Support Cultivation Practice given Sediment Yield from Individual Storm Solution

STEP 0: Pre-Calculation Summary
Formula Used
Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor)
P = Y/(11.8*(QV*qp)^0.56*K*Kzt*C)
This formula uses 7 Variables
Variables Used
Support Practice Factor - Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.
Sediment Yield from an Individual Storm - (Measured in Kilogram) - Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment.
Runoff Volume - (Measured in Cubic Meter) - Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point.
Peak Rate of Runoff - (Measured in Cubic Meter per Second) - Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm.
Soil Erodibility Factor - Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact.
Topographic factor - Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors.
Cover Management Factor - Cover Management Factor reflects the effect of cropping and management practices on erosion rates.
STEP 1: Convert Input(s) to Base Unit
Sediment Yield from an Individual Storm: 135.7332 Kilogram --> 135.7332 Kilogram No Conversion Required
Runoff Volume: 19.5 Cubic Meter --> 19.5 Cubic Meter No Conversion Required
Peak Rate of Runoff: 1.256 Cubic Meter per Second --> 1.256 Cubic Meter per Second No Conversion Required
Soil Erodibility Factor: 0.17 --> No Conversion Required
Topographic factor: 25 --> No Conversion Required
Cover Management Factor: 0.61 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = Y/(11.8*(QV*qp)^0.56*K*Kzt*C) --> 135.7332/(11.8*(19.5*1.256)^0.56*0.17*25*0.61)
Evaluating ... ...
P = 0.740000026355404
STEP 3: Convert Result to Output's Unit
0.740000026355404 --> No Conversion Required
FINAL ANSWER
0.740000026355404 0.74 <-- Support Practice Factor
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Modified Universal Soil Loss Equation Calculators

Storm Runoff Volume given Sediment Yield from Individual Storm
​ LaTeX ​ Go Runoff Volume = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Peak Rate of Runoff
Peak Rate of Runoff given Sediment Yield from Individual Storm
​ LaTeX ​ Go Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume
Support Cultivation Practice given Sediment Yield from Individual Storm
​ LaTeX ​ Go Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor)
Sediment Yield from Individual Storm
​ LaTeX ​ Go Sediment Yield from an Individual Storm = 11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor

Support Cultivation Practice given Sediment Yield from Individual Storm Formula

​LaTeX ​Go
Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor)
P = Y/(11.8*(QV*qp)^0.56*K*Kzt*C)

What is Topographic Factor?

The Topographic Factor is defined as the factors concerned with topography or physical features of an area are called topographic factors, including height, direction of slope and steepness of the slope.

What is Sediment Yield?

Sediment yield can be defined as the amount of sediment reaching or passing a point of interest in a given period of time, and sediment yield estimates are normally given as Tonnes per year or kilograms per year.

How to Calculate Support Cultivation Practice given Sediment Yield from Individual Storm?

Support Cultivation Practice given Sediment Yield from Individual Storm calculator uses Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor) to calculate the Support Practice Factor, The Support Cultivation Practice given Sediment Yield from Individual Storm formula is defined as the ratio of soil loss with support practices like contouring, strip-cropping or terracing to that with straight row farming up and down slope. Support Practice Factor is denoted by P symbol.

How to calculate Support Cultivation Practice given Sediment Yield from Individual Storm using this online calculator? To use this online calculator for Support Cultivation Practice given Sediment Yield from Individual Storm, enter Sediment Yield from an Individual Storm (Y), Runoff Volume (QV), Peak Rate of Runoff (qp), Soil Erodibility Factor (K), Topographic factor (Kzt) & Cover Management Factor (C) and hit the calculate button. Here is how the Support Cultivation Practice given Sediment Yield from Individual Storm calculation can be explained with given input values -> 0.638886 = 135.7332/(11.8*(19.5*1.256)^0.56*0.17*25*0.61).

FAQ

What is Support Cultivation Practice given Sediment Yield from Individual Storm?
The Support Cultivation Practice given Sediment Yield from Individual Storm formula is defined as the ratio of soil loss with support practices like contouring, strip-cropping or terracing to that with straight row farming up and down slope and is represented as P = Y/(11.8*(QV*qp)^0.56*K*Kzt*C) or Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor). Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment, Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point, Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm, Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact, Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors & Cover Management Factor reflects the effect of cropping and management practices on erosion rates.
How to calculate Support Cultivation Practice given Sediment Yield from Individual Storm?
The Support Cultivation Practice given Sediment Yield from Individual Storm formula is defined as the ratio of soil loss with support practices like contouring, strip-cropping or terracing to that with straight row farming up and down slope is calculated using Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor). To calculate Support Cultivation Practice given Sediment Yield from Individual Storm, you need Sediment Yield from an Individual Storm (Y), Runoff Volume (QV), Peak Rate of Runoff (qp), Soil Erodibility Factor (K), Topographic factor (Kzt) & Cover Management Factor (C). With our tool, you need to enter the respective value for Sediment Yield from an Individual Storm, Runoff Volume, Peak Rate of Runoff, Soil Erodibility Factor, Topographic factor & Cover Management Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!