Surface Tension given Correction Factor Calculator

✖Drop Weight is the weight of a drop of a liquid falling from a given opening used as a measure of the surface tension.ⓘ Drop Weight [m]			+10% -10%
✖Capillary Radius is the radius measured to the centerline of the capillary tube.ⓘ Capillary Radius [r_cap]			+10% -10%
✖Correction Factor is that which is multiplied with the result of an equation to correct for a known amount of systematic error.ⓘ Correction Factor [f]			+10% -10%

✖Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.ⓘ Surface Tension given Correction Factor [γ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Capillarity and Surface Forces in Liquids (Curved Surfaces) Formula PDF PDF Image

Surface Tension given Correction Factor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor)
γ = (m*[g])/(2*pi*r_cap*f)
This formula uses 2 Constants, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Surface Tension of Fluid - (Measured in Newton per Meter) - Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.
Drop Weight - (Measured in Kilogram) - Drop Weight is the weight of a drop of a liquid falling from a given opening used as a measure of the surface tension.
Capillary Radius - (Measured in Meter) - Capillary Radius is the radius measured to the centerline of the capillary tube.
Correction Factor - Correction Factor is that which is multiplied with the result of an equation to correct for a known amount of systematic error.

STEP 1: Convert Input(s) to Base Unit

Drop Weight: 0.8 Gram --> 0.0008 Kilogram (Check conversion here)
Capillary Radius: 32.5 Millimeter --> 0.0325 Meter (Check conversion here)
Correction Factor: 0.51 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ = (m*[g])/(2*pi*r_cap*f) --> (0.0008*[g])/(2*pi*0.0325*0.51)

Evaluating ... ...

γ = 0.0753316113506913

STEP 3: Convert Result to Output's Unit

0.0753316113506913 Newton per Meter -->75.3316113506913 Millinewton per Meter (Check conversion here)

FINAL ANSWER

75.3316113506913 ≈ 75.33161 Millinewton per Meter <-- Surface Tension of Fluid

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Capillarity and Surface Forces in Liquids (Curved Surfaces) » Surface Tension » Surface Tension given Correction Factor

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Surface Tension Calculators

Surface Tension of Sea Water

LaTeX Go Surface Tension of Sea Water = Surface Tension of Pure Water*(1+(3.766*10^(-4)*Reference Salinity)+(2.347*10^(-6)*Reference Salinity*Temperature in Degree Celsius))

Surface Tension of Pure Water

LaTeX Go Surface Tension of Pure Water = 235.8*(1-(Temperature/Critical Temperature))^(1.256)*(1-(0.625*(1-(Temperature/Critical Temperature))))

Surface Tension Given Gibbs Free Energy

LaTeX Go Surface Tension of Fluid = Gibbs Free Energy/Area of Surface

Surface Tension of Methane+Hexane System

LaTeX Go Surface Tension of Methane+Hexane System = 0.64+(17.85*Concentration of Hexane)

< Important Formulas on Surface Tension Calculators

Height of Magnitude of Capillary Rise

LaTeX Go Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))

Parachor given Surface Tension

LaTeX Go Parachor = (Molar Mass/(Density of Liquid-Density of Vapor))*(Surface Tension of Fluid)^(1/4)

Surface Pressure

LaTeX Go Surface Pressure of Thin Film = Surface Tension of Clean Water Surface-Surface Tension of Fluid

Surface Tension for very Thin Plate using Wilhelmy-Plate Method

LaTeX Go Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Surface Tension given Correction Factor Formula

LaTeX Go

Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor)
γ = (m*[g])/(2*pi*r_cap*f)

What is Stalagmometric method?

The stalagmometric method is one of the most common methods for measuring surface tension. The principle is to measure the weight of drops of a fluid of interest falling from a capillary glass tube, and thereby calculate the surface tension of the fluid.

What is Tate's Law?

According to Tate's law, the mass m of the falling drops depends on the surface tension, the inner capillary radius, and the acceleration due to gravity.

How to Calculate Surface Tension given Correction Factor?

Surface Tension given Correction Factor calculator uses Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor) to calculate the Surface Tension of Fluid, The Surface Tension given Correction Factor is defined as the property of the surface of a liquid that allows it to resist an external force, due to the cohesive nature of its molecules. Surface Tension of Fluid is denoted by γ symbol.

How to calculate Surface Tension given Correction Factor using this online calculator? To use this online calculator for Surface Tension given Correction Factor, enter Drop Weight (m), Capillary Radius (r_cap) & Correction Factor (f) and hit the calculate button. Here is how the Surface Tension given Correction Factor calculation can be explained with given input values -> 612.0693 = (0.0008*[g])/(2*pi*0.0325*0.51).

FAQ

What is Surface Tension given Correction Factor?

The Surface Tension given Correction Factor is defined as the property of the surface of a liquid that allows it to resist an external force, due to the cohesive nature of its molecules and is represented as γ = (m*[g])/(2*pi*r_cap*f) or Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor). Drop Weight is the weight of a drop of a liquid falling from a given opening used as a measure of the surface tension, Capillary Radius is the radius measured to the centerline of the capillary tube & Correction Factor is that which is multiplied with the result of an equation to correct for a known amount of systematic error.

How to calculate Surface Tension given Correction Factor?

The Surface Tension given Correction Factor is defined as the property of the surface of a liquid that allows it to resist an external force, due to the cohesive nature of its molecules is calculated using Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor). To calculate Surface Tension given Correction Factor, you need Drop Weight (m), Capillary Radius (r_cap) & Correction Factor (f). With our tool, you need to enter the respective value for Drop Weight, Capillary Radius & Correction Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface Tension of Fluid?

In this formula, Surface Tension of Fluid uses Drop Weight, Capillary Radius & Correction Factor. We can use 3 other way(s) to calculate the same, which is/are as follows -

Surface Tension of Fluid = Gibbs Free Energy/Area of Surface
Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall)
Surface Tension of Fluid = [EOTVOS_C]*(Critical Temperature-Temperature-6)/(Molecular Weight/Density of Liquid)^(2/3)

Home

FREE PDFs

🔍 Search