Surface Tension given Molar Volume Solution

STEP 0: Pre-Calculation Summary
Formula Used
Surface Tension of Fluid given Molar Volume = [EOTVOS_C]*(Critical Temperature-Temperature)/(Molar Volume)^(2/3)
γMV = [EOTVOS_C]*(Tc-T)/(Vm)^(2/3)
This formula uses 1 Constants, 4 Variables
Constants Used
[EOTVOS_C] - Eotvos constant Value Taken As 0.00000021
Variables Used
Surface Tension of Fluid given Molar Volume - (Measured in Newton per Meter) - Surface Tension of Fluid given Molar Volume is the energy or work required to increase the surface area of a fluid due to intermolecular forces.
Critical Temperature - (Measured in Kelvin) - Critical Temperature is the highest temperature at which the substance can exist as a liquid. At this phase boundaries vanish, and the substance can exist both as a liquid and vapor.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.
Molar Volume - (Measured in Cubic Meter per Mole) - Molar Volume is the volume occupied by one mole of a real gas at standard temperature and pressure.
STEP 1: Convert Input(s) to Base Unit
Critical Temperature: 190.55 Kelvin --> 190.55 Kelvin No Conversion Required
Temperature: 45 Kelvin --> 45 Kelvin No Conversion Required
Molar Volume: 22.4 Cubic Meter per Mole --> 22.4 Cubic Meter per Mole No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
γMV = [EOTVOS_C]*(Tc-T)/(Vm)^(2/3) --> [EOTVOS_C]*(190.55-45)/(22.4)^(2/3)
Evaluating ... ...
γMV = 3.84650373919517E-06
STEP 3: Convert Result to Output's Unit
3.84650373919517E-06 Newton per Meter -->0.00384650373919517 Millinewton per Meter (Check conversion ​here)
FINAL ANSWER
0.00384650373919517 0.003847 Millinewton per Meter <-- Surface Tension of Fluid given Molar Volume
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Pratibha
Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India
Pratibha has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has verified this Calculator and 1600+ more calculators!

Surface Tension Calculators

Surface Tension of Sea Water
​ LaTeX ​ Go Surface Tension of Sea Water = Surface Tension of Pure Water*(1+(3.766*10^(-4)*Reference Salinity)+(2.347*10^(-6)*Reference Salinity*Temperature in Degree Celsius))
Surface Tension of Pure Water
​ LaTeX ​ Go Surface Tension of Pure Water = 235.8*(1-(Temperature/Critical Temperature))^(1.256)*(1-(0.625*(1-(Temperature/Critical Temperature))))
Surface Tension Given Gibbs Free Energy
​ LaTeX ​ Go Surface Tension of Fluid = Gibbs Free Energy/Area of Surface
Surface Tension of Methane+Hexane System
​ LaTeX ​ Go Surface Tension of Methane+Hexane System = 0.64+(17.85*Concentration of Hexane)

Important Formulas on Surface Tension Calculators

Height of Magnitude of Capillary Rise
​ LaTeX ​ Go Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))
Parachor given Surface Tension
​ LaTeX ​ Go Parachor = (Molar Mass/(Density of Liquid-Density of Vapor))*(Surface Tension of Fluid)^(1/4)
Surface Pressure
​ LaTeX ​ Go Surface Pressure of Thin Film = Surface Tension of Clean Water Surface-Surface Tension of Fluid
Surface Tension for very Thin Plate using Wilhelmy-Plate Method
​ LaTeX ​ Go Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Surface Tension given Molar Volume Formula

​LaTeX ​Go
Surface Tension of Fluid given Molar Volume = [EOTVOS_C]*(Critical Temperature-Temperature)/(Molar Volume)^(2/3)
γMV = [EOTVOS_C]*(Tc-T)/(Vm)^(2/3)

What is the Eötvös Rule?

The Eötvös rule, named after the Hungarian physicist Loránd (Roland) Eötvös (1848–1919) enables the prediction of the surface tension of an arbitrary liquid pure substance at all temperatures. The density, molar mass, and the critical temperature of the liquid have to be known. At the critical point the surface tension is zero.

How to Calculate Surface Tension given Molar Volume?

Surface Tension given Molar Volume calculator uses Surface Tension of Fluid given Molar Volume = [EOTVOS_C]*(Critical Temperature-Temperature)/(Molar Volume)^(2/3) to calculate the Surface Tension of Fluid given Molar Volume, The Surface Tension given Molar Volume formula is defined as an empirical relationship between the surface tension of a liquid and the molar volume of liquid. Surface Tension of Fluid given Molar Volume is denoted by γMV symbol.

How to calculate Surface Tension given Molar Volume using this online calculator? To use this online calculator for Surface Tension given Molar Volume, enter Critical Temperature (Tc), Temperature (T) & Molar Volume (Vm) and hit the calculate button. Here is how the Surface Tension given Molar Volume calculation can be explained with given input values -> 2.789409 = [EOTVOS_C]*(190.55-45)/(22.4)^(2/3).

FAQ

What is Surface Tension given Molar Volume?
The Surface Tension given Molar Volume formula is defined as an empirical relationship between the surface tension of a liquid and the molar volume of liquid and is represented as γMV = [EOTVOS_C]*(Tc-T)/(Vm)^(2/3) or Surface Tension of Fluid given Molar Volume = [EOTVOS_C]*(Critical Temperature-Temperature)/(Molar Volume)^(2/3). Critical Temperature is the highest temperature at which the substance can exist as a liquid. At this phase boundaries vanish, and the substance can exist both as a liquid and vapor, Temperature is the degree or intensity of heat present in a substance or object & Molar Volume is the volume occupied by one mole of a real gas at standard temperature and pressure.
How to calculate Surface Tension given Molar Volume?
The Surface Tension given Molar Volume formula is defined as an empirical relationship between the surface tension of a liquid and the molar volume of liquid is calculated using Surface Tension of Fluid given Molar Volume = [EOTVOS_C]*(Critical Temperature-Temperature)/(Molar Volume)^(2/3). To calculate Surface Tension given Molar Volume, you need Critical Temperature (Tc), Temperature (T) & Molar Volume (Vm). With our tool, you need to enter the respective value for Critical Temperature, Temperature & Molar Volume and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!