Surface Pressure using Wilhelmy-Plate Method Calculator

✖The Change in Force is the difference between the initial and final force exerted on an object.ⓘ Change in Force [ΔF]			+10% -10%
✖Thickness of Plate is defined as the thickness of plate (usually the lowest dimension of the plate) under consideration.ⓘ Thickness of Plate [t]			+10% -10%
✖The Weight of Plate is defined as the force of attraction exerted on the plate by gravity.ⓘ Weight of Plate [W_plate]			+10% -10%

✖The Surface Pressure of Thin Film is the difference in interfacial tension between a clean interface and an interface in the presence of an emulsifier.ⓘ Surface Pressure using Wilhelmy-Plate Method [Π]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Capillarity and Surface Forces in Liquids (Curved Surfaces) Formula PDF PDF Image

Surface Pressure using Wilhelmy-Plate Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Pressure of Thin Film = -(Change in Force/(2*(Thickness of Plate+Weight of Plate)))
Π = -(ΔF/(2*(t+W_plate)))
This formula uses 4 Variables

Variables Used

Surface Pressure of Thin Film - (Measured in Pascal) - The Surface Pressure of Thin Film is the difference in interfacial tension between a clean interface and an interface in the presence of an emulsifier.
Change in Force - (Measured in Newton) - The Change in Force is the difference between the initial and final force exerted on an object.
Thickness of Plate - (Measured in Meter) - Thickness of Plate is defined as the thickness of plate (usually the lowest dimension of the plate) under consideration.
Weight of Plate - (Measured in Kilogram) - The Weight of Plate is defined as the force of attraction exerted on the plate by gravity.

STEP 1: Convert Input(s) to Base Unit

Change in Force: -0.015 Newton --> -0.015 Newton No Conversion Required
Thickness of Plate: 5000 Millimeter --> 5 Meter (Check conversion here)
Weight of Plate: 16.9 Gram --> 0.0169 Kilogram (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Π = -(ΔF/(2*(t+W_plate))) --> -((-0.015)/(2*(5+0.0169)))

Evaluating ... ...

Π = 0.00149494707887341

STEP 3: Convert Result to Output's Unit

0.00149494707887341 Pascal --> No Conversion Required

FINAL ANSWER

0.00149494707887341 ≈ 0.001495 Pascal <-- Surface Pressure of Thin Film

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Capillarity and Surface Forces in Liquids (Curved Surfaces) » Wilhelmy Plate Method » Surface Pressure using Wilhelmy-Plate Method

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Wilhelmy Plate Method Calculators

Force for Rectangular Plate using Wilhelmy-Plate Method

LaTeX Go Force = Weight of Plate+(Surface Force*((Surface Tension of Fluid*Perimeter of Plate)-Upward Drift))

Total Weight of Plate using Wilhelmy-Plate Method

LaTeX Go Total Weight of Solid Surface = Weight of Plate+Surface Tension of Fluid*(Perimeter)-Upward Drift

Total Weight of Ring using Ring-Detachment Method

LaTeX Go Total Weight of Solid Surface = Weight of Ring+(4*pi*Radius of Ring*Surface Tension of Fluid)

Surface Pressure using Wilhelmy-Plate Method

LaTeX Go Surface Pressure of Thin Film = -(Change in Force/(2*(Thickness of Plate+Weight of Plate)))

< Important Formulas on Surface Tension Calculators

Height of Magnitude of Capillary Rise

LaTeX Go Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))

Parachor given Surface Tension

LaTeX Go Parachor = (Molar Mass/(Density of Liquid-Density of Vapor))*(Surface Tension of Fluid)^(1/4)

Surface Pressure

LaTeX Go Surface Pressure of Thin Film = Surface Tension of Clean Water Surface-Surface Tension of Fluid

Surface Tension for very Thin Plate using Wilhelmy-Plate Method

LaTeX Go Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Surface Pressure using Wilhelmy-Plate Method Formula

LaTeX Go

Surface Pressure of Thin Film = -(Change in Force/(2*(Thickness of Plate+Weight of Plate)))
Π = -(ΔF/(2*(t+W_plate)))

What is Wilhelmy-Plate Method?

The Wilhelmy plate method for measuring interfacial tension uses a Wilhelmy plate that is pulled upward or pushed downward through an interface. In this method, the plate is oriented perpendicular to the interface, and the force exerted on it is measured.

How to Calculate Surface Pressure using Wilhelmy-Plate Method?

Surface Pressure using Wilhelmy-Plate Method calculator uses Surface Pressure of Thin Film = -(Change in Force/(2*(Thickness of Plate+Weight of Plate))) to calculate the Surface Pressure of Thin Film, The Surface Pressure using Wilhelmy-Plate Method formula is determined by measuring the change in force for a stationary plate between a clean surface and the same surface with a monolayer present. Surface Pressure of Thin Film is denoted by Π symbol.

How to calculate Surface Pressure using Wilhelmy-Plate Method using this online calculator? To use this online calculator for Surface Pressure using Wilhelmy-Plate Method, enter Change in Force (ΔF), Thickness of Plate (t) & Weight of Plate (W_plate) and hit the calculate button. Here is how the Surface Pressure using Wilhelmy-Plate Method calculation can be explained with given input values -> 0.001495 = -((-0.015)/(2*(5+0.0169))).

FAQ

What is Surface Pressure using Wilhelmy-Plate Method?

The Surface Pressure using Wilhelmy-Plate Method formula is determined by measuring the change in force for a stationary plate between a clean surface and the same surface with a monolayer present and is represented as Π = -(ΔF/(2*(t+W_plate))) or Surface Pressure of Thin Film = -(Change in Force/(2*(Thickness of Plate+Weight of Plate))). The Change in Force is the difference between the initial and final force exerted on an object, Thickness of Plate is defined as the thickness of plate (usually the lowest dimension of the plate) under consideration & The Weight of Plate is defined as the force of attraction exerted on the plate by gravity.

How to calculate Surface Pressure using Wilhelmy-Plate Method?

The Surface Pressure using Wilhelmy-Plate Method formula is determined by measuring the change in force for a stationary plate between a clean surface and the same surface with a monolayer present is calculated using Surface Pressure of Thin Film = -(Change in Force/(2*(Thickness of Plate+Weight of Plate))). To calculate Surface Pressure using Wilhelmy-Plate Method, you need Change in Force (ΔF), Thickness of Plate (t) & Weight of Plate (W_plate). With our tool, you need to enter the respective value for Change in Force, Thickness of Plate & Weight of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface Pressure of Thin Film?

In this formula, Surface Pressure of Thin Film uses Change in Force, Thickness of Plate & Weight of Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Surface Pressure of Thin Film = Surface Tension of Clean Water Surface-Surface Tension of Fluid

Home

FREE PDFs

🔍 Search