Stress in wire due to fluid pressure given bursting force due to fluid pressure Calculator

✖Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.ⓘ Force [F]			+10% -10%
✖Length of wire is the measurement or extent of wirer from end to end.ⓘ Length of wire [L]			+10% -10%
✖Thickness Of Wire is the distance through a wire.ⓘ Thickness Of Wire [t]			+10% -10%
✖Circumferential stress due to fluid pressure is a kind of tensile stress exerted on cylinder due to fluid pressure.ⓘ Circumferential Stress due to Fluid Pressure [σ_c]			+10% -10%
✖Diameter of Wire is the diameter of the wire in thread measurements.ⓘ Diameter of Wire [G_wire]			+10% -10%

✖Stress in wire due to fluid pressure is a kind of tensile stress exerted on wire due to fluid pressure.ⓘ Stress in wire due to fluid pressure given bursting force due to fluid pressure [σ_wf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Stress in wire due to fluid pressure given bursting force due to fluid pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Stress in wire due to fluid pressure = ((Force/Length of wire)-(2*Thickness Of Wire*Circumferential Stress due to Fluid Pressure))/((pi/2)*Diameter of Wire)
σ_wf = ((F/L)-(2*t*σ_c))/((pi/2)*G_wire)
This formula uses 1 Constants, 6 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Stress in wire due to fluid pressure - (Measured in Pascal) - Stress in wire due to fluid pressure is a kind of tensile stress exerted on wire due to fluid pressure.
Force - (Measured in Newton) - Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Length of wire - (Measured in Meter) - Length of wire is the measurement or extent of wirer from end to end.
Thickness Of Wire - (Measured in Meter) - Thickness Of Wire is the distance through a wire.
Circumferential Stress due to Fluid Pressure - (Measured in Pascal) - Circumferential stress due to fluid pressure is a kind of tensile stress exerted on cylinder due to fluid pressure.
Diameter of Wire - (Measured in Meter) - Diameter of Wire is the diameter of the wire in thread measurements.

STEP 1: Convert Input(s) to Base Unit

Force: 1.2 Kilonewton --> 1200 Newton (Check conversion here)
Length of wire: 3500 Millimeter --> 3.5 Meter (Check conversion here)
Thickness Of Wire: 1200 Millimeter --> 1.2 Meter (Check conversion here)
Circumferential Stress due to Fluid Pressure: 0.002 Megapascal --> 2000 Pascal (Check conversion here)
Diameter of Wire: 3.6 Millimeter --> 0.0036 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_wf = ((F/L)-(2*t*σ_c))/((pi/2)*G_wire) --> ((1200/3.5)-(2*1.2*2000))/((pi/2)*0.0036)

Evaluating ... ...

σ_wf = -788195.908645577

STEP 3: Convert Result to Output's Unit

-788195.908645577 Pascal -->-0.788195908645577 Megapascal (Check conversion here)

FINAL ANSWER

-0.788195908645577 ≈ -0.788196 Megapascal <-- Stress in wire due to fluid pressure

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Thin Cylinders And Spheres » Wire Winding of Thin Cylinders » Mechanical » Stress » Stress in wire due to fluid pressure given bursting force due to fluid pressure

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Stress Calculators

Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure

LaTeX Go Circumferential Stress due to Fluid Pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire)

Circumferential stress in cylinder given circumferential strain in cylinder

LaTeX Go Circumferential Stress due to Fluid Pressure = (Circumferential Strain*Young's Modulus Cylinder)+(Poisson's Ratio*Longitudinal Stress)

Circumferential stress due to fluid pressure given resisting force of cylinder

LaTeX Go Circumferential Stress due to Fluid Pressure = Force/(2*Length of wire*Thickness Of Wire)

Circumferential stress due to fluid pressure given resultant stress in cylinder

LaTeX Go Circumferential Stress due to Fluid Pressure = Resultant Stress+Compressive Circumferential Stress

< Stress Calculators

Internal diameter of vessel given hoop stress and efficiency of longitudinal joint

LaTeX Go Inner Diameter of Cylinderical Vessel = (Hoop Stress in Thin shell*2*Thickness Of Thin Shell*Efficiency of Longitudinal Joint)/(Internal Pressure in thin shell)

Longitudinal stress in thin cylindrical vessel given Longitudinal strain

LaTeX Go Longitudinal Stress Thick Shell = ((Longitudinal Strain*Modulus of Elasticity Of Thin Shell))+(Poisson's Ratio*Hoop Stress in Thin shell)

Efficiency of circumferential joint given longitudinal stress

LaTeX Go Efficiency of Circumferential Joint = (Internal Pressure in thin shell*Inner Diameter of Cylinderical Vessel)/(4*Thickness Of Thin Shell)

Efficiency of longitudinal joint given hoop stress

LaTeX Go Efficiency of Longitudinal Joint = (Internal Pressure in thin shell*Inner Diameter of Cylinderical Vessel)/(2*Thickness Of Thin Shell)

Stress in wire due to fluid pressure given bursting force due to fluid pressure Formula

LaTeX Go

Stress in wire due to fluid pressure = ((Force/Length of wire)-(2*Thickness Of Wire*Circumferential Stress due to Fluid Pressure))/((pi/2)*Diameter of Wire)
σ_wf = ((F/L)-(2*t*σ_c))/((pi/2)*G_wire)

Is a higher Young's modulus better?

The coefficient of proportionality is Young's modulus. The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus. Conversely, a very soft material such as fluid, would deform without force and would have zero Young's Modulus.

How to Calculate Stress in wire due to fluid pressure given bursting force due to fluid pressure?

Stress in wire due to fluid pressure given bursting force due to fluid pressure calculator uses Stress in wire due to fluid pressure = ((Force/Length of wire)-(2*Thickness Of Wire*Circumferential Stress due to Fluid Pressure))/((pi/2)*Diameter of Wire) to calculate the Stress in wire due to fluid pressure, The Stress in wire due to fluid pressure given bursting force due to fluid pressure formula is defined as the force acting on the unit area of a material. The effect of stress on a body is named as strain. Stress can deform the body. Stress in wire due to fluid pressure is denoted by σ_wf symbol.

How to calculate Stress in wire due to fluid pressure given bursting force due to fluid pressure using this online calculator? To use this online calculator for Stress in wire due to fluid pressure given bursting force due to fluid pressure, enter Force (F), Length of wire (L), Thickness Of Wire (t), Circumferential Stress due to Fluid Pressure (σ_c) & Diameter of Wire (G_wire) and hit the calculate button. Here is how the Stress in wire due to fluid pressure given bursting force due to fluid pressure calculation can be explained with given input values -> -7.9E-7 = ((1200/3.5)-(2*1.2*2000))/((pi/2)*0.0036).

FAQ

What is Stress in wire due to fluid pressure given bursting force due to fluid pressure?

The Stress in wire due to fluid pressure given bursting force due to fluid pressure formula is defined as the force acting on the unit area of a material. The effect of stress on a body is named as strain. Stress can deform the body and is represented as σ_wf = ((F/L)-(2*t*σ_c))/((pi/2)*G_wire) or Stress in wire due to fluid pressure = ((Force/Length of wire)-(2*Thickness Of Wire*Circumferential Stress due to Fluid Pressure))/((pi/2)*Diameter of Wire). Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity, Length of wire is the measurement or extent of wirer from end to end, Thickness Of Wire is the distance through a wire, Circumferential stress due to fluid pressure is a kind of tensile stress exerted on cylinder due to fluid pressure & Diameter of Wire is the diameter of the wire in thread measurements.

How to calculate Stress in wire due to fluid pressure given bursting force due to fluid pressure?

The Stress in wire due to fluid pressure given bursting force due to fluid pressure formula is defined as the force acting on the unit area of a material. The effect of stress on a body is named as strain. Stress can deform the body is calculated using Stress in wire due to fluid pressure = ((Force/Length of wire)-(2*Thickness Of Wire*Circumferential Stress due to Fluid Pressure))/((pi/2)*Diameter of Wire). To calculate Stress in wire due to fluid pressure given bursting force due to fluid pressure, you need Force (F), Length of wire (L), Thickness Of Wire (t), Circumferential Stress due to Fluid Pressure (σ_c) & Diameter of Wire (G_wire). With our tool, you need to enter the respective value for Force, Length of wire, Thickness Of Wire, Circumferential Stress due to Fluid Pressure & Diameter of Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Stress in wire due to fluid pressure?

In this formula, Stress in wire due to fluid pressure uses Force, Length of wire, Thickness Of Wire, Circumferential Stress due to Fluid Pressure & Diameter of Wire. We can use 3 other way(s) to calculate the same, which is/are as follows -

Stress in wire due to fluid pressure = Resultant Stress-Initial Winding Stress
Stress in wire due to fluid pressure = Young's Modulus Cylinder*Stress in Component
Stress in wire due to fluid pressure = (2*Force)/(Length of wire*pi*Diameter of Wire)

Home

FREE PDFs

🔍 Search