Sum of Ordinates of Direct Runoff given Direct Runoff depth Calculator

✖Catchment Area for Hydrograph Analysis refers to an area of land where all water flows to a single stream, river, lake or even ocean.ⓘ Catchment Area for Hydrograph Analysis [A_HA]			+10% -10%
✖Surface Runoff refers to water, from rain, snowmelt, or other sources, that flows over the land surface, and is a major component of the water cycle.ⓘ Surface Runoff [S_r]			+10% -10%
✖A Time Interval refers to the amount of time required for the change from initial to the final state.ⓘ Time Interval [Δt]			+10% -10%

✖Sum of Ordinates refers to the summation of all the ordinates of direct runoff.ⓘ Sum of Ordinates of Direct Runoff given Direct Runoff depth [ΣO]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Sum of Ordinates of Direct Runoff given Direct Runoff depth Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sum of Ordinates = (Catchment Area for Hydrograph Analysis*Surface Runoff)/(0.36*Time Interval)
ΣO = (A_HA*S_r)/(0.36*Δt)
This formula uses 4 Variables

Variables Used

Sum of Ordinates - (Measured in Cubic Meter per Second) - Sum of Ordinates refers to the summation of all the ordinates of direct runoff.
Catchment Area for Hydrograph Analysis - (Measured in Square Meter) - Catchment Area for Hydrograph Analysis refers to an area of land where all water flows to a single stream, river, lake or even ocean.
Surface Runoff - (Measured in Cubic Meter per Second) - Surface Runoff refers to water, from rain, snowmelt, or other sources, that flows over the land surface, and is a major component of the water cycle.
Time Interval - (Measured in Second) - A Time Interval refers to the amount of time required for the change from initial to the final state.

STEP 1: Convert Input(s) to Base Unit

Catchment Area for Hydrograph Analysis: 581.04 Square Meter --> 581.04 Square Meter No Conversion Required
Surface Runoff: 0.009 Cubic Meter per Second --> 0.009 Cubic Meter per Second No Conversion Required
Time Interval: 5 Second --> 5 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ΣO = (A_HA*S_r)/(0.36*Δt) --> (581.04*0.009)/(0.36*5)

Evaluating ... ...

ΣO = 2.9052

STEP 3: Convert Result to Output's Unit

2.9052 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

2.9052 Cubic Meter per Second <-- Sum of Ordinates

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Surface Water Hydrology » Hydrograph Analysis » Sum of Ordinates of Direct Runoff given Direct Runoff depth

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Hydrograph Analysis Calculators

Catchment Area in sq km given Number of Days after Peak

LaTeX Go Catchment Area for Hydrograph Analysis = (Number of Days/0.84)^(1/0.2)

Number of Days after Peak given Area in sq km

LaTeX Go Number of Days = 0.84*(Catchment Area for Hydrograph Analysis)^(0.2)

Catchment Area in sq miles given Number of Days after Peak

LaTeX Go Catchment Area for Hydrograph Analysis = (Number of Days)^(1/0.2)

Number of Days after Peak given Area in sq miles

LaTeX Go Number of Days = (Area of Basin)^(0.2)

Sum of Ordinates of Direct Runoff given Direct Runoff depth Formula

LaTeX Go

Sum of Ordinates = (Catchment Area for Hydrograph Analysis*Surface Runoff)/(0.36*Time Interval)
ΣO = (A_HA*S_r)/(0.36*Δt)

What is Direct Runoff ?

Direct surface runoff is the rain or meltwater that runs off during the rain or melt event as overland flow or in the vegetation cover above a frozen soil. The meltwater and the rain falling onto snow or on frozen ground reach a stream along different pathways.

How to Calculate Sum of Ordinates of Direct Runoff given Direct Runoff depth?

Sum of Ordinates of Direct Runoff given Direct Runoff depth calculator uses Sum of Ordinates = (Catchment Area for Hydrograph Analysis*Surface Runoff)/(0.36*Time Interval) to calculate the Sum of Ordinates, The Sum of Ordinates of Direct Runoff given Direct Runoff depth is defined as the value of sum of ordinates of direct runoff when we have prior information of other parameters used. Sum of Ordinates is denoted by ΣO symbol.

How to calculate Sum of Ordinates of Direct Runoff given Direct Runoff depth using this online calculator? To use this online calculator for Sum of Ordinates of Direct Runoff given Direct Runoff depth, enter Catchment Area for Hydrograph Analysis (A_HA), Surface Runoff (S_r) & Time Interval (Δt) and hit the calculate button. Here is how the Sum of Ordinates of Direct Runoff given Direct Runoff depth calculation can be explained with given input values -> 2.9052 = (581.04*0.009)/(0.36*5).

FAQ

What is Sum of Ordinates of Direct Runoff given Direct Runoff depth?

The Sum of Ordinates of Direct Runoff given Direct Runoff depth is defined as the value of sum of ordinates of direct runoff when we have prior information of other parameters used and is represented as ΣO = (A_HA*S_r)/(0.36*Δt) or Sum of Ordinates = (Catchment Area for Hydrograph Analysis*Surface Runoff)/(0.36*Time Interval). Catchment Area for Hydrograph Analysis refers to an area of land where all water flows to a single stream, river, lake or even ocean, Surface Runoff refers to water, from rain, snowmelt, or other sources, that flows over the land surface, and is a major component of the water cycle & A Time Interval refers to the amount of time required for the change from initial to the final state.

How to calculate Sum of Ordinates of Direct Runoff given Direct Runoff depth?

The Sum of Ordinates of Direct Runoff given Direct Runoff depth is defined as the value of sum of ordinates of direct runoff when we have prior information of other parameters used is calculated using Sum of Ordinates = (Catchment Area for Hydrograph Analysis*Surface Runoff)/(0.36*Time Interval). To calculate Sum of Ordinates of Direct Runoff given Direct Runoff depth, you need Catchment Area for Hydrograph Analysis (A_HA), Surface Runoff (S_r) & Time Interval (Δt). With our tool, you need to enter the respective value for Catchment Area for Hydrograph Analysis, Surface Runoff & Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search