Surface Speed of workpiece given Metal removal rate during grinding Calculator

✖Material Removal Rate (MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as using a lathe or milling machine.ⓘ Material Removal Rate (MRR) [Z_m]			+10% -10%
✖The Feed is the distance the cutting tool advances along the length of the work for every revolution of the spindle.ⓘ The Feed [f_i]			+10% -10%
✖The Width of grinding path is defined as the width of material removed by the grinding wheel in a single pass over the workpiece.ⓘ The Width of Grinding Path [a_p]			+10% -10%

✖Surface Speed of Workpiece in Grinding is the speed at which the outer edge of the wheel moves relative to the workpiece being ground. It influences the material removal rate and surface finish.ⓘ Surface Speed of workpiece given Metal removal rate during grinding [v_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Grinding Operation Formula PDF PDF Image

Surface Speed of workpiece given Metal removal rate during grinding Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Speed of Workpiece in Grinding = Material Removal Rate (MRR)/(The Feed*The Width of Grinding Path)
v_w = Z_m/(f_i*a_p)
This formula uses 4 Variables

Variables Used

Surface Speed of Workpiece in Grinding - (Measured in Meter per Second) - Surface Speed of Workpiece in Grinding is the speed at which the outer edge of the wheel moves relative to the workpiece being ground. It influences the material removal rate and surface finish.
Material Removal Rate (MRR) - (Measured in Cubic Meter per Second) - Material Removal Rate (MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as using a lathe or milling machine.
The Feed - (Measured in Meter) - The Feed is the distance the cutting tool advances along the length of the work for every revolution of the spindle.
The Width of Grinding Path - (Measured in Meter) - The Width of grinding path is defined as the width of material removed by the grinding wheel in a single pass over the workpiece.

STEP 1: Convert Input(s) to Base Unit

Material Removal Rate (MRR): 0.0001 Cubic Meter per Second --> 0.0001 Cubic Meter per Second No Conversion Required
The Feed: 0.9 Millimeter --> 0.0009 Meter (Check conversion here)
The Width of Grinding Path: 1100.1 Millimeter --> 1.1001 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v_w = Z_m/(f_i*a_p) --> 0.0001/(0.0009*1.1001)

Evaluating ... ...

v_w = 0.101000919108364

STEP 3: Convert Result to Output's Unit

0.101000919108364 Meter per Second -->101.000919108364 Millimeter per Second (Check conversion here)

FINAL ANSWER

101.000919108364 ≈ 101.0009 Millimeter per Second <-- Surface Speed of Workpiece in Grinding

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Cylindrical Grinding cycle » Workpiece » Surface Speed of workpiece given Metal removal rate during grinding

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Workpiece Calculators

Diameter of workpiece given feed and machine infeed speed

LaTeX Go Grinding Workpiece Diameter = Workpiece Removal Parameter per Unit Time*Diameter of Grinding Tool Wheel*((Machine Infeed Speed/Feed Speed)-1)/Wheel Removal Parameter per Unit Time

Surface speed of workpiece given constant for grinding wheel

LaTeX Go Surface Speed of Workpiece in Grinding = (Maximum Undeformed Chip Thickness^2)*Surface Speed of Wheel in Grinding/(Constant for Particular Grinding Wheel*sqrt(The Feed))

Diameter of workpiece given Metal removal rate

LaTeX Go Grinding Workpiece Diameter = Metal Removal Rate (MRR)/(Feed Speed*pi*The Width of Grinding Path)

Surface Speed of workpiece given Metal removal rate during grinding

LaTeX Go Surface Speed of Workpiece in Grinding = Material Removal Rate (MRR)/(The Feed*The Width of Grinding Path)

Surface Speed of workpiece given Metal removal rate during grinding Formula

LaTeX Go

Surface Speed of Workpiece in Grinding = Material Removal Rate (MRR)/(The Feed*The Width of Grinding Path)
v_w = Z_m/(f_i*a_p)

Process of Grinding

Grinding is a machining process that's used to remove material from a workpiece via a grinding wheel. As the grinding wheel turns, it cuts material off the workpiece while creating a smooth surface texture in the process.

How to Calculate Surface Speed of workpiece given Metal removal rate during grinding?

Surface Speed of workpiece given Metal removal rate during grinding calculator uses Surface Speed of Workpiece in Grinding = Material Removal Rate (MRR)/(The Feed*The Width of Grinding Path) to calculate the Surface Speed of Workpiece in Grinding, Surface Speed of workpiece given Metal removal rate during grinding is the rate of Surface Speed of workpiece given Metal removal rate during grinding operations. it determine the speed of the surface rotating with respect to the grinding tool by material removal rate, feed, width of grinding path. Surface Speed of Workpiece in Grinding is denoted by v_w symbol.

How to calculate Surface Speed of workpiece given Metal removal rate during grinding using this online calculator? To use this online calculator for Surface Speed of workpiece given Metal removal rate during grinding, enter Material Removal Rate (MRR) (Z_m), The Feed (f_i) & The Width of Grinding Path (a_p) and hit the calculate button. Here is how the Surface Speed of workpiece given Metal removal rate during grinding calculation can be explained with given input values -> 606005.5 = 0.0001/(0.0009*1.1001).

FAQ

What is Surface Speed of workpiece given Metal removal rate during grinding?

Surface Speed of workpiece given Metal removal rate during grinding is the rate of Surface Speed of workpiece given Metal removal rate during grinding operations. it determine the speed of the surface rotating with respect to the grinding tool by material removal rate, feed, width of grinding path and is represented as v_w = Z_m/(f_i*a_p) or Surface Speed of Workpiece in Grinding = Material Removal Rate (MRR)/(The Feed*The Width of Grinding Path). Material Removal Rate (MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as using a lathe or milling machine, The Feed is the distance the cutting tool advances along the length of the work for every revolution of the spindle & The Width of grinding path is defined as the width of material removed by the grinding wheel in a single pass over the workpiece.

How to calculate Surface Speed of workpiece given Metal removal rate during grinding?

Surface Speed of workpiece given Metal removal rate during grinding is the rate of Surface Speed of workpiece given Metal removal rate during grinding operations. it determine the speed of the surface rotating with respect to the grinding tool by material removal rate, feed, width of grinding path is calculated using Surface Speed of Workpiece in Grinding = Material Removal Rate (MRR)/(The Feed*The Width of Grinding Path). To calculate Surface Speed of workpiece given Metal removal rate during grinding, you need Material Removal Rate (MRR) (Z_m), The Feed (f_i) & The Width of Grinding Path (a_p). With our tool, you need to enter the respective value for Material Removal Rate (MRR), The Feed & The Width of Grinding Path and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface Speed of Workpiece in Grinding?

In this formula, Surface Speed of Workpiece in Grinding uses Material Removal Rate (MRR), The Feed & The Width of Grinding Path. We can use 2 other way(s) to calculate the same, which is/are as follows -

Surface Speed of Workpiece in Grinding = (Maximum Undeformed Chip Thickness^2)*Surface Speed of Wheel in Grinding/(Constant for Particular Grinding Wheel*sqrt(The Feed))
Surface Speed of Workpiece in Grinding = Number of Workpiece Revolution*Workpiece Removal Parameter per Unit Time*Effective Stiffness/(2*The Width of Grinding Path)

Home

FREE PDFs

🔍 Search