Stress of Beam of Uniform Strength Solution

STEP 0: Pre-Calculation Summary
Formula Used
Stress of Beam = (3*Point Load*Distance from A end)/(Width of Beam Section*Effective Depth of Beam^2)
σ = (3*P*a)/(B*de^2)
This formula uses 5 Variables
Variables Used
Stress of Beam - (Measured in Pascal) - Stress of Beam is the force per unit area applied to the material. The maximum stress a material can stand before it breaks is called the breaking stress or ultimate tensile stress.
Point Load - (Measured in Newton) - Point Load is the instantaneous load applied perpendicular to the specimen cross section.
Distance from A end - (Measured in Meter) - Distance from A end is the distance of the concentrated load from end A.
Width of Beam Section - (Measured in Meter) - Width of Beam Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration.
Effective Depth of Beam - (Measured in Meter) - The effective depth of beam measured from compressive face of beam to centroid of tensile reinforcing.
STEP 1: Convert Input(s) to Base Unit
Point Load: 0.15 Kilonewton --> 150 Newton (Check conversion ​here)
Distance from A end: 21 Millimeter --> 0.021 Meter (Check conversion ​here)
Width of Beam Section: 100.0003 Millimeter --> 0.1000003 Meter (Check conversion ​here)
Effective Depth of Beam: 285 Millimeter --> 0.285 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
σ = (3*P*a)/(B*de^2) --> (3*150*0.021)/(0.1000003*0.285^2)
Evaluating ... ...
σ = 1163.43141275285
STEP 3: Convert Result to Output's Unit
1163.43141275285 Pascal --> No Conversion Required
FINAL ANSWER
1163.43141275285 1163.431 Pascal <-- Stress of Beam
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verifier Image
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

Structural Analysis of Beams Calculators

Beam Depth of Uniform Strength for Simply Supported Beam when Load is at Centre
​ LaTeX ​ Go Effective Depth of Beam = sqrt((3*Point Load*Distance from A end)/(Width of Beam Section*Stress of Beam))
Beam Breadth of Uniform Strength for Simply Supported Beam when Load is at Centre
​ LaTeX ​ Go Width of Beam Section = (3*Point Load*Distance from A end)/(Stress of Beam*Effective Depth of Beam^2)
Loading of Beam of Uniform Strength
​ LaTeX ​ Go Point Load = (Stress of Beam*Width of Beam Section*Effective Depth of Beam^2)/(3*Distance from A end)
Stress of Beam of Uniform Strength
​ LaTeX ​ Go Stress of Beam = (3*Point Load*Distance from A end)/(Width of Beam Section*Effective Depth of Beam^2)

Beam of Uniform Strength Calculators

Beam Depth of Uniform Strength for Simply Supported Beam when Load is at Centre
​ LaTeX ​ Go Effective Depth of Beam = sqrt((3*Point Load*Distance from A end)/(Width of Beam Section*Stress of Beam))
Beam Breadth of Uniform Strength for Simply Supported Beam when Load is at Centre
​ LaTeX ​ Go Width of Beam Section = (3*Point Load*Distance from A end)/(Stress of Beam*Effective Depth of Beam^2)
Loading of Beam of Uniform Strength
​ LaTeX ​ Go Point Load = (Stress of Beam*Width of Beam Section*Effective Depth of Beam^2)/(3*Distance from A end)
Stress of Beam of Uniform Strength
​ LaTeX ​ Go Stress of Beam = (3*Point Load*Distance from A end)/(Width of Beam Section*Effective Depth of Beam^2)

Stress of Beam of Uniform Strength Formula

​LaTeX ​Go
Stress of Beam = (3*Point Load*Distance from A end)/(Width of Beam Section*Effective Depth of Beam^2)
σ = (3*P*a)/(B*de^2)

Define Stress & Strain Energy.

The stress definition in engineering says that stress is the force applied to an object divided by its cross-section area.
The strain energy is the energy stored in any body due to its deformation, also known as Resilience.

What is Eccentric Loading & Beam of Uniform Strength?

A load, whose line of action does not coincide with the axis of a column or a strut, is known as an eccentric load.
These beams have uniform cross section throughout their length. When they are loaded, there is a variation in bending moment from section to section along the length.

How to Calculate Stress of Beam of Uniform Strength?

Stress of Beam of Uniform Strength calculator uses Stress of Beam = (3*Point Load*Distance from A end)/(Width of Beam Section*Effective Depth of Beam^2) to calculate the Stress of Beam, The Stress of Beam of Uniform Strength formula is defined as the stress developed on the beam when the given loading is applied. Stress of Beam is denoted by σ symbol.

How to calculate Stress of Beam of Uniform Strength using this online calculator? To use this online calculator for Stress of Beam of Uniform Strength, enter Point Load (P), Distance from A end (a), Width of Beam Section (B) & Effective Depth of Beam (de) and hit the calculate button. Here is how the Stress of Beam of Uniform Strength calculation can be explained with given input values -> 1163.435 = (3*150*0.021)/(0.1000003*0.285^2).

FAQ

What is Stress of Beam of Uniform Strength?
The Stress of Beam of Uniform Strength formula is defined as the stress developed on the beam when the given loading is applied and is represented as σ = (3*P*a)/(B*de^2) or Stress of Beam = (3*Point Load*Distance from A end)/(Width of Beam Section*Effective Depth of Beam^2). Point Load is the instantaneous load applied perpendicular to the specimen cross section, Distance from A end is the distance of the concentrated load from end A, Width of Beam Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration & The effective depth of beam measured from compressive face of beam to centroid of tensile reinforcing.
How to calculate Stress of Beam of Uniform Strength?
The Stress of Beam of Uniform Strength formula is defined as the stress developed on the beam when the given loading is applied is calculated using Stress of Beam = (3*Point Load*Distance from A end)/(Width of Beam Section*Effective Depth of Beam^2). To calculate Stress of Beam of Uniform Strength, you need Point Load (P), Distance from A end (a), Width of Beam Section (B) & Effective Depth of Beam (de). With our tool, you need to enter the respective value for Point Load, Distance from A end, Width of Beam Section & Effective Depth of Beam and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!