Surface Area of Bay for Flow through Inlet into Bay Calculator

✖Average Velocity in Channel for flow through inlet into the bay.ⓘ Average Velocity in Channel for Flow [V_avg]			+10% -10%
✖Average Area over the Channel Length is calculated with surface area of bay, change of bay elevation with time and average velocity in channel for flow.ⓘ Average Area over the Channel Length [A_avg]			+10% -10%
✖Change of Bay Elevation with Time is calculated with the average area over the channel length, average velocity in the channel for flow, and surface area of the bay.ⓘ Change of Bay Elevation with Time [d_Bay]			+10% -10%

✖Surface Area of Bay is defined as a small body of water set off from the main body.ⓘ Surface Area of Bay for Flow through Inlet into Bay [A_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Inlet Currents and Tidal Elevations Formulas PDF PDF Image

Surface Area of Bay for Flow through Inlet into Bay Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time
A_b = (V_avg*A_avg)/d_Bay
This formula uses 4 Variables

Variables Used

Surface Area of Bay - (Measured in Square Meter) - Surface Area of Bay is defined as a small body of water set off from the main body.
Average Velocity in Channel for Flow - (Measured in Meter per Second) - Average Velocity in Channel for flow through inlet into the bay.
Average Area over the Channel Length - (Measured in Square Meter) - Average Area over the Channel Length is calculated with surface area of bay, change of bay elevation with time and average velocity in channel for flow.
Change of Bay Elevation with Time - Change of Bay Elevation with Time is calculated with the average area over the channel length, average velocity in the channel for flow, and surface area of the bay.

STEP 1: Convert Input(s) to Base Unit

Average Velocity in Channel for Flow: 3.75 Meter per Second --> 3.75 Meter per Second No Conversion Required
Average Area over the Channel Length: 8 Square Meter --> 8 Square Meter No Conversion Required
Change of Bay Elevation with Time: 20 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_b = (V_avg*A_avg)/d_Bay --> (3.75*8)/20

Evaluating ... ...

A_b = 1.5

STEP 3: Convert Result to Output's Unit

1.5 Square Meter --> No Conversion Required

FINAL ANSWER

1.5 Square Meter <-- Surface Area of Bay

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Hydrodynamics of Tidal Inlets 1 » Inlet Hydrodynamics » Inlet Currents and Tidal Elevations » Surface Area of Bay for Flow through Inlet into Bay

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Inlet Currents and Tidal Elevations Calculators

Change of Bay Elevation with Time for Flow through Inlet into Bay

LaTeX Go Change of Bay Elevation with Time = (Average Area over the Channel Length*Average Velocity in Channel for Flow)/Surface Area of Bay

Average Area over Channel Length for Flow through Inlet into Bay

LaTeX Go Average Area over the Channel Length = (Surface Area of Bay*Change of Bay Elevation with Time)/Average Velocity in Channel for Flow

Average Velocity in Channel for Flow through Inlet into Bay

LaTeX Go Average Velocity in Channel for Flow = (Surface Area of Bay*Change of Bay Elevation with Time)/Average Area over the Channel Length

Surface Area of Bay for Flow through Inlet into Bay

LaTeX Go Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time

Surface Area of Bay for Flow through Inlet into Bay Formula

LaTeX Go

Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time
A_b = (V_avg*A_avg)/d_Bay

What are Seiches?

Seiches are standing waves or oscillations of the free surface of a body of water in a closed or semi-closed basin. These oscillations are of relatively long periods, extending from minutes in harbours and bays to over 10 hr in the Great Lakes. Any external perturbation to the lake or embayment can force an oscillation. In harbours, the forcing can be the result of short waves and wave groups at the harbour entrance. Examples include 30- to 400-sec wave-forced oscillations in the Los Angeles-Long Beach harbour (Seabergh 1985).

What is Inlet flow Pattern & Tidal Prism?

An Inlet has a "gorge" where flows converge before they expand again on the opposite side. Shoal (shallow) areas that extend backward and oceanward from the gorge depend on inlet hydraulics, wave conditions, and general geomorphology. All these interact to determine flow patterns in and around the inlet and locations where flow channels occur.
A Tidal Prism is the volume of water in an estuary or inlet between mean high tide and mean low tide, or the volume of water leaving an estuary at ebb tide. The inter-tidal prism volume can be expressed by the relationship: P=H A, where H is the average tidal range and A is the average surface area of the basin.

How to Calculate Surface Area of Bay for Flow through Inlet into Bay?

Surface Area of Bay for Flow through Inlet into Bay calculator uses Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time to calculate the Surface Area of Bay, The Surface Area of Bay for Flow through Inlet into Bay formula is defined as an area of a small body of water set off from the main body. Surface Area of Bay is denoted by A_b symbol.

How to calculate Surface Area of Bay for Flow through Inlet into Bay using this online calculator? To use this online calculator for Surface Area of Bay for Flow through Inlet into Bay, enter Average Velocity in Channel for Flow (V_avg), Average Area over the Channel Length (A_avg) & Change of Bay Elevation with Time (d_Bay) and hit the calculate button. Here is how the Surface Area of Bay for Flow through Inlet into Bay calculation can be explained with given input values -> 1.5 = (3.75*8)/20.

FAQ

What is Surface Area of Bay for Flow through Inlet into Bay?

The Surface Area of Bay for Flow through Inlet into Bay formula is defined as an area of a small body of water set off from the main body and is represented as A_b = (V_avg*A_avg)/d_Bay or Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time. Average Velocity in Channel for flow through inlet into the bay, Average Area over the Channel Length is calculated with surface area of bay, change of bay elevation with time and average velocity in channel for flow & Change of Bay Elevation with Time is calculated with the average area over the channel length, average velocity in the channel for flow, and surface area of the bay.

How to calculate Surface Area of Bay for Flow through Inlet into Bay?

The Surface Area of Bay for Flow through Inlet into Bay formula is defined as an area of a small body of water set off from the main body is calculated using Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time. To calculate Surface Area of Bay for Flow through Inlet into Bay, you need Average Velocity in Channel for Flow (V_avg), Average Area over the Channel Length (A_avg) & Change of Bay Elevation with Time (d_Bay). With our tool, you need to enter the respective value for Average Velocity in Channel for Flow, Average Area over the Channel Length & Change of Bay Elevation with Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface Area of Bay?

In this formula, Surface Area of Bay uses Average Velocity in Channel for Flow, Average Area over the Channel Length & Change of Bay Elevation with Time. We can use 2 other way(s) to calculate the same, which is/are as follows -

Surface Area of Bay = (Average Area over the Channel Length*Tidal Period*Maximum Cross Sectional Average Velocity)/(King’s Dimensionless Velocity*2*pi*Ocean Tide Amplitude)
Surface Area of Bay = Tidal Prism Filling Bay/(2*Bay Tide Amplitude)

Home

FREE PDFs

🔍 Search