Total Surface Area of Ingot Calculator

✖Larger Rectangular Length of Ingot is the length of the longer pair of opposite sides of the larger rectangular face of the Ingot.ⓘ Larger Rectangular Length of Ingot [l_{Large Rectangle}]			+10% -10%
✖Larger Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the larger rectangular face of the Ingot.ⓘ Larger Rectangular Width of Ingot [w_{Large Rectangle}]			+10% -10%
✖Smaller Rectangular Length of Ingot is the length of the longer pair of opposite sides of the smaller rectangular face of the Ingot.ⓘ Smaller Rectangular Length of Ingot [l_{Small Rectangle}]			+10% -10%
✖Smaller Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the smaller rectangular face of the Ingot.ⓘ Smaller Rectangular Width of Ingot [w_{Small Rectangle}]			+10% -10%
✖Slant Height at Rectangular Lengths of Ingot is the height of slanted trapezoidal faces which connects the lengths of top and bottom rectangular faces of the Ingot.ⓘ Slant Height at Rectangular Lengths of Ingot [h_{Slant(Length)}]			+10% -10%
✖Slant Height at Rectangular Widths of Ingot is the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot.ⓘ Slant Height at Rectangular Widths of Ingot [h_Slant(Width)]			+10% -10%

✖Total Surface Area of Ingot is the total quantity of plane enclosed on the entire surface of the Ingot.ⓘ Total Surface Area of Ingot [TSA]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Ingot Formulas PDF PDF Image

Total Surface Area of Ingot Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Surface Area of Ingot = (Larger Rectangular Length of Ingot*Larger Rectangular Width of Ingot)+(Smaller Rectangular Length of Ingot*Smaller Rectangular Width of Ingot)+(Slant Height at Rectangular Lengths of Ingot*(Larger Rectangular Length of Ingot+Smaller Rectangular Length of Ingot))+(Slant Height at Rectangular Widths of Ingot*(Larger Rectangular Width of Ingot+Smaller Rectangular Width of Ingot))
TSA = (l_{Large Rectangle}*w_{Large Rectangle})+(l_{Small Rectangle}*w_{Small Rectangle})+(h_{Slant(Length)}*(l_{Large Rectangle}+l_{Small Rectangle}))+(h_Slant(Width)*(w_{Large Rectangle}+w_{Small Rectangle}))
This formula uses 7 Variables

Variables Used

Total Surface Area of Ingot - (Measured in Square Meter) - Total Surface Area of Ingot is the total quantity of plane enclosed on the entire surface of the Ingot.
Larger Rectangular Length of Ingot - (Measured in Meter) - Larger Rectangular Length of Ingot is the length of the longer pair of opposite sides of the larger rectangular face of the Ingot.
Larger Rectangular Width of Ingot - (Measured in Meter) - Larger Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the larger rectangular face of the Ingot.
Smaller Rectangular Length of Ingot - (Measured in Meter) - Smaller Rectangular Length of Ingot is the length of the longer pair of opposite sides of the smaller rectangular face of the Ingot.
Smaller Rectangular Width of Ingot - (Measured in Meter) - Smaller Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the smaller rectangular face of the Ingot.
Slant Height at Rectangular Lengths of Ingot - (Measured in Meter) - Slant Height at Rectangular Lengths of Ingot is the height of slanted trapezoidal faces which connects the lengths of top and bottom rectangular faces of the Ingot.
Slant Height at Rectangular Widths of Ingot - (Measured in Meter) - Slant Height at Rectangular Widths of Ingot is the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot.

STEP 1: Convert Input(s) to Base Unit

Larger Rectangular Length of Ingot: 50 Meter --> 50 Meter No Conversion Required
Larger Rectangular Width of Ingot: 25 Meter --> 25 Meter No Conversion Required
Smaller Rectangular Length of Ingot: 20 Meter --> 20 Meter No Conversion Required
Smaller Rectangular Width of Ingot: 10 Meter --> 10 Meter No Conversion Required
Slant Height at Rectangular Lengths of Ingot: 41 Meter --> 41 Meter No Conversion Required
Slant Height at Rectangular Widths of Ingot: 42 Meter --> 42 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

TSA = (l_{Large Rectangle}*w_{Large Rectangle})+(l_{Small Rectangle}*w_{Small Rectangle})+(h_{Slant(Length)}*(l_{Large Rectangle}+l_{Small Rectangle}))+(h_Slant(Width)*(w_{Large Rectangle}+w_{Small Rectangle})) --> (50*25)+(20*10)+(41*(50+20))+(42*(25+10))

Evaluating ... ...

TSA = 5790

STEP 3: Convert Result to Output's Unit

5790 Square Meter --> No Conversion Required

FINAL ANSWER

5790 Square Meter <-- Total Surface Area of Ingot

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Ingot » Surface Area of Ingot » Total Surface Area of Ingot » Total Surface Area of Ingot

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has verified this Calculator and 1800+ more calculators!

< Total Surface Area of Ingot Calculators

Total Surface Area of Ingot given Height

LaTeX Go Total Surface Area of Ingot = (Larger Rectangular Length of Ingot*Larger Rectangular Width of Ingot)+(Smaller Rectangular Length of Ingot*Smaller Rectangular Width of Ingot)+(sqrt(Height of Ingot^2+((Larger Rectangular Width of Ingot-Smaller Rectangular Width of Ingot)^2)/4)*(Larger Rectangular Length of Ingot+Smaller Rectangular Length of Ingot))+(sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4)*(Larger Rectangular Width of Ingot+Smaller Rectangular Width of Ingot))

Total Surface Area of Ingot

LaTeX Go Total Surface Area of Ingot = (Larger Rectangular Length of Ingot*Larger Rectangular Width of Ingot)+(Smaller Rectangular Length of Ingot*Smaller Rectangular Width of Ingot)+(Slant Height at Rectangular Lengths of Ingot*(Larger Rectangular Length of Ingot+Smaller Rectangular Length of Ingot))+(Slant Height at Rectangular Widths of Ingot*(Larger Rectangular Width of Ingot+Smaller Rectangular Width of Ingot))

Total Surface Area of Ingot Formula

LaTeX Go

What is Ingot?

A polyhedron shaped like an Ingot is made of two regularly opposite, parallel rectangles. These have the same ratio of length and width and are connected at their corners. It has 6 faces (2 rectangles, 4 isosceles trapezoids), 12 edges and 8 vertices.

How to Calculate Total Surface Area of Ingot?

Total Surface Area of Ingot calculator uses Total Surface Area of Ingot = (Larger Rectangular Length of Ingot*Larger Rectangular Width of Ingot)+(Smaller Rectangular Length of Ingot*Smaller Rectangular Width of Ingot)+(Slant Height at Rectangular Lengths of Ingot*(Larger Rectangular Length of Ingot+Smaller Rectangular Length of Ingot))+(Slant Height at Rectangular Widths of Ingot*(Larger Rectangular Width of Ingot+Smaller Rectangular Width of Ingot)) to calculate the Total Surface Area of Ingot, Total Surface Area of Ingot formula is defined as the total quantity of plane enclosed on the entire surface of the Ingot. Total Surface Area of Ingot is denoted by TSA symbol.

How to calculate Total Surface Area of Ingot using this online calculator? To use this online calculator for Total Surface Area of Ingot, enter Larger Rectangular Length of Ingot (l_{Large Rectangle}), Larger Rectangular Width of Ingot (w_{Large Rectangle}), Smaller Rectangular Length of Ingot (l_{Small Rectangle}), Smaller Rectangular Width of Ingot (w_{Small Rectangle}), Slant Height at Rectangular Lengths of Ingot (h_{Slant(Length)}) & Slant Height at Rectangular Widths of Ingot (h_Slant(Width)) and hit the calculate button. Here is how the Total Surface Area of Ingot calculation can be explained with given input values -> 5790 = (50*25)+(20*10)+(41*(50+20))+(42*(25+10)).

FAQ

What is Total Surface Area of Ingot?

Total Surface Area of Ingot formula is defined as the total quantity of plane enclosed on the entire surface of the Ingot and is represented as TSA = (l_{Large Rectangle}*w_{Large Rectangle})+(l_{Small Rectangle}*w_{Small Rectangle})+(h_{Slant(Length)}*(l_{Large Rectangle}+l_{Small Rectangle}))+(h_Slant(Width)*(w_{Large Rectangle}+w_{Small Rectangle})) or Total Surface Area of Ingot = (Larger Rectangular Length of Ingot*Larger Rectangular Width of Ingot)+(Smaller Rectangular Length of Ingot*Smaller Rectangular Width of Ingot)+(Slant Height at Rectangular Lengths of Ingot*(Larger Rectangular Length of Ingot+Smaller Rectangular Length of Ingot))+(Slant Height at Rectangular Widths of Ingot*(Larger Rectangular Width of Ingot+Smaller Rectangular Width of Ingot)). Larger Rectangular Length of Ingot is the length of the longer pair of opposite sides of the larger rectangular face of the Ingot, Larger Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the larger rectangular face of the Ingot, Smaller Rectangular Length of Ingot is the length of the longer pair of opposite sides of the smaller rectangular face of the Ingot, Smaller Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the smaller rectangular face of the Ingot, Slant Height at Rectangular Lengths of Ingot is the height of slanted trapezoidal faces which connects the lengths of top and bottom rectangular faces of the Ingot & Slant Height at Rectangular Widths of Ingot is the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot.

How to calculate Total Surface Area of Ingot?

Total Surface Area of Ingot formula is defined as the total quantity of plane enclosed on the entire surface of the Ingot is calculated using Total Surface Area of Ingot = (Larger Rectangular Length of Ingot*Larger Rectangular Width of Ingot)+(Smaller Rectangular Length of Ingot*Smaller Rectangular Width of Ingot)+(Slant Height at Rectangular Lengths of Ingot*(Larger Rectangular Length of Ingot+Smaller Rectangular Length of Ingot))+(Slant Height at Rectangular Widths of Ingot*(Larger Rectangular Width of Ingot+Smaller Rectangular Width of Ingot)). To calculate Total Surface Area of Ingot, you need Larger Rectangular Length of Ingot (l_{Large Rectangle}), Larger Rectangular Width of Ingot (w_{Large Rectangle}), Smaller Rectangular Length of Ingot (l_{Small Rectangle}), Smaller Rectangular Width of Ingot (w_{Small Rectangle}), Slant Height at Rectangular Lengths of Ingot (h_{Slant(Length)}) & Slant Height at Rectangular Widths of Ingot (h_Slant(Width)). With our tool, you need to enter the respective value for Larger Rectangular Length of Ingot, Larger Rectangular Width of Ingot, Smaller Rectangular Length of Ingot, Smaller Rectangular Width of Ingot, Slant Height at Rectangular Lengths of Ingot & Slant Height at Rectangular Widths of Ingot and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total Surface Area of Ingot?

In this formula, Total Surface Area of Ingot uses Larger Rectangular Length of Ingot, Larger Rectangular Width of Ingot, Smaller Rectangular Length of Ingot, Smaller Rectangular Width of Ingot, Slant Height at Rectangular Lengths of Ingot & Slant Height at Rectangular Widths of Ingot. We can use 1 other way(s) to calculate the same, which is/are as follows -

Total Surface Area of Ingot = (Larger Rectangular Length of Ingot*Larger Rectangular Width of Ingot)+(Smaller Rectangular Length of Ingot*Smaller Rectangular Width of Ingot)+(sqrt(Height of Ingot^2+((Larger Rectangular Width of Ingot-Smaller Rectangular Width of Ingot)^2)/4)*(Larger Rectangular Length of Ingot+Smaller Rectangular Length of Ingot))+(sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4)*(Larger Rectangular Width of Ingot+Smaller Rectangular Width of Ingot))

Home

FREE PDFs

🔍 Search