2*Half Height of Bicone)

Surface to Volume Ratio of Bicone given Diameter and Height

LaTeX Go Surface to Volume Ratio of Bicone = (pi*Diameter of Bicone/2*sqrt((Height of Bicone/2)^2+(Diameter of Bicone/2)^2))/(1/3*pi*(Diameter of Bicone/2)^2*Height of Bicone/2)

Surface to Volume Ratio of Bicone

LaTeX Go Surface to Volume Ratio of Bicone = (pi*Radius of Bicone*sqrt(Half Height of Bicone^2+Radius of Bicone^2))/(1/3*pi*Radius of Bicone^2*Half Height of Bicone)

Surface to Volume Ratio of Bicone given Radius and Height

LaTeX Go Surface to Volume Ratio of Bicone = (pi*Radius of Bicone*sqrt((Height of Bicone/2)^2+Radius of Bicone^2))/(1/3*pi*Radius of Bicone^2*Height of Bicone/2)

Surface to Volume Ratio of Bicone given Diameter and Height Formula

LaTeX Go

What is Bicone?

In geometry, a bicone or dicone is the three-dimensional surface of revolution of a rhombus around one of its axes of symmetry. Equivalently, a bicone is the surface created by joining two congruent, right, circular cones at their bases. A bicone has circular symmetry and orthogonal bilateral symmetry.

How to Calculate Surface to Volume Ratio of Bicone given Diameter and Height?

Surface to Volume Ratio of Bicone given Diameter and Height calculator uses Surface to Volume Ratio of Bicone = (pi*Diameter of Bicone/2*sqrt((Height of Bicone/2)^2+(Diameter of Bicone/2)^2))/(1/3*pi*(Diameter of Bicone/2)^2*Height of Bicone/2) to calculate the Surface to Volume Ratio of Bicone, The Surface to Volume Ratio of Bicone given Diameter and Height formula is defined as the fraction of the surface area of Bicone to its volume, and calculated using diameter and height of Bicone. Surface to Volume Ratio of Bicone is denoted by R_A/V symbol.

How to calculate Surface to Volume Ratio of Bicone given Diameter and Height using this online calculator? To use this online calculator for Surface to Volume Ratio of Bicone given Diameter and Height, enter Diameter of Bicone (D) & Height of Bicone (h) and hit the calculate button. Here is how the Surface to Volume Ratio of Bicone given Diameter and Height calculation can be explained with given input values -> 0.632456 = (pi*10/2*sqrt((30/2)^2+(10/2)^2))/(1/3*pi*(10/2)^2*30/2).

FAQ

What is Surface to Volume Ratio of Bicone given Diameter and Height?

The Surface to Volume Ratio of Bicone given Diameter and Height formula is defined as the fraction of the surface area of Bicone to its volume, and calculated using diameter and height of Bicone and is represented as R_A/V = (pi*D/2*sqrt((h/2)^2+(D/2)^2))/(1/3*pi*(D/2)^2*h/2) or Surface to Volume Ratio of Bicone = (pi*Diameter of Bicone/2*sqrt((Height of Bicone/2)^2+(Diameter of Bicone/2)^2))/(1/3*pi*(Diameter of Bicone/2)^2*Height of Bicone/2). Diameter of Bicone is a straight line passing from side to side through the center of the Bicone & Height of Bicone is defined as the measurement of Bicone from top to bottom.

How to calculate Surface to Volume Ratio of Bicone given Diameter and Height?

The Surface to Volume Ratio of Bicone given Diameter and Height formula is defined as the fraction of the surface area of Bicone to its volume, and calculated using diameter and height of Bicone is calculated using Surface to Volume Ratio of Bicone = (pi*Diameter of Bicone/2*sqrt((Height of Bicone/2)^2+(Diameter of Bicone/2)^2))/(1/3*pi*(Diameter of Bicone/2)^2*Height of Bicone/2). To calculate Surface to Volume Ratio of Bicone given Diameter and Height, you need Diameter of Bicone (D) & Height of Bicone (h). With our tool, you need to enter the respective value for Diameter of Bicone & Height of Bicone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface to Volume Ratio of Bicone?

In this formula, Surface to Volume Ratio of Bicone uses Diameter of Bicone & Height of Bicone. We can use 3 other way(s) to calculate the same, which is/are as follows -

Surface to Volume Ratio of Bicone = (pi*Radius of Bicone*sqrt(Half Height of Bicone^2+Radius of Bicone^2))/(1/3*pi*Radius of Bicone^2*Half Height of Bicone)
Surface to Volume Ratio of Bicone = (pi*Radius of Bicone*sqrt((Height of Bicone/2)^2+Radius of Bicone^2))/(1/3*pi*Radius of Bicone^2*Height of Bicone/2)
Surface to Volume Ratio of Bicone = (pi*Diameter of Bicone*sqrt(Half Height of Bicone^2+(Diameter of Bicone/2)^2))/(2/3*pi*(Diameter of Bicone/2)^2*Half Height of Bicone)

Home

FREE PDFs

🔍 Search