Surface Tension Force given Density of Fluid Calculator

✖The Radius of Tubing is the radius measured to the centerline of the tube.ⓘ Radius of Tubing [R]			+10% -10%
✖Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.ⓘ Density of Fluid [ρ_fluid]			+10% -10%
✖The Height of Capillary Rise/Fall is the level to which the water rises or falls in a capillary tube.ⓘ Height of Capillary Rise/Fall [h_c]			+10% -10%

✖Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.ⓘ Surface Tension Force given Density of Fluid [γ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Capillarity and Surface Forces in Liquids (Curved Surfaces) Formula PDF PDF Image

Surface Tension Force given Density of Fluid Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall)
γ = (1/2)*(R*ρ_fluid*[g]*h_c)
This formula uses 1 Constants, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Surface Tension of Fluid - (Measured in Newton per Meter) - Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.
Radius of Tubing - (Measured in Meter) - The Radius of Tubing is the radius measured to the centerline of the tube.
Density of Fluid - (Measured in Kilogram per Cubic Meter) - Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.
Height of Capillary Rise/Fall - (Measured in Meter) - The Height of Capillary Rise/Fall is the level to which the water rises or falls in a capillary tube.

STEP 1: Convert Input(s) to Base Unit

Radius of Tubing: 82 Millimeter --> 0.082 Meter (Check conversion here)
Density of Fluid: 14.9 Kilogram per Cubic Meter --> 14.9 Kilogram per Cubic Meter No Conversion Required
Height of Capillary Rise/Fall: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ = (1/2)*(R*ρ_fluid*[g]*h_c) --> (1/2)*(0.082*14.9*[g]*0.01)

Evaluating ... ...

γ = 0.05990882485

STEP 3: Convert Result to Output's Unit

0.05990882485 Newton per Meter -->59.90882485 Millinewton per Meter (Check conversion here)

FINAL ANSWER

59.90882485 ≈ 59.90882 Millinewton per Meter <-- Surface Tension of Fluid

(Calculation completed in 00.009 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Capillarity and Surface Forces in Liquids (Curved Surfaces) » Surface Tension » Surface Tension Force given Density of Fluid

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Surface Tension Calculators

Surface Tension of Sea Water

LaTeX Go Surface Tension of Sea Water = Surface Tension of Pure Water*(1+(3.766*10^(-4)*Reference Salinity)+(2.347*10^(-6)*Reference Salinity*Temperature in Degree Celsius))

Surface Tension of Pure Water

LaTeX Go Surface Tension of Pure Water = 235.8*(1-(Temperature/Critical Temperature))^(1.256)*(1-(0.625*(1-(Temperature/Critical Temperature))))

Surface Tension Given Gibbs Free Energy

LaTeX Go Surface Tension of Fluid = Gibbs Free Energy/Area of Surface

Surface Tension of Methane+Hexane System

LaTeX Go Surface Tension of Methane+Hexane System = 0.64+(17.85*Concentration of Hexane)

< Important Formulas on Surface Tension Calculators

Height of Magnitude of Capillary Rise

LaTeX Go Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))

Parachor given Surface Tension

LaTeX Go Parachor = (Molar Mass/(Density of Liquid-Density of Vapor))*(Surface Tension of Fluid)^(1/4)

Surface Pressure

LaTeX Go Surface Pressure of Thin Film = Surface Tension of Clean Water Surface-Surface Tension of Fluid

Surface Tension for very Thin Plate using Wilhelmy-Plate Method

LaTeX Go Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Surface Tension Force given Density of Fluid Formula

LaTeX Go

Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall)
γ = (1/2)*(R*ρ_fluid*[g]*h_c)

What do you mean by Capillary Force?

Capillary Force is the force caused by capillary phenomena which occur at the curved surface of the interface between matter in the liquid and solid or gas phase.

How magnitude of Surface Tension can determine?

The magnitude of Surface tension can be determined from the measured value height of capillary rise for a fluid with a known density of the fluid.

How to Calculate Surface Tension Force given Density of Fluid?

Surface Tension Force given Density of Fluid calculator uses Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall) to calculate the Surface Tension of Fluid, The Surface Tension Force given Density of Fluid is defined as a chemical phenomenon that happens at the surface of a liquid where the liquid becomes denser than the rest. Surface Tension of Fluid is denoted by γ symbol.

How to calculate Surface Tension Force given Density of Fluid using this online calculator? To use this online calculator for Surface Tension Force given Density of Fluid, enter Radius of Tubing (R), Density of Fluid (ρ_fluid) & Height of Capillary Rise/Fall (h_c) and hit the calculate button. Here is how the Surface Tension Force given Density of Fluid calculation can be explained with given input values -> 59908.82 = (1/2)*(0.082*14.9*[g]*0.01).

FAQ

What is Surface Tension Force given Density of Fluid?

The Surface Tension Force given Density of Fluid is defined as a chemical phenomenon that happens at the surface of a liquid where the liquid becomes denser than the rest and is represented as γ = (1/2)*(R*ρ_fluid*[g]*h_c) or Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall). The Radius of Tubing is the radius measured to the centerline of the tube, Density of Fluid is defined as the mass of fluid per unit volume of the said fluid & The Height of Capillary Rise/Fall is the level to which the water rises or falls in a capillary tube.

How to calculate Surface Tension Force given Density of Fluid?

The Surface Tension Force given Density of Fluid is defined as a chemical phenomenon that happens at the surface of a liquid where the liquid becomes denser than the rest is calculated using Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall). To calculate Surface Tension Force given Density of Fluid, you need Radius of Tubing (R), Density of Fluid (ρ_fluid) & Height of Capillary Rise/Fall (h_c). With our tool, you need to enter the respective value for Radius of Tubing, Density of Fluid & Height of Capillary Rise/Fall and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface Tension of Fluid?

In this formula, Surface Tension of Fluid uses Radius of Tubing, Density of Fluid & Height of Capillary Rise/Fall. We can use 3 other way(s) to calculate the same, which is/are as follows -

Surface Tension of Fluid = Gibbs Free Energy/Area of Surface
Surface Tension of Fluid = [EOTVOS_C]*(Critical Temperature-Temperature-6)/(Molecular Weight/Density of Liquid)^(2/3)
Surface Tension of Fluid = Force/(4*pi*Radius of Ring)

Home

FREE PDFs

🔍 Search